Hello, Recently I posted here: USB driver failing to find or power USBs - #5 by rauger1 about my usb driver not working on the new mangoh reds we purchased. It was suggested to me that we purchase the special WiFi module here: MIRAGE-PIFA Sierra Wireless by Talon | Development Boards, Kits, Program…

Ok adjusted the mangoh to receive power from a wall socket usb and I’m sshing using the other port, and I receive the same error

Here is the setup in case you’re wondering. When i set the required fields for wifi_ap, I still receive the -6 error and logread outputs the same. But dmesg -c doesnt show anything…: root@swi-mdm9x15:~# /sbin/ifup wlan0 Failed to start TI wifi root@swi-mdm9x15:~# dmesg -c root@swi-mdm9x15:~# …

Seems like the driver did load for you. Does the client mode work for you? We’ll try the AP mode tomorrow to test.

@rauger did you use the tiwifi script i sent to you? looks like your tiwifi script is still failing - i will try to send to you in a message again

@rauger tried again and here is my outputs: root@swi-mdm9x15:~# /sbin/ifup wlan0 root@swi-mdm9x15:~# dmesg -c [ 65.227804] gpio_sync_ri: RI owner is Modem [ 65.231008] ->gpio16 = 0 [ 65.231008] ->gpio17 = 0 [ 65.231039] ->gpio18 = 0 [ 65.231039] ->gpio19 = 0 [ 65.233236] gpio_syn…

@rauger in addition tried the wifi ap commands shown below - although FYI when i set up an AP i usually use the web application. This involves starting the wifiWebAp legato application and then I use a web browser with the url 192.168.2.2:8080. root@swi-mdm9x15:~# wifi ap setssid "RAUGER1" SSID s…

I re-tried the tiwifi script you sent me on a wp85 and wp 75 on the mangoh red with the same result. I tried the commands you suggest: root@swi-mdm9x15:~# wifi ap setssid “RAUGER1” SSID set successfully. root@swi-mdm9x15:~# wifi ap start ERROR:le_wifiAp_Start returns -6. logread WP85: Feb …

I also tried /sbin/ifup wlan0: root@swi-mdm9x15:~# /sbin/ifup wlan0 Failed to start TI wifi root@swi-mdm9x15:~# dmesg -c root@swi-mdm9x15:~# I copied the tiwifi that you sent me back from the board in /etc/init.d/tiwifi to the vm back to my mac just to be 100% sure that it was correct: tiwifi …

This is all on Mangoh Reds by the way. It all works on the mangoh Green.

Well, we should do a 30 minutes google hangout next week to walk you through what we did.

All wifi commands failing with Mirage board

mangOH Red

jyijyi July 12, 2021, 12:12pm 36

No problem is found for my testing

Topic		Replies	Views
WiFi on mangoOH Red mangOH Red	3	1994	February 21, 2018
MangOH Red [wp76xx] with Talon Mirage IoT [wl18xx] mangOH Red	15	1509	February 24, 2021
Application is not installed (MangOH Red WP8548) mangOH Red	21	3390	January 23, 2018
MangOH RED 77 - Wifi Client config mangOH Red	10	932	August 4, 2020
mangOH Red lost 192.168.2.2 IP & MT7697 Setup mangOH Red	50	5492	October 24, 2018

All wifi commands failing with Mirage board

Related topics