WP7702 how to enable ethernet IoT card?

[jyijyi]

please see here:

Setting up MangOH Red as Router to Cellular Gateway

Objective: Configure a MangOH to route cellular internet data to/from other network interfaces. For example the image below shows how we will route traffic to/from the ethernet IoT slot to/from the cellular gateway. [IMG_2399] Solution: To configure the MangOH to route data to/from network interfaces to/from the public cellular interface execute the following steps: A. For wired interfaces, i.e. eth0 run the following steps: Download the cfg_gateway.sh script to the MangOH device (als…

You might also add the following to start the card:

echo 2 > /sys/class/gpio/export
echo out > /sys/class/gpio/gpio2/direction
echo 1 > /sys/class/gpio/gpio2/value