ok i downloaded
and I started the exe.
now what should i do?
then you have the yocto image as mine
as said before for your case, I have no idea as we have already used the same software.
another question: I put talon in slot0, but led5 (under it) doesn’t work:
Could be it a problem?
Have I to do something when I insert Talon in mangOH green, or should I simply see the led 5 that turns on?
LED5 is OFF on my side.
Thanks, at least i’m sure that there aren’t hw issues
I inserted the card that allows me to access the pins to check that the commands written in the script start_can.sh actually worked.
sending the command ./start_can.sh green 1 with the oscilloscope I do not see anything, pin 7 remains at zero volts although in the script there is the command
echo 7 > /sys/class/gpio/export
echo out > /sys/class/gpio/gpio7/direction
echo 1 > /sys/class/gpio/gpio7/value
on the 5V and 3.3V pins I detect the voltage
i checked the schematic of mangoh green board, pin 7 of IOT slot 1 is “not connected”.
Sorry, why are there two files green.wp76xx? which one should I use?
[image]
[image]
This is rar file, you need to download two files to extract!!!
honestly, I didn’t understand how to do and after two weeks can0 doesn’t work… 
are you sure that your guide is for wp76xx? in the name of your mangOH file I see the name wp75…
is not that you did the tests only on the wp75 module instead of wp76? I really don’t know what to do anymore, I’m desperate
Honestly, i have no idea as we already used the same software
I think that the problem stays in yocto image…but you said that you didn’t do anything on yocto, so…
Have I to merge the two rar files? Believe me, I didn’t understand what do you mean…
sorry, have I to swice fw on the board with swice command?