# WP7607 issues with MangOH red board (rev 5)

**URL:** <https://mangoh.discourse.group/t/wp7607-issues-with-mangoh-red-board-rev-5/1189>\
**Category:** mangOH Red\
**Created:** [February 21, 2018, 9:07am UTC](https://mangoh.discourse.group/t/wp7607-issues-with-mangoh-red-board-rev-5/1189 "2018-02-21T09:07:29Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Souhail](https://avatars.discourse-cdn.com/v4/letter/s/a698b9/32.png) [@Souhail](https://mangoh.discourse.group/u/Souhail)\
**Post date:** [February 21, 2018, 9:07am UTC](https://mangoh.discourse.group/t/wp7607-issues-with-mangoh-red-board-rev-5/1189/1 "2018-02-21T09:07:29Z")

</div>

Hello,

Can you help me with some issues that I encoutred with WP7607 on a mangOH Red. In fact I succeded to configurate both wifi and bluetooth with the IOT shield on mangOH Red with WP8548. Since we need to use the WP7606, I removed the WP858 chips and installed the WP7607, instead. I noticed that the ATI port is no longer availabe in the perepherics More than that I could not flash the official firmware from sierrawireless website neether to access it with ssh interface. Can you please help me with this.

Best regards,

---

<div class="post-metadata">

**Author:** ![Souhail](https://avatars.discourse-cdn.com/v4/letter/s/a698b9/32.png) [@Souhail](https://mangoh.discourse.group/u/Souhail)\
**Post date:** [February 21, 2018, 10:31am UTC](https://mangoh.discourse.group/t/wp7607-issues-with-mangoh-red-board-rev-5/1189/2 "2018-02-21T10:31:10Z")

</div>

I tried with a new WP7607, I installed it in the shiedl then I access to it via ssh interface. Every thing work fine, until I made a firmeware update with the official relaese R7.0.1 (Generic — GCF) . After that I noticed that the WP7607 is rebooting in a loop !!! Any one have an idea about what is hapening. Thank you.

Best regards

---

<div class="post-metadata">

**Author:** ![asyal](https://sea2.discourse-cdn.com/flex016/user_avatar/mangoh.discourse.group/asyal/32/78_2.png) [@asyal](https://mangoh.discourse.group/u/asyal)\
**Post date:** [February 21, 2018, 12:51pm UTC](https://mangoh.discourse.group/t/wp7607-issues-with-mangoh-red-board-rev-5/1189/3 "2018-02-21T12:51:57Z")

</div>

where did you get this module from? I am wondering whether it is properly configured or not. BAsed on what you say and what i see, it might not be.  
Can you share the logfile?

---

<div class="post-metadata">

**Author:** ![Souhail](https://avatars.discourse-cdn.com/v4/letter/s/a698b9/32.png) [@Souhail](https://mangoh.discourse.group/u/Souhail)\
**Post date:** [February 21, 2018, 1:06pm UTC](https://mangoh.discourse.group/t/wp7607-issues-with-mangoh-red-board-rev-5/1189/4 "2018-02-21T13:06:29Z")

</div>

[log.txt](https://mangoh.discourse.group/uploads/short-url/ygCg7lpwUkeK6zFG46DCnWDRWRY.txt) (305.2 KB)

Hello Asyal,  
We got the chpis from SierraWireless under the manufacturer P/N : 1103529.  
You will find the log in the attached file. Thank you.