I am currently experiencing a system shutdown issue, described in mangOH Red + wp7603 – System shutdowns after installing textLoc (Low Power) sample app.
My current assumption is that some sort of power management configuration must have been updated in the root filesystem when I installed and executed the textLoc sample app, as I have already built and uploaded several legato system to my mangOH+wp7603 board and I still experience the shutdown issue.
I am now trying to rebuild the root file system to its original state using the Windows Developer Studio app:
But I am not able to successfully proceed with the root file system restore process. I am uploading the fdt2.exe output messages, as well as the USB console output messages, showing the firmware upload fail. Am I doing something wrong here? Thank you in advanced.
fdt2.exe console messages:
FDT version: 1.0.1702.1
Awaiting suitable port or adapter ...
Switching to boot & hold mode ...
Disabling selective suspend ...
Awaiting port removal ...
Awaiting download port ...
Switching to streaming mode ...
Downloading images ...
Writing image /
Flashing image -
Enabling selective suspend ...
Enabling selective suspend ...
Firmware download failed.
Primary error code: 77 - Failed in streaming download stage.
Secondary error code: 68 - Received incorrect response.
Device error code: 0x0 - Unknown device error code.
Preexisting images information:
Current:
Firmware:
ImageId: 002.068_000
BuildId: 02.28.03.03_GENERIC
Configuration:
ImageId: 002.068_000
BuildId: 02.28.03.03_GENERIC
Final images information:
Current:
Firmware:
ImageId:
BuildId:
Configuration:
ImageId:
BuildId:
OEM PRI:
IMEI:
Total time elapsed: 23594 ms.
Time to switch to boot mode: 19453 ms.
Images downloaded:
Image ID:
Build ID:
failed
Time to reset to application mode: -1 ms.
Press Enter to continue ...
mangOH USB console messages:
@▒ ▒B@▒
Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.2-00094
S - IMAGE_VARIANT_STRING=LAATANAZA
S - OEM_IMAGE_VERSION_STRING=jenkins
S - Boot Config, 0x000002e1
B - 1216 - PBL, Start
B - 3720 - bootable_media_detect_entry, Start
B - 5061 - bootable_media_detect_success, Start
B - 5065 - elf_loader_entry, Start
B - 8519 - auth_hash_seg_entry, Start
B - 32164 - auth_hash_seg_exit, Start
B - 83549 - elf_segs_hash_verify_entry, Start
B - 130615 - PBL, End
B - 118950 - SBL1, Start
B - 168451 - pm_device_init, Start
B - 186050 - PM_SET_VAL:Skip
D - 16317 - pm_device_init, Delta
B - 187361 - boot_config_data_table_init, Start
D - 0 - boot_config_data_table_init, Delta - (0 Bytes)
B - 196115 - CDT version:3,Platform ID:8,Major ID:1,Minor ID:0,Subtype:129
B - 203008 - sbl1_ddr_set_params, Start
B - 206820 - Pre_DDR_clock_init, Start
D - 213 - Pre_DDR_clock_init, Delta
D - 0 - sbl1_ddr_set_params, Delta
B - 219539 - pm_driver_init, Start
D - 4453 - pm_driver_init, Delta
B - 225791 - cpr_init, Start
D - 91 - cpr_init, Delta
B - 230488 - cpr_cx_mx_apc_vol_update, Start
D - 61 - cpr_cx_mx_apc_vol_update, Delta
B - 245677 - clock_init, Start
D - 152 - clock_init, Delta
B - 245891 - boot_flash_init, Start
D - 39802 - boot_flash_init, Delta
B - 288713 - boot_flash_swi_ddr_init, Start
D - 29249 - boot_flash_swi_ddr_init, Delta
B - 477416 - hw_family:5, hw_type:15, hw_rev:40
B - 481595 - cannot detect SSMEM base
B - 481656 - SSMEM bad, reinit
B - 483730 - SSMEM init OK
B - 507916 - USB non-zero endpoint requirements: 9 in, 5 out
B - 511302 - opening partition 0:SWIFOTA
B - 511942 - error for readpage:0
B - 516975 - DWL-get: ecnt=0 code=0
B - 532377 - Failed to read size: /swinv/item_files/CUST_IM_SWITCH_HIDE
B - 539697 - Failed to read size: /swinv/item_files/FOTA_PARTITION
B - 540338 - Failed to read size: /swinv/item_files/CUST_IM_CONFIG
B - 554124 - flags: u=1 e=1 obmsk=c,0
B - 555710 - ssmem_get: region 21 not exists
B - 566568 - ssmem_release: region 20 not exists
B - 566629 - ssmem_get: region 20 not exists
B - 573278 - Image Load, Start
D - 93909 - QSEE Image Loaded, Delta - (489292 Bytes)
D - 213 - boot_pm_post_tz_device_init, Delta
B - 671610 - sbl1_efs_handle_cookies, Start
D - 0 - sbl1_efs_handle_cookies, Delta
B - 679570 - DEVCFG ELF verification failure
B - 683139 - Image Load, Start
D - 30 - SEC Image Loaded, Delta - (0 Bytes)
B - 690794 - Image Load, Start
D - 55236 - RPM Image Loaded, Delta - (152712 Bytes)
B - 746731 - Image Load, Start
B - 749049 - Auth disabled for image 9
B - 788394 - ssmem_get: region 20 not exists
D - 41724 - APPSBL Image Loaded, Delta - (379056 Bytes)
B - 791658 - QSEE Execution, Start
D - 1006 - QSEE Execution, Delta
B - 798398 - SBL1, End
D - 681797 - SBL1, Delta
S - Throughput, 8000 KB/s (1195924 Bytes, 136113 us)
S - DDR Frequency, 240 MHz
Android Bootloader - UART_DM Initialized!!!
[10] ERROR: No devinfo partition found
[10] Neither 'config' nor 'frp' partition found
[10] ERROR: No misc partition found
[1110] SSMEM init OK[1110] ssmem_get: region 20 not exists[1200] DEBUG: cmdline has root=
[1340] Channel alloc freed
[ 0.000000] GIC CPU mask not found - kernel will fail to boot.
[ 0.000000] GIC CPU mask not found - kernel will fail to boot.
[ 0.000000] MPM 1 irq mapping errored -517
[ 0.076675] SWI ssmem_framework_init: SSMEM init OK
[ 0.215465] spmi_pmic_arb 200f000.qcom,spmi: PMIC Arb Version-2 0x20010000
[ 0.231426] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
[ 0.234572] smd_channel_probe_now: allocation table not initialized
[ 0.242273] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
[ 0.270209] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
[ 0.273108] msm_thermal:get_kernel_cluster_info CPU0 topology not initialized.
[ 0.274032] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
[ 0.274050] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
[ 0.274795] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
[ 0.274811] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
[ 0.274828] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
[ 0.274841] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
[ 0.369796] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[ 0.371671] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[ 0.371956] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x3a MSTR_STS:0x081343c8 OPER:0x00000090
[ 0.372013] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x3a MSTR_STS:0x081343c8 OPER:0x00000090
[ 0.444206] msm_bus_fabric_init_driver
[ 0.659947] uart_tx_gpio is not available
[ 0.659968] uart_rx_gpio is not available
[ 0.659988] uart_cts_gpio is not available
[ 0.660007] uart_rfr_gpio is not available
[ 0.660808] sps: BAM device 0x07884000 is not registered yet.
[ 0.665679] uart_tx_gpio is not available
[ 0.665700] uart_rx_gpio is not available
[ 0.665720] uart_cts_gpio is not available
[ 0.665739] uart_rfr_gpio is not available
[ 0.870485] mdm9607-pinctrl 1000000.pinctrl: pin GPIO_4 already requested by 78b0000.uart; cannot claim for 78b0000.serial
[ 0.880906] mdm9607-pinctrl 1000000.pinctrl: pin-4 (78b0000.serial) status -22
[ 0.888056] mdm9607-pinctrl 1000000.pinctrl: could not request pin 4 (GPIO_4) from group gpio4 on device 1000000.pinctrl
[ 0.899026] msm_serial_hsl 78b0000.serial: Error applying setting, reverse things back
[ 0.956970] sps: BAM device 0x07984000 is not registered yet.
[ 1.041486] unable to find DT imem DLOAD mode node
[ 1.045544] unable to find DT imem EDLOAD mode node
[ 1.050523] unable to find DT imem dload-type node
[ 1.055046] Failed to disable secure wdog debug: -4
[ 1.086330] devfreq soc:qcom,cpubw: Couldn't update frequency transition information.
[ 1.094403] sdhci_msm 7864900.sdhci: sdhci_msm_pm_qos_parse_irq: error -22 reading irq cpu
[ 1.102480] coresight_event: error registering on panic -38
[ 1.109369] coresight-tmc 6025000.tmc: failed to get flush cti
[ 1.114700] coresight-tmc 6025000.tmc: failed to get reset cti
[ 1.179100] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm_asoc_machine_probe, q6_state 0
[ 1.199966] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm_asoc_machine_probe, q6_state 0
[ 1.232952] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm_asoc_machine_probe, q6_state 0
[ 1.256675] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm_asoc_machine_probe, q6_state 0
[ 1.265564] calculate_residency: residency < 0 for LPM
[ 1.269662] parse_cpu_levels: idx 1 420
[ 1.285469] calculate_residency: residency < 0 for LPM
[ 1.289577] parse_cpu_levels: idx 2 500
[ 1.300135] parse_cpu_levels: idx 2 3040
[ 1.304003] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm_asoc_machine_probe, q6_state 0
[ 1.324312] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm_asoc_machine_probe, q6_state 0
ima: setting up IMA subsystem...
ima: feature not supported
The proc node does not exist
mount root fs from partition (rootfs|system)
Non-secure.
[ 1.503390] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm_asoc_machine_probe, q6_state 0
UBI device number 0, total 120 LEBs (30474240 bytes, 29.0 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB)
[ 1.894418] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm_asoc_machine_probe,
rootfs roothash: c4ecb89849f0dc3a98879d85562266ff6348195029413ea3facf16e4fdb6674f
rootfs: dev '/dev/ubiblock0_0' 'squashfs'
mount /dev/mapper/rt
rootfs: mounting took 0ms
rcS: Executing mount_essential_fs...
rcS: Executing simple_network...
rcS: Executing run_S_scripts...
S02mount_early: Executing mount_early_pseudo...
S02mount_early: Mounting SMACK security pseudo fs...
S02mount_early: Executing mount_early_other...
S02mount_early: Executing mount_early_create_dirs...
S02mount_early: Executing mount_early_set_timezone...
S02mount_early: Using timezone Universal...
S02mount_early: Executing yaffs2_kern_supported_init...
S02mount_early: Executing mount_early_user_start...
S02mount_early: RO rootfs fudge allowed.
S02mount_early: User is forcing userapp file system to be ubifs.
S02mount_early: Trying to mount UBIFS on /mnt/flash using [usrquota,grpquota,rw] mount options...
UBI device number 3, total 524 LEBs (133070848 bytes, 126.9 MiB), available 5 LEBs (1269760 bytes, 1.2 MiB), LEB size 253952 bytes (248.0 KiB)
S02mount_early: Performing quota check on file system mounted at /mnt/flash
S02mount_early: UBIFS volume successfully mounted on /mnt/flash
S02mount_early: Executing mount_early_legato_start...
mount Legato from partition lefwkro
S02mount_early: Non-secure.
UBI device number 2, total 35 LEBs (8888320 bytes, 8.4 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB)
S02mount_early: SQUASHFS successfully mounted on /mnt/legato
S02mount_early: Executing mount_early_userrw_start...
S02mount_early: Mounting swirw file system as UBIFS
S02mount_early: Trying to mount UBIFS on /mnt/userrw using [usrquota,grpquota,rw] mount options...
UBI device number 4, total 100 LEBs (25395200 bytes, 24.2 MiB), available 2 LEBs (507904 bytes, 496.0 KiB), LEB size 253952 bytes (248.0 KiB)
S02mount_early: Performing quota check on file system mounted at /mnt/userrw
S02mount_early: UBIFS volume successfully mounted on /mnt/userrw
S02mount_early: swirw mounted to /mnt/userrw
S03confighw.sh: Kernel internal entropy pool filler is available, increasing write_wakeup_threshold to 3072
Starting system message bus: dbus.
Loading modules: S07mount_unionfs: RO rootfs fudge allowed.
S07mount_unionfs: Overlay over /etc is allowed
S07mount_unionfs: Using timezone [Etc/GMT+7].
Mounting local filesystems...
[ 8.046806] UBIFS error (pid: 514): cannot open "ubi0:usrfs", error -19mount: mounting ubi0:usrfs on /usr failed: No such device
mount modem from partition modem
MTD : Detected block device : /firmware for modem
UBI device number 1, total 128 LEBs (32505856 bytes, 31.0 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB)
Initializing random number generator...
Switching to composition sierra_dev (1199:68C0)
[ 11.281518] enable_store: android_usb: already disabled
SOFTAP_W_DUN: Y
Configuring network interfaces... [ 11.591701] gbam_connect_work: gbam_connect_work: Bam channel is not ready
[ 11.686329] qti_ctrl_queue_notify: qti_ctrl_queue_notify: rmnet ctrl file handler cdb98300 is not open
[ 11.694546] qti_ctrl_queue_notify: qti_ctrl_queue_notify: rmnet ctrl file handler cdb98300 is not opendone.
Starting syslogd/klogd: done
Starting diagrebootapp: ifconfig: SIOCGIFFLAGS: No such device
done
$Starting qcom_time:
starting time-daemon
Starting time_services: done
Legato start sequence
restart_at_uart: NO UART map for AT service
start_at_cmux_le: Starting DS_MUX:
start_at_cmux_le: Done start_at_cmux_le script.
update-ld-cache: Removing stale mount [/etc/ld.so.conf]...
update-ld-cache: Removing stale mount [/etc/ld.so.cache]...
update-ld-cache: Updating ld.so.cache using [/legato/systems/current/lib]...
update-ld-cache: Updating /etc/ld.so.cache ...
[ 14.244628] i2c-msm-v2 78b8000.i2c: msm_bus_scale_register_client(mstr-id:86):0xc (ok)
[ 14.301327] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x3a MSTR_STS:0x001363c8 OPER:0x00000090
[ 14.316136] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x3a MSTR_STS:0x001363c8 OPER:0x00000090
update-ld-cache: Removing stale mount [/etc/ld.so.cache]...
Finished Legato start Sequence
Starting reboot daemon: done
Starting atreset: done
Starting modem dependent daemons: [ 22.519995] M-Notify: General: 7
Load modem done
Starting qmuxd: [ 22.725606] diag: In diag_send_feature_mask_update, control channel is not open, p: 0, c1017114
done
Starting thermal-engine: done
Starting irsc_util: Starting irsc tool
Failed to open file:/etc/sec_config
Absent/Invalid config,Default rules apply
Ending irsc tool
done
Starting netmgrd: done
Starting powerconfig for mdm9607: Starting fs-scrub-daemon: done
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.rp_filter = 1
rm: can't remove '/var/log/wtmp': No such file or directory
Starting eMBMs_TunnelingModule: done
Starting qmi_ip: done
starting DNS forwarder and DHCP server: dnsmasq... done.
Starting Dropbear SSH server: DONE
Starting port_bridge: cat: can't open '/sys/devices/virtual/android_usb/android0/f_ecm/native_ethaddr': No such file or directory
done
dropbear.
stopping DNS forwarder and DHCP server: dnsmasq... stopped /usr/bin/dnsmasq (pid 1316)
done.
starting DNS forwarder and DHCP server: dnsmasq... done.
run_getty.sh: ttyHSL1 reserved for CONSOLE
Poky (Yocto Project Reference Distro) 2.5.2 swi-mdm9x28-wp /dev/ttyHSL1
swi-mdm9x28-wp login: tzoneset: Changing timezone to [Etc/GMT+7]...
tzoneset: Changing timezone to [Etc/GMT+7]...
[ 30.586640] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x70 MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 30.602098] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x70 MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 30.617873] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x70 MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 30.634518] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x70 MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 30.649789] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x70 MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 30.665447] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x70 MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 37.213544] diag: In diag_process_hdlc_pkt, bad CRC. Dropping packet
[ 37.490361] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister wlan0
[ 37.540241] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister wlan0
[ 37.783130] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x70 MSTR_STS:0x091343c8 OPER:0x00000010
[ 37.798474] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x70 MSTR_STS:0x091343c8 OPER:0x00000010
[ 37.830703] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x70 MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 37.845643] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x70 MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 37.862370] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x70 MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 37.877654] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x70 MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 43.220454] diag: download mode set, Rebooting SoC..
[ 43.229267] reboot: Restarting system
Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.2-00094
S - IMAGE_VARIANT_STRING=LAATANAZA
S - OEM_IMAGE_VERSION_STRING=jenkins
S - Boot Config, 0x000002e1
B - 1216 - PBL, Start
B - 3720 - bootable_media_detect_entry, Start
B - 4379 - bootable_media_detect_success, Start
B - 4383 - elf_loader_entry, Start
B - 7837 - auth_hash_seg_entry, Start
B - 31502 - auth_hash_seg_exit, Start
B - 82888 - elf_segs_hash_verify_entry, Start
B - 129950 - PBL, End
B - 138500 - SBL1, Start
B - 196389 - pm_device_init, Start
B - 216611 - PM_SET_VAL:Skip
D - 18483 - pm_device_init, Delta
B - 217922 - boot_config_data_table_init, Start
D - 30 - boot_config_data_table_init, Delta - (0 Bytes)
B - 226676 - CDT version:3,Platform ID:8,Major ID:1,Minor ID:0,Subtype:129
B - 233569 - sbl1_ddr_set_params, Start
B - 237381 - Pre_DDR_clock_init, Start
D - 213 - Pre_DDR_clock_init, Delta
D - 0 - sbl1_ddr_set_params, Delta
B - 250100 - pm_driver_init, Start
D - 4483 - pm_driver_init, Delta
B - 256352 - cpr_init, Start
D - 122 - cpr_init, Delta
B - 261019 - cpr_cx_mx_apc_vol_update, Start
D - 91 - cpr_cx_mx_apc_vol_update, Delta
B - 276208 - clock_init, Start
D - 152 - clock_init, Delta
B - 276452 - boot_flash_init, Start
D - 39802 - boot_flash_init, Delta
B - 319304 - boot_flash_swi_ddr_init, Start
D - 29249 - boot_flash_swi_ddr_init, Delta
B - 526308 - hw_family:5, hw_type:15, hw_rev:40
B - 531249 - SSMEM init OK
B - 553575 - USB non-zero endpoint requirements: 9 in, 5 out
B - 556259 - opening partition 0:SWIFOTA
B - 557387 - error for readpage:0
B - 560651 - DWL-get: ecnt=0 code=3
B - 578127 - Failed to read size: /swinv/item_files/CUST_IM_SWITCH_HIDE
B - 585417 - Failed to read size: /swinv/item_files/FOTA_PARTITION
B - 586057 - Failed to read size: /swinv/item_files/CUST_IM_CONFIG
B - 599843 - flags: u=1 e=1 obmsk=c,0
B - 611494 - ssmem_release: region 20 not exists
B - 611555 - ssmem_get: region 20 not exists
B - 618753 - smart recovery counter cleared
B - 618814 - DWL-ety: rea=1 rcv=0
B - 805261 - Sahara over USB
B - 865773 - Sahara: Hello pkt sent
B - 2600033 - not allowed to write UAPP partition
B - 2600430 - BOOT_HOLD=3,DOWNLOADER=boot,VERSION=Thu Feb 1 13:07:31 PST 2018,TYPE=APPL,SUBIMAGE=UAPP,ERROR=Flash write failed: Not allowed (0X97),STATUS=FAIL