Ping 192.168.2.2 not working with WP7702 but working with WP8548

mangOH Red
1

Hi!
I’m working with a mangoh red with the module WP7702 and following the instructions in the pdf I can’t get the ping 192.168.2.2 command to work. If I change the CF3 module to the WP8548, it works. Is there a configuration detail for the first execution that can solve the problem?
The green LED turns on in both cases.
Regards,
Marco.

2

Did you try to connect the console to see if the module boot ?

Try to reflash the latest firmware :slight_smile:
Put sw7 to on
Power on the board
Start the .exe file with the firmware and move sw7 to off just after

Look the result on the console

3

Thanks for the quick reply.
I’m working with Ubuntu 16.04 and I used the “Ubuntu version” of your instructions:

marco@marco-Inspiron-5567:~/Downloads$ swiflash -m WP77XX -i WP77xx_Release9_GENERIC_SPK.spk 
Detecting USB of the target
DONE
Communicating with the target
DONE
Switching to firmware download mode
......DONE
Downloading the firmware
................DONE
Rebooting the module
......DONE
Firmware Download SUCCESS
marco@marco-Inspiron-5567:~/Downloads$ ping 192.168.2.2
PING 192.168.2.2 (192.168.2.2) 56(84) bytes of data.
64 bytes from 192.168.2.2: icmp_seq=12 ttl=64 time=2.92 ms
64 bytes from 192.168.2.2: icmp_seq=13 ttl=64 time=0.615 ms
64 bytes from 192.168.2.2: icmp_seq=14 ttl=64 time=0.541 ms

It worked like a charm.

4

Good news.
Seems to be good