DNS on Yellow fails

mangOH Yellow
1

On Red, we were able to curl to our own endpoint. On Yellow, names and addresses aren’t being resolved. How to fix?
We get a response from the DNS 52.17.142.62, but no response from anything else.
‘cm data connect’ fails in testing the connection.

root@swi-mdm9x28-wp:~# cm data connect
Checking if device ‘rmnet_data0’ is up … ok
Routing inet … ok
Updating /etc/resolv.conf … ok
Testing connection … failed

root@swi-mdm9x28-wp:~# cm data info
Index: 1
APN: iot.swir
PDP Type: IPV4V6
Connected: yes
Interface: rmnet_data0
Family[IPv4]: inet
IP[IPv4]: 10.16.2.183
Gateway[IPv4]: 10.16.2.184
Dns1[IPv4]: 52.17.142.62
Dns2[IPv4]: 52.17.142.62
root@swi-mdm9x28-wp:~# cm sim info
Type: EMBEDDED
ICCID: 89…
Home Network Operator: 208 24
EID: 89…
IMSI: 20…
Phone Number:
root@swi-mdm9x28-wp:~# cm info
Device: WP7702
IMEI: 35…
IMEISV: 4
FSN: 4L9…
Firmware Version: SWI9X06Y_02.32.02.00 c2e98c jenkins 2019/08/30 07:28:21
Bootloader Version: SWI9X06Y_02.32.02.00 c2e98c jenkins 2019/08/30 07:28:21
MCU Version: 002.013
PRI Part Number (PN): 990…
PRI Revision: 001.001
Carrier PRI Name: SIERRA
Carrier PRI Revision: 001.027_000
SKU: 1104405
Last Reset Cause: Power Down
Resets Count: Expected: 8 Unexpected: 0

2

On Yellow, if you have Octave apps installed you are directed to a private APN. If you disable Octave, then you go to third party site. Could you connect to your server through Octave?

3

Hello Ashish,
We would like to transmit direct to our own servers.
What’s involved in connecting through Octave? Could you point to the relevant section of your docs? I browsed and see the general overview graphic showing this, but I didn’t find any details.
Thanks

4

Hi there,
I am facing the same situation.
I am out of the 3 months Octave trial and want to test an app where the connection is direct to my server. How should I do ?
Thanks

5

Have you tried the non-octave firmware? You will need to use your own SIM as of today but we are looking at ways to use built in R2C sim.

1 Like
6

Hi,
Thank you for your answer.
Indeed, it works using non-Octave firmware + my own Sim, and updating the APN.
Thanks