[SOLVED] Howto enable FTDI driver

mangOH Red Orange Starter Kit
1

Hi,

I d like to know how to enable FTDI driver ( serial USB <=> TTL ) on a mangOH Red With Legato and wp7702 :

root@swi-mdm9x28-wp:~# legato version
18.09.0-1-g8350546a_05025499e71b1dbb905fd75d6f797c3a_modified

What is the process ?

Regards

2

Last time I tried, on a mangOH Green, it just worked.

Have you tried it?

3

Hi,

I can’t see any ttyUSBx
dmesg output

[   38.191622] QTI:LINK_UP message posted
[   65.826467] usb 1-1.3: USB disconnect, device number 4
[   68.371117] usb 1-1.3: new full-speed USB device number 5 using msm_hsic_host
[   68.495506] usb 1-1.3: New USB device found, idVendor=0403, idProduct=6001
[   68.495526] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   68.495539] usb 1-1.3: Product: TTL232RG-VIP
[   68.495550] usb 1-1.3: Manufacturer: FTDI
[   68.495561] usb 1-1.3: SerialNumber: FTWTHVMG
root@swi-mdm9x28-wp:~#

/dev

root@swi-mdm9x28-wp:~# ls /dev/tty*
/dev/tty      /dev/tty12    /dev/tty17    /dev/tty21    /dev/tty26    /dev/tty30    /dev/tty35    /dev/tty4     /dev/tty44    /dev/tty49    /dev/tty53    /dev/tty58    /dev/tty62    /dev/ttyAT
/dev/tty0     /dev/tty13    /dev/tty18    /dev/tty22    /dev/tty27    /dev/tty31    /dev/tty36    /dev/tty40    /dev/tty45    /dev/tty5     /dev/tty54    /dev/tty59    /dev/tty63    /dev/ttyHS0
/dev/tty1     /dev/tty14    /dev/tty19    /dev/tty23    /dev/tty28    /dev/tty32    /dev/tty37    /dev/tty41    /dev/tty46    /dev/tty50    /dev/tty55    /dev/tty6     /dev/tty7     /dev/ttyHSL1
/dev/tty10    /dev/tty15    /dev/tty2     /dev/tty24    /dev/tty29    /dev/tty33    /dev/tty38    /dev/tty42    /dev/tty47    /dev/tty51    /dev/tty56    /dev/tty60    /dev/tty8
/dev/tty11    /dev/tty16    /dev/tty20    /dev/tty25    /dev/tty3     /dev/tty34    /dev/tty39    /dev/tty43    /dev/tty48    /dev/tty52    /dev/tty57    /dev/tty61    /dev/tty9
root@swi-mdm9x28-wp:~#

What tty can you see on your Green ?

Regards

4

Hi use FTDI on my board:
See this link : WP76 R9 and usb serial ftdi
You have to use this command " modprobe ftdi_sio" to enable FTDI

5

Thanks you, It works perfectly:

root@swi-mdm9x28-wp:~# modprobe ftdi_sio
root@swi-mdm9x28-wp:~# ls /dev/ttyUSB* 
/dev/ttyUSB0
1 Like