I am having this issue. Could somebody help me to solve this?
To complete the installation, I enabled the OCTAVE by putting OCTAVE == 0. Otherwise, it could not work. And now I tried to set to 1 (see previously in forum: Make yellow error). Should I leave it to 0 or 1?
didn’t you can build it before?
You need to install the toolchain and go to the legato framework and set up the environment first:
e.g.
sh poky-swi-ext-glibc-x86_64-meta-toolchain-swi-armv7a-neon-toolchain-swi-SWI9X07Y_02.28.03.05.sh
Toolchain will be installed in /opt/swi/
cd legato-19.02.0/
make
. bin/configlegatoenv
Yes I built it before but did not pay attention to the errors. I am using leaf so I do not have a folder for legato. See what I have when doing a research
then how did you build it last time?
Oh you mean go back to OCTAVE==1 by modifying the code the same way I did? Octave == 1 is only if I want to connect to OCTAVE platform right?
no, in the previous post, you can build it without building the OCTAVE.
I manage to install leaf environment by putting OCTAVE == 0 but after it never achieved to build without error.
in the previous post, you can set up the toolchain path:
TOOLCHAIN_DIR=/home/marc/myWorkspace/leaf-data/MANGOH-YELLOW-WP77XX/mangOH-yellow-wp77xx-toolchain/sysroots/x86_64-pokysdk-linux/usr/bin/arm-poky-linux-gnueabi
TOOLCHAIN_PREFIX=arm-poky-linux-gnueabi-
OCTAVE=1
Maybe you need to go to the legato framework and type:
. bin/configlegatoenv
make wp77xx
Ok I will try but I noticed that I don’t have arm-poky-linux-gnueabi in the path you give
that path is coming out from your previous post!!!
Oh yes you right! Correction: I don’t have anymore the arm-poky-linux-gnueabi… It means that I need to reinstall? I am confused whether or not I have to follow this process to install toolchain. I thought that using leaf allows to avoid all these steps…
I think you need to redownload the package
Ok I reinstalled and it works! with the make yellow_wp77xx without error.
Thanks
