Its flashed correctly. I tried flashing the GCF and the SIERRA 13.3 releases and it got updated accordingly.
This is the uart log:
[ 1476.400767] diag: download mode set, Rebooting SoC…
[ 1476.409204] reboot: Restarting system
Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.2-00094
S - IMAGE_VARIANT_STRING=LAATANAZA
S - OEM_IMAGE_VERSION_STRING=jenkins
S - Boot Config, 0x000002e1
B - 1216 - PBL, Start
B - 3720 - bootable_media_detect_entry, Start
B - 4395 - bootable_media_detect_success, Start
B - 4399 - elf_loader_entry, Start
B - 7853 - auth_hash_seg_entry, Start
B - 31496 - auth_hash_seg_exit, Start
B - 82882 - elf_segs_hash_verify_entry, Start
B - 129945 - PBL, End
B - 138378 - SBL1, Start
B - 196206 - pm_device_init, Start
B - 216397 - PM_SET_VAL:Skip
D - 18788 - pm_device_init, Delta
B - 218044 - boot_config_data_table_init, Start
D - 0 - boot_config_data_table_init, Delta - (0 Bytes)
B - 226523 - CDT version:3,Platform ID:8,Major ID:1,Minor ID:0,Subtype:129
B - 233325 - sbl1_ddr_set_params, Start
B - 237168 - Pre_DDR_clock_init, Start
D - 213 - Pre_DDR_clock_init, Delta
D - 0 - sbl1_ddr_set_params, Delta
B - 249856 - pm_driver_init, Start
D - 4483 - pm_driver_init, Delta
B - 256200 - cpr_init, Start
D - 122 - cpr_init, Delta
B - 260775 - cpr_cx_mx_apc_vol_update, Start
D - 91 - cpr_cx_mx_apc_vol_update, Delta
B - 275964 - clock_init, Start
D - 152 - clock_init, Delta
B - 276208 - boot_flash_init, Start
D - 39894 - boot_flash_init, Delta
B - 319121 - boot_flash_swi_ddr_init, Start
D - 29280 - boot_flash_swi_ddr_init, Delta
B - 524722 - hw_family:5, hw_type:18, hw_rev:40
B - 529236 - SSMEM init OK
B - 551470 - USB non-zero endpoint requirements: 9 in, 5 out
B - 553727 - opening partition 0:SWIFOTA
B - 555313 - error for readpage:0
B - 558577 - DWL-get: ecnt=0 code=3
B - 574589 - Failed to read size: /swinv/item_files/CUST_IM_SWITCH_HIDE
B - 582336 - Failed to read size: /swinv/item_files/FOTA_PARTITION
B - 582977 - Failed to read size: /swinv/item_files/CUST_IM_CONFIG
B - 596061 - flags: u=1 e=1 obmsk=c,0
B - 607682 - ssmem_release: region 20 not exists
B - 607743 - ssmem_get: region 20 not exists
B - 615429 - smart recovery counter cleared
B - 615490 - DWL-ety: rea=1 rcv=0
B - 1147288 - Sahara over USB
B - 6739951 - Sahara: Hello pkt sent
B - 34782871 - ssmem_get: region 20 not exists
B - 34785250 - ssmem_get: region 20 not exists
B - 34785860 - ssmem_get: region 20 not exists
B - 46790507 - AUTH_SKIPPED=USER,STATUS=PASS
B - 478054�
Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.2-00094
S - IMAGE_VARIANT_STRING=LAATANAZA
S - OEM_IMAGE_VERSION_STRING=jenkins
S - Boot Config, 0x000002e1
B - 1216 - PBL, Start
B - 3720 - bootable_media_detect_entry, Start
B - 4395 - bootable_media_detect_success, Start
B - 4399 - elf_loader_entry, Start
B - 7853 - auth_hash_seg_entry, Start
B - 31496 - auth_hash_seg_exit, Start
B - 82885 - elf_segs_hash_verify_entry, Start
B - 129948 - PBL, End
B - 138348 - SBL1, Start
B - 196176 - pm_device_init, Start
B - 216367 - PM_SET_VAL:Skip
D - 18818 - pm_device_init, Delta
B - 218014 - boot_config_data_table_init, Start
D - 0 - boot_config_data_table_init, Delta - (0 Bytes)
B - 226493 - CDT version:3,Platform ID:8,Major ID:1,Minor ID:0,Subtype:129
B - 233294 - sbl1_ddr_set_params, Start
B - 237137 - Pre_DDR_clock_init, Start
D - 213 - Pre_DDR_clock_init, Delta
D - 0 - sbl1_ddr_set_params, Delta
B - 249825 - pm_driver_init, Start
D - 4483 - pm_driver_init, Delta
B - 256169 - cpr_init, Start
D - 122 - cpr_init, Delta
B - 260744 - cpr_cx_mx_apc_vol_update, Start
D - 91 - cpr_cx_mx_apc_vol_update, Delta
B - 275933 - clock_init, Start
D - 152 - clock_init, Delta
B - 276177 - boot_flash_init, Start
D - 39833 - boot_flash_init, Delta
B - 319060 - boot_flash_swi_ddr_init, Start
D - 29219 - boot_flash_swi_ddr_init, Delta
B - 524630 - hw_family:5, hw_type:18, hw_rev:40
B - 529144 - SSMEM init OK
B - 551409 - USB non-zero endpoint requirements: 9 in, 5 out
B - 553666 - opening partition 0:SWIFOTA
B - 555222 - error for readpage:0
B - 560529 - DWL-get: ecnt=0 code=0
B - 574376 - Failed to read size: /swinv/item_files/CUST_IM_SWITCH_HIDE
B - 582092 - Failed to read size: /swinv/item_files/FOTA_PARTITION
B - 582733 - Failed to read size: /swinv/item_files/CUST_IM_CONFIG
B - 595817 - flags: u=1 e=1 obmsk=c,0
B - 607468 - ssmem_release: region 20 not exists
B - 607529 - ssmem_get: region 20 not exists
B - 614697 - Image Load, Start
D - 93970 - QSEE Image Loaded, Delta - (489292 Bytes)
D - 213 - boot_pm_post_tz_device_init, Delta
B - 713059 - sbl1_efs_handle_cookies, Start
D - 0 - sbl1_efs_handle_cookies, Delta
B - 721050 - DEVCFG ELF verification failure
B - 724588 - Image Load, Start
D - 30 - SEC Image Loaded, Delta - (0 Bytes)
B - 732274 - Image Load, Start
D - 55205 - RPM Image Loaded, Delta - (152712 Bytes)
B - 788181 - Image Load, Start
B - 790499 - Auth disabled for image 9
B - 829874 - ssmem_get: region 20 not exists
D - 41754 - APPSBL Image Loaded, Delta - (379056 Bytes)
B - 833138 - QSEE Execution, Start
D - 1159 - QSEE Execution, Delta
B - 839848 - SBL1, End
D - 703879 - SBL1, Delta
S - Throughput, 8000 KB/s (1195924 Bytes, 136205 us)
S - DDR Frequency, 240 MHz
Android Bootloader - UART_DM Initialized!!!
[10] ERROR: No devinfo partition found
[10] Neither ‘config’ nor ‘frp’ partition found
[10] ERROR: No misc partition found
[1110] SSMEM init OK[1110] ssmem_get: region 20 not exists[1200] DEBUG: cmdline has root=
[1340] Channel alloc freed
[ 0.000000] GIC CPU mask not found - kernel will fail to boot.
[ 0.000000] GIC CPU mask not found - kernel will fail to boot.
[ 0.000000] MPM 1 irq mapping errored -517
[ 0.076739] SWI ssmem_framework_init: SSMEM init OK
[ 0.215456] spmi_pmic_arb 200f000.qcom,spmi: PMIC Arb Version-2 0x20010000
[ 0.231466] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
[ 0.234614] smd_channel_probe_now: allocation table not initialized
[ 0.242297] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
[ 0.270239] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
[ 0.273136] msm_thermal:get_kernel_cluster_info CPU0 topology not initialized.
[ 0.274057] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
[ 0.274074] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
[ 0.274823] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
[ 0.274840] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
[ 0.274856] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
[ 0.274868] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
[ 0.369914] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[ 0.371800] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[ 0.372085] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x30
[ 0.372143] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x30
[ 0.433646] msm_bus_fabric_init_driver
[ 0.649349] uart_tx_gpio is not available
[ 0.649369] uart_rx_gpio is not available
[ 0.649389] uart_cts_gpio is not available
[ 0.649408] uart_rfr_gpio is not available
[ 0.650190] sps: BAM device 0x07884000 is not registered yet.
[ 0.655056] uart_tx_gpio is not available
[ 0.655077] uart_rx_gpio is not available
[ 0.655097] uart_cts_gpio is not available
[ 0.655116] uart_rfr_gpio is not available
[ 0.859823] mdm9607-pinctrl 1000000.pinctrl: pin GPIO_4 already requested by 78b0000.uart; cannot claim for 78b0000.serial
[ 0.870295] mdm9607-pinctrl 1000000.pinctrl: pin-4 (78b0000.serial) status -22
[ 0.877442] mdm9607-pinctrl 1000000.pinctrl: could not request pin 4 (GPIO_4) from group gpio4 on device 1000000.pinctrl
[ 0.888414] msm_serial_hsl 78b0000.serial: Error applying setting, reverse things back
[ 0.946362] sps: BAM device 0x07984000 is not registered yet.
[ 1.031699] unable to find DT imem DLOAD mode node
[ 1.035754] unable to find DT imem EDLOAD mode node
[ 1.040746] unable to find DT imem dload-type node
[ 1.045259] Failed to disable secure wdog debug: -4
[ 1.076542] devfreq soc:qcom,cpubw: Couldn’t update frequency transition information.
[ 1.084608] sdhci_msm 7864900.sdhci: sdhci_msm_pm_qos_parse_irq: error -22 reading irq cpu
[ 1.092677] coresight_event: error registering on panic -38
[ 1.099580] coresight-tmc 6025000.tmc: failed to get flush cti
[ 1.104912] coresight-tmc 6025000.tmc: failed to get reset cti
[ 1.114220] NIDnT disabled, only sd mode supported.
[ 1.179685] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm_asoc_machine_probe, q6_state 0
[ 1.200675] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm_asoc_machine_probe, q6_state 0
[ 1.241163] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm_asoc_machine_probe, q6_state 0
[ 1.256103] calculate_residency: residency < 0 for LPM
[ 1.260826] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm_asoc_machine_probe, q6_state 0
[ 1.270471] parse_cpu_levels: idx 1 420
[ 1.273272] calculate_residency: residency < 0 for LPM
[ 1.290136] parse_cpu_levels: idx 2 500
[ 1.292941] parse_cpu_levels: idx 2 3040
[ 1.297803] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm_asoc_machine_probe, q6_state 0
[ 1.313692] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm_asoc_machine_probe, q6_state 0
ima: setting up IMA subsystem…
ima: feature not supported
The proc node does not exist
mount root fs from partition (rootfs|system)
Non-secure.
[ 1.493499] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm_asoc_machine_probe, q6_state 0
UBI device number 0, total 120 LEBs (30474240 bytes, 29.0 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB)
[ 1.884431] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm_asoc_machine_probe, q6_state 0
rootfs roothash: c4ecb89849f0dc3a98879d85562266ff6348195029413ea3facf16e4fdb6674f
rootfs: dev ‘/dev/ubiblock0_0’ ‘squashfs’
mount /dev/mapper/rt
rootfs: mounting took 0ms
rcS: Executing mount_essential_fs…
rcS: Executing simple_network…
rcS: Executing run_S_scripts…
S02mount_early: Executing mount_early_pseudo…
S02mount_early: Mounting SMACK security pseudo fs…
S02mount_early: Executing mount_early_other…
S02mount_early: Executing mount_early_create_dirs…
S02mount_early: Executing mount_early_set_timezone…
S02mount_early: Using timezone Universal…
S02mount_early: Executing yaffs2_kern_supported_init…
S02mount_early: Executing mount_early_user_start…
S02mount_early: RO rootfs fudge allowed.
S02mount_early: User is forcing userapp file system to be ubifs.
S02mount_early: Trying to mount UBIFS on /mnt/flash using [usrquota,grpquota,rw] mount options…
UBI device number 3, total 524 LEBs (133070848 bytes, 126.9 MiB), available 5 LEBs (1269760 bytes, 1.2 MiB), LEB size 253952 bytes (248.0 KiB)
S02mount_early: Performing quota check on file system mounted at /mnt/flash
S02mount_early: UBIFS volume successfully mounted on /mnt/flash
S02mount_early: Executing mount_early_legato_start…
mount Legato from partition lefwkro
S02mount_early: Non-secure.
UBI device number 2, total 35 LEBs (8888320 bytes, 8.4 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB)
S02mount_early: SQUASHFS successfully mounted on /mnt/legato
S02mount_early: Executing mount_early_userrw_start…
S02mount_early: Mounting swirw file system as UBIFS
S02mount_early: Trying to mount UBIFS on /mnt/userrw using [usrquota,grpquota,rw] mount options…
UBI device number 4, total 100 LEBs (25395200 bytes, 24.2 MiB), available 2 LEBs (507904 bytes, 496.0 KiB), LEB size 253952 bytes (248.0 KiB)
S02mount_early: Performing quota check on file system mounted at /mnt/userrw
S02mount_early: UBIFS volume successfully mounted on /mnt/userrw
S02mount_early: swirw mounted to /mnt/userrw
S03confighw.sh: Kernel internal entropy pool filler is available, increasing write_wakeup_threshold to 3072
Starting system message bus: dbus.
Loading modules: S07mount_unionfs: RO rootfs fudge allowed.
S07mount_unionfs: Overlay over /etc is allowed
S07mount_unionfs: Using timezone [Universal].
Mounting local filesystems…
[ 7.823422] UBIFS error (pid: 514): cannot open “ubi0:usrfs”, error -19mount: mounting ubi0:usrfs on /usr failed: No such device
mount modem from partition modem
MTD : Detected block device : /firmware for modem
UBI device number 1, total 128 LEBs (32505856 bytes, 31.0 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB)
Initializing random number generator…
Switching to composition sierra_dev (1199:68C0)
[ 11.051670] enable_store: android_usb: already disabled
SOFTAP_W_DUN: Y
Configuring network interfaces… done.
[ 11.702923] gbam_connect_work: gbam_connect_work: Bam channel is not ready
[ 11.714895] qti_ctrl_queue_notify: qti_ctrl_queue_notify: rmnet ctrl file handler cdb96300 is not openStarting syslogd/klogd:
done
ifconfig: SIOCGIFFLAGS: No such device
Starting diagrebootapp: done
$Starting qcom_time:
starting time-daemon
Starting time_services: done
Legato start sequence
start_at_cmux_le: Starting DS_MUX:
restart_at_uart: Mapped UART1 for AT service
start_at_cmux_le: Done start_at_cmux_le script.
update-ld-cache: Removing stale mount [/etc/ld.so.conf]…
update-ld-cache: Removing stale mount [/etc/ld.so.cache]…
update-ld-cache: Updating ld.so.cache using [/legato/systems/current/lib]…
update-ld-cache: Updating /etc/ld.so.cache …
[ 14.147918] i2c-msm-v2 78b8000.i2c: msm_bus_scale_register_client(mstr-id:86):0xc (ok)
[ 14.200800] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x30
[ 14.215866] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x30
update-ld-cache: Removing stale mount [/etc/ld.so.cache]…
cp: can’t stat ‘/etc/resolv.conf’: No such file or directory
mount: mounting /tmp/resolv.conf on /etc/resolv.conf failed: No such file or directory
[ 18.240529] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm_asoc_machine_probe, q6_state 0
[ 20.061823] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm_asoc_machine_probe, q6_state 0
[ 20.069476] M-Notify: General: 7
Finished Legato start Sequence
Starting reboot daemon: done
Starting atreset: done
Starting modem dependent daemons: Load modem done
Starting qmuxd: done
Starting thermal-engine: done
Starting irsc_util: Starting irsc tool
Failed to open file:/etc/sec_config
Absent/Invalid config,Default rules apply
Ending irsc tool
done
Starting netmgrd: done
Starting powerconfig for mdm9607: Starting fs-scrub-daemon: done
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.rp_filter = 1
rm: can’t remove ‘/var/log/wtmp’: No such file or directory
Starting eMBMs_TunnelingModule: done
Starting qmi_ip: done
starting DNS forwarder and DHCP server: dnsmasq… done.
Starting Dropbear SSH server: DONE
Starting port_bridge: done
cat: can’t open ‘/sys/devices/virtual/android_usb/android0/f_ecm/native_ethaddr’: No such file or directory
dropbear.
stopping DNS forwarder and DHCP server: dnsmasq… stopped /usr/bin/dnsmasq (pid 1041)
done.
starting DNS forwarder and DHCP server: dnsmasq… done.
run_getty.sh: ttyHSL1 reserved for CONSOLE
Poky (Yocto Project Reference Distro) 2.5.2 swi-mdm9x28-wp /dev/ttyHSL1
swi-mdm9x28-wp login: [ 23.965355] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:1) 0
[ 23.980402] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:1) mode:FIFO slv_addr:0x50
[ 23.996799] bq27xxx-battery 6-0055: error reading voltage
[ 24.001277] power_supply BQ27246: driver failed to report voltage_now' property: -107 [ 24.020580] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x50 [ 24.035358] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x50 [ 24.052147] bq27xxx-battery 6-0055: bus error on unseal: -107 [ 24.057386] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:1) mode:FIFO slv_addr:0x50 [ 24.072717] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:1) mode:FIFO slv_addr:0x50 [ 24.091208] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:1) mode:FIFO slv_addr:0x50 [ 24.106103] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:1) mode:FIFO slv_addr:0x50 [ 24.432774] bq27xxx-battery 6-0055: error reading voltage [ 24.511124] power_supply BQ27246: driver failed to report voltage_now’ property: -107
[ 24.587072] diag: In diag_send_feature_mask_update, control channel is not open, p: 0, c1017114
[ 84.163459] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:1) mode:FIFO slv_addr:0x50
[ 84.178242] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:1) mode:FIFO slv_addr:0x50
Poky (Yocto Project Reference Distro) 2.5.2 swi-mdm9x28-wp /dev/ttyHSL1
swi-mdm9x28-wp login: root
It is strongly recommended to setup credentials for remote login.
Please select one of the following options:
- Setup ssh keys and disable passwords-based authentication via ssh
(the most secure)
- Setup password (better than nothing)
- Do nothing
3
Would you like a reminder next time you log in [Y/n]?
y
OK, I will remind you next time.
root@swi-mdm9x28-wp:~# app sta
Unknown command ‘sta’. Try --help.
root@swi-mdm9x28-wp:~# app status
[running] atAirVantage
[running] atQmiLinker