MangoH board running on battery

mangOH Red
1

Hi,

As i’m completely new to the MangoH Boards and its environment, Few Questions are here from my side to get clarity on as follows,

1.Does mangoH Red/Yellow can be run on a battery sand-alone, without using any SBC’s like Raspberry pi/Beagle Bone Black.

2.How shall i Flash,build and clean the image for MangoH boards? whether internal Flash/External SD card is present?

Thanks
Shiva.

2
  1. as far as the battery can give correct voltage, then that is fine
  2. to flash image, you can see:
    http://mangoh.io/uploaded-documents/Reference/mangOH%20Red/Discover/Getting%20Started/41113734%20mangOH%20Red%20GSG%20-%20HTML5-Responsive%20HTML5/#t=41113734_mangOH_Red_GSG_-_HTML5%2F41112261_Firmware%2F41112261_Firmware.htm

to build application:

3

Thanks for the Reply, will go through the links posted.