IoT breakout board pin mapping

[asyal]

Hi Kas,

Please see this post

GPIO not working

I’m trying to read the GPIOs, using the supplied gpioCf3 example as a basis. http://legato.io/legato-docs/latest/sampleApps_gpioCf3.html But it doesn’t work: I’ve set all the GPIOs as inputs with pullups, yet some of them read as zero! When I apply 0V or 1.8V (via 1k resistor) the values read do not change, and change event handlers are not called. The voltage at the GPIOs is ~ 0.3 - 0.4 V. For each input, the setup looks like this: //-------------------------------------------------------…

cheers,
Ashish