We are evaluating the WP with mango board and having an issue to autostart the Airvantage service. (fw: SWI9X15Y_07.11.22.00, Legato version 16.10.1) It works fine when started manually sends statuses according to the setting but after reboot the service simply does not connect to Airvantage.
Current configuration:
AT+WDSC?
+WDSC: 0,0
+WDSC: 1,1 //it should be 0 by default according to the AT manual
+WDSC: 2,1 //it should be 0 by default according to the AT manual
+WDSC: 3,1 //only changed this value from 15 --> 1, (does not work with 15 either)
+WDSC: 4,0
OK
AT+WDSE
OK
AT+WDSG
+WDSG: 0,3
+WDSG: 1,0
OK
Airvantage login starts only manually with command:
AT+WDSS=1,1
It wasn’t evident for me from the AT documentation. I think you should be able to configure the airvantage agent with only at commands without an extra app/configuration as it is with non legato modules (if i remember correctly) It makes me confused!
When you try at+wdss command, the module is connected to AirVantage.
You may do at+wdss=1,0 in order to stop the connection. You may see:
+WDSI: 8 (for success)
at+wdsc=3,1 is a bit low. I prefer you set at+wdsc=3,2 (2 minutes).
at+wdsc command works. Do you have some +WDSI notification if you do nothing each 2 minutes?
experience was that it worked till the reset but after repower the module forgot the setting but i will double check it again a try out the AirVantageControl app and i will let you know!
Strange things, the module is keeping now the settings after reset so at+wdsc=3,x works. I haven’t done anything differently, or at least i don’t know about it.
Thanks for the help!
BTW, We would like to update the application with Airvantage.
I have tried to update the app several times but i always get update failure. Should i open an other topic? Here is the log:
I have received this sometimes:
avcDaemon[511]/avcAppUpdate T=main | avcAppUpdate.c Object9FieldActivityHandler() 1481 | Duplicate attempt detected.
But usually i get these messages:
avcDaemon[517]/avcDaemon T=main | avcServer.c QueryUninstall() 717 | Automatically accepting uninstall
Mar 12 19:05:54 | avcDaemon[517]/avcDaemon T=main | assetData.c assetData_DeleteInstance() 3160 | Deleting instance tmCore/0/0
Mar 12 19:05:54 | avcDaemon[517]/avcDaemon T=main | assetData.c assetData_DeleteInstance() 3160 | Deleting instance tmCore/1/0
/* Here i See that my application sends some debug messages, so obviously delete was not successful*/
/* After 60 seconds */
avcDaemon[517]/le_pa_avc T=unknown | pa_avc_qmi.c ProcessAvmsState() 358 | Received User App update
Mar 12 19:06:54 | avcDaemon[517]/le_pa_avc T=unknown | pa_avc_qmi.c ProcessAvmsState() 406 | Download failed. Avms update_complete_status 500.
After some restart the Mangoh board does not connect to the Airvantage again. I have also tested it with a “brand” new Mangoh with different Sim card and it shows the same behaviour.
AT+WDSC?
+WDSC: 0,0
+WDSC: 1,0
+WDSC: 2,0
+WDSC: 3,10
+WDSC: 4,0
OK
And the application update is not working either. What is he meaning of the Customer ID in the firmware? (1102816 by me)
Isn’t it possible that there is a problem with avcService? I presume it is checking these AT settings.
I will try out the AirVantage control application later but the avcService should be as robust as possible…
I tried the AirVantage control application and it works. I used the le_avc_SetPollingTimer() function and it seems to do the job. Only using AT commands the avcDaeom sometimes “forgets” to connect to the airvantage after reboot. I still have issue updating the application, i opened a new topic for it here:
