# WiFi on mangoOH Red **URL:** \ **Category:** mangOH Red\ **Created:** [February 11, 2018, 1:32pm UTC](https://mangoh.discourse.group/t/wifi-on-mangooh-red/1154 "2018-02-11T13:32:35Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![Souhail](https://avatars.discourse-cdn.com/v4/letter/s/a698b9/32.png) [@Souhail](https://mangoh.discourse.group/u/Souhail)\ **Post date:** [February 11, 2018, 1:32pm UTC](https://mangoh.discourse.group/t/wifi-on-mangooh-red/1154/1 "2018-02-11T13:32:35Z")
I dispose of the MangOH red board equiped with WP7607 chip. I installed on the IOT0 slot the MIRAGE-PIFA wifi module from Talon. I followed the tutorial to scan the wifi, however each time I got an error ass follows: root@swi-mdm9x28:~# wifi client start ERROR: le\_wifiClient\_Start returns ERROR. root@swi-mdm9x28:~# ifup wlan0 ERR\* failed to write i2c data FTL\* Failed to enable PCA9548A I2C switch root@swi-mdm9x28:~# Thus I could not complete with the wifi scan command. Can you please help me with this issue. ---
**Author:** ![Souhail](https://avatars.discourse-cdn.com/v4/letter/s/a698b9/32.png) [@Souhail](https://mangoh.discourse.group/u/Souhail)\ **Post date:** [February 12, 2018, 9:20am UTC](https://mangoh.discourse.group/t/wifi-on-mangooh-red/1154/2 "2018-02-12T09:20:18Z")
Any help please, this is what I got when I activated the logred : root@swi-mdm9x15:~# wifi client start Feb 12 09:13:00 swi-mdm9x15 user.debug Legato: DBUG | wifiService[797]/framework T=main | LE\_FILENAME ExtractFileDescriptor() 34 | Received fd (11). Feb 12 09:13:00 swi-mdm9x15 user.debug Legato: DBUG | wifiService[797]/framework T=main | LE\_FILENAME ExtractFileDescriptor() 34 | Received fd (12). Feb 12 09:13:00 swi-mdm9x15 user.debug Legato: DBUG | wifiService[797]/daemon T=main | le\_wifiClient.c le\_wifiClient\_Start() 598 | Client starts Feb 12 09:13:00 swi-mdm9x15 [user.info](http://user.info) Legato: INFO | wifiService[797]/daemon T=main | pa\_wifi\_client\_ti.c pa\_wifiClient\_Start() 306 | WiFi client starts Feb 12 09:13:00 swi-mdm9x15 user.debug Legato: DBUG | wifiService[797]/framework T=WifiClientPaThread | LE\_FILENAME PThreadStartRoutine() 362 | Set nice level to 0. Feb 12 09:13:00 swi-mdm9x15 user.debug Legato: DBUG | wifiService[797]/framework T=WifiClientPaThread | LE\_FILENAME le\_mem\_ForceAlloc() 841 | Memory pool ‘framework.DestructorObjs’ overflowed. Expanded to 4 blocks. Feb 12 09:13:00 swi-mdm9x15 [user.info](http://user.info) Legato: INFO | wifiService[797]/daemon T=WifiClientPaThread | pa\_wifi\_client\_ti.c WifiClientPaThreadMain() 211 | Started! Feb 12 09:13:00 swi-mdm9x15 [user.info](http://user.info) Legato: INFO | wifiService[797] | WIFI\_START Feb 12 09:13:00 swi-mdm9x15 [user.info](http://user.info) Legato: INFO | wifiService[797]/daemon T=WifiClientPaThread | pa\_wifi\_client\_ti.c WifiClientPaThreadMain() 228 | PARSING:WIFI\_SET\_EVENT : len:15 Feb 12 09:13:00 swi-mdm9x15 [user.info](http://user.info) kernel: [5871.537035] Loading modules backported from Linux version R8.5 Feb 12 09:13:00 swi-mdm9x15 [user.info](http://user.info) kernel: [5871.541858] Backport generated by backports.git R8.5 Feb 12 09:13:00 swi-mdm9x15 user.err Legato: =ERR= | wifiService[797] | Error: Could not set address to 0x71: Device or resource busy Feb 12 09:13:00 swi-mdm9x15 [user.info](http://user.info) kernel: [5871.720737] cfg80211: Calling CRDA to update world regulatory domain Feb 12 09:13:00 swi-mdm9x15 user.err Legato: =ERR= | wifiService[797] | Error: Could not set address to 0x3e: Device or resource busy Feb 12 09:13:00 swi-mdm9x15 user.err Legato: =ERR= | wifiService[797] | Error: Could not set address to 0x3e: Device or resource busy Feb 12 09:13:01 swi-mdm9x15 user.err Legato: =ERR= | wifiService[797] | Error: Could not set address to 0x3e: Device or resource busy Feb 12 09:13:01 swi-mdm9x15 user.err Legato: =ERR= | wifiService[797] | Error: Could not set address to 0x3e: Device or resource busy Feb 12 09:13:01 swi-mdm9x15 user.err Legato: =ERR= | wifiService[797] | sh: write error: Device or resource busy Feb 12 09:13:01 swi-mdm9x15 [user.info](http://user.info) kernel: [5871.878558] gpio\_sync\_ri: RI owner is Modem Feb 12 09:13:01 swi-mdm9x15 user.debug kernel: [5871.881763] -\>gpio16 = 0 Feb 12 09:13:01 swi-mdm9x15 user.debug kernel: [5871.881763] -\>gpio17 = 0 Feb 12 09:13:01 swi-mdm9x15 user.debug kernel: [5871.881793] -\>gpio18 = 0 Feb 12 09:13:01 swi-mdm9x15 user.debug kernel: [5871.881793] -\>gpio19 = 0 Feb 12 09:13:01 swi-mdm9x15 user.debug kernel: [5871.881824] gpio-59 (IoT slot 0 reset): gpiod\_request: status -16 Feb 12 09:13:01 swi-mdm9x15 user.debug kernel: [5871.881854] export\_store: status -16 Feb 12 09:13:01 swi-mdm9x15 user.err Legato: =ERR= | wifiService[797] | /etc/init.d/tiwifi: Feb 12 09:13:01 swi-mdm9x15 user.err Legato: =ERR= | wifiService[797] | line 125: Feb 12 09:13:01 swi-mdm9x15 user.err Legato: =ERR= | wifiService[797] | can’t create /sys/class/gpio/gpio2/direction: nonexistent directory Feb 12 09:13:01 swi-mdm9x15 user.err Legato: =ERR= | wifiService[797] | Feb 12 09:13:01 swi-mdm9x15 user.err Legato: =ERR= | wifiService[797] | /etc/init.d/tiwifi: Feb 12 09:13:01 swi-mdm9x15 user.err Legato: =ERR= | wifiService[797] | line 125: Feb 12 09:13:01 swi-mdm9x15 user.err Legato: =ERR= | wifiService[797] | can’t create /sys/class/gpio/gpio2/value: nonexistent directory Feb 12 09:13:01 swi-mdm9x15 user.err Legato: =ERR= | wifiService[797] | Feb 12 09:13:01 swi-mdm9x15 [user.info](http://user.info) kernel: [5871.948389] mmc0: mci-version: 18 Feb 12 09:13:01 swi-mdm9x15 [user.info](http://user.info) kernel: [5871.957118] mmc0: bam physical base=0x12182000 Feb 12 09:13:01 swi-mdm9x15 [user.info](http://user.info) kernel: [5871.960536] mmc0: bam virtual base=0xd0d8c000 Feb 12 09:13:01 swi-mdm9x15 [user.info](http://user.info) kernel: [5871.964900] sps:BAM 0x12182000 is registered. Feb 12 09:13:01 swi-mdm9x15 [user.info](http://user.info) kernel: [5871.987547] cfg80211: World regulatory domain updated: Feb 12 09:13:01 swi-mdm9x15 [user.info](http://user.info) kernel: [5871.991850] cfg80211: DFS Master region: unset Feb 12 09:13:01 swi-mdm9x15 [user.info](http://user.info) kernel: [5871.996184] cfg80211: (start\_freq - end\_freq @ bandwidth), (max\_antenna\_gain, max\_eirp), (dfs\_cac\_time) Feb 12 09:13:01 swi-mdm9x15 [user.info](http://user.info) kernel: [5872.006774] mmc0: BAM device registered. bam\_handle=0xcde7da00 Feb 12 09:13:01 swi-mdm9x15 [user.info](http://user.info) kernel: [5872.011963] sps:REVISION of BAM 0xd0d8c000 is 0x5. Feb 12 09:13:01 swi-mdm9x15 [user.info](http://user.info) kernel: [5872.023835] mmc0: Qualcomm MSM SDCC-BAM at 0x0000000012182000 irq 130 Feb 12 09:13:01 swi-mdm9x15 [user.info](http://user.info) kernel: [5872.029787] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) Feb 12 09:13:01 swi-mdm9x15 [user.info](http://user.info) kernel: [5872.037600] mmc0: Qualcomm MSM SDCC-DML at 0x0000000012180800 Feb 12 09:13:01 swi-mdm9x15 user.err kernel: [5872.043063] mmc0: No card detect facilities available Feb 12 09:13:01 swi-mdm9x15 [user.info](http://user.info) kernel: [5872.048435] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) Feb 12 09:13:01 swi-mdm9x15 [user.info](http://user.info) kernel: [5872.056004] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) Feb 12 09:13:01 swi-mdm9x15 [user.info](http://user.info) kernel: [5872.068883] mmc0: Qualcomm MSM SDCC-core at 0x0000000012180000 irq 136,0 dma -1 dmacrcri -1 Feb 12 09:13:01 swi-mdm9x15 [user.info](http://user.info) kernel: [5872.086616] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) Feb 12 09:13:01 swi-mdm9x15 [user.info](http://user.info) kernel: [5872.095741] mmc0: 8 bit data mode disabled Feb 12 09:13:01 swi-mdm9x15 [user.info](http://user.info) kernel: [5872.106698] mmc0: 4 bit data mode enabled Feb 12 09:13:01 swi-mdm9x15 [user.info](http://user.info) kernel: [5872.114786] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) Feb 12 09:13:01 swi-mdm9x15 [user.info](http://user.info) kernel: [5872.141705] mmc0: polling status mode disabled Feb 12 09:13:01 swi-mdm9x15 [user.info](http://user.info) kernel: [5872.155653] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) Feb 12 09:13:01 swi-mdm9x15 [user.info](http://user.info) kernel: [5872.173538] mmc0: MMC clock 400000 -\> 48000000 Hz, PCLK 0 Hz Feb 12 09:13:01 swi-mdm9x15 [user.info](http://user.info) kernel: [5872.183548] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) Feb 12 09:13:01 swi-mdm9x15 [user.info](http://user.info) kernel: [5872.201098] mmc0: Slot eject status = 0 Feb 12 09:13:01 swi-mdm9x15 [user.info](http://user.info) kernel: [5872.224446] mmc0: Power save feature enable = 1 Feb 12 09:13:01 swi-mdm9x15 [user.info](http://user.info) kernel: [5872.228627] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) Feb 12 09:13:01 swi-mdm9x15 [user.info](http://user.info) Legato: INFO | wifiService[797]/daemon T=WifiClientPaThread | pa\_wifi\_client\_ti.c WifiClientPaThreadMain() 228 | PARSING:phy #0: regulatory domain change: set to world roaming by the wireless core upon initialization request : len:104 Feb 12 09:13:01 swi-mdm9x15 [user.info](http://user.info) kernel: [5872.237234] mmc0: SPS-BAM data transfer mode available Feb 12 09:13:06 swi-mdm9x15 [user.info](http://user.info) Legato: INFO | wifiService[797] | Failed to start TI wifi Feb 12 09:13:07 swi-mdm9x15 user.err Legato: =ERR= | wifiService[797] | /etc/init.d/tiwifi: Feb 12 09:13:07 swi-mdm9x15 user.err Legato: =ERR= | wifiService[797] | line 125: Feb 12 09:13:07 swi-mdm9x15 user.err Legato: =ERR= | wifiService[797] | can’t create /sys/class/gpio/gpio2/value: nonexistent directory Feb 12 09:13:07 swi-mdm9x15 user.err Legato: =ERR= | wifiService[797] | Feb 12 09:13:07 swi-mdm9x15 user.err Legato: =ERR= | wifiService[797] | Error: Could not set address to 0x3e: Device or resource busy Feb 12 09:13:07 swi-mdm9x15 [user.info](http://user.info) kernel: [5878.008117] mmc0: mci-version: 18 Feb 12 09:13:07 swi-mdm9x15 [user.info](http://user.info) kernel: [5878.020783] mmc0: bam physical base=0x12182000 Feb 12 09:13:07 swi-mdm9x15 [user.info](http://user.info) kernel: [5878.024232] mmc0: bam virtual base=0xd0f14000 Feb 12 09:13:07 swi-mdm9x15 [user.info](http://user.info) kernel: [5878.036745] sps:BAM 0x12182000 is registered. Feb 12 09:13:07 swi-mdm9x15 [user.info](http://user.info) kernel: [5878.039919] mmc0: BAM device registered. bam\_handle=0xceb3d600\<6\>[5878.046115] sps:REVISION of BAM 0xd0f14000 is 0x5. Feb 12 09:13:07 swi-mdm9x15 [user.info](http://user.info) kernel: [5878.062382] mmc0: Qualcomm MSM SDCC-BAM at 0x0000000012182000 irq 130 Feb 12 09:13:07 swi-mdm9x15 [user.info](http://user.info) kernel: [5878.068395] mmc0: Qualcomm MSM SDCC-DML at 0x0000000012180800 Feb 12 09:13:07 swi-mdm9x15 user.err kernel: [5878.073644] mmc0: No card detect facilities available Feb 12 09:13:07 swi-mdm9x15 [user.info](http://user.info) kernel: [5878.083533] mmc0: Qualcomm MSM SDCC-core at 0x0000000012180000 irq 136,0 dma -1 dmacrcri -1 Feb 12 09:13:07 swi-mdm9x15 [user.info](http://user.info) kernel: [5878.105111] mmc0: 8 bit data mode disabled Feb 12 09:13:07 swi-mdm9x15 [user.info](http://user.info) kernel: [5878.108773] mmc0: 4 bit data mode enabled Feb 12 09:13:07 swi-mdm9x15 [user.info](http://user.info) kernel: [5878.112192] mmc0: polling status mode disabled Feb 12 09:13:07 swi-mdm9x15 [user.info](http://user.info) kernel: [5878.132976] mmc0: MMC clock 400000 -\> 48000000 Hz, PCLK 0 Hz Feb 12 09:13:07 swi-mdm9x15 [user.info](http://user.info) kernel: [5878.149671] mmc0: Slot eject status = 0 Feb 12 09:13:07 swi-mdm9x15 [user.info](http://user.info) kernel: [5878.168441] mmc0: Power save feature enable = 1 Feb 12 09:13:07 swi-mdm9x15 [user.info](http://user.info) kernel: [5878.182572] mmc0: SPS-BAM data transfer mode available Feb 12 09:13:08 swi-mdm9x15 user.err Legato: =ERR= | wifiService[797] | Error: Could not set address to 0x71: Device or resource busy Feb 12 09:13:08 swi-mdm9x15 user.err Legato: =ERR= | wifiService[797] | Error: Could not set address to 0x3e: Device or resource busy Feb 12 09:13:08 swi-mdm9x15 user.err Legato: =ERR= | wifiService[797] | Error: Could not set address to 0x3e: Device or resource busy Feb 12 09:13:08 swi-mdm9x15 user.err Legato: =ERR= | wifiService[797] | Error: Could not set address to 0x3e: Device or resource busy Feb 12 09:13:08 swi-mdm9x15 user.err Legato: =ERR= | wifiService[797] | Error: Could not set address to 0x3e: Device or resource busy Feb 12 09:13:08 swi-mdm9x15 user.err Legato: =ERR= | wifiService[797] | sh: write error: Device or resource busy Feb 12 09:13:08 swi-mdm9x15 user.err Legato: =ERR= | wifiService[797] | /etc/init.d/tiwifi: Feb 12 09:13:08 swi-mdm9x15 user.err Legato: =ERR= | wifiService[797] | line 125: Feb 12 09:13:08 swi-mdm9x15 user.err Legato: =ERR= | wifiService[797] | can’t create /sys/class/gpio/gpio2/direction: nonexistent directory Feb 12 09:13:08 swi-mdm9x15 user.err Legato: =ERR= | wifiService[797] | Feb 12 09:13:08 swi-mdm9x15 user.err Legato: =ERR= | wifiService[797] | /etc/init.d/tiwifi: Feb 12 09:13:08 swi-mdm9x15 user.err Legato: =ERR= | wifiService[797] | line 125: Feb 12 09:13:08 swi-mdm9x15 user.err Legato: =ERR= | wifiService[797] | can’t create /sys/class/gpio/gpio2/value: nonexistent directory Feb 12 09:13:08 swi-mdm9x15 user.err Legato: =ERR= | wifiService[797] | Feb 12 09:13:08 swi-mdm9x15 [user.info](http://user.info) kernel: [5879.409613] gpio\_sync\_ri: RI owner is Modem Feb 12 09:13:08 swi-mdm9x15 user.debug kernel: [5879.412817] -\>gpio16 = 0 Feb 12 09:13:08 swi-mdm9x15 user.debug kernel: [5879.412817] -\>gpio17 = 0 Feb 12 09:13:08 swi-mdm9x15 user.debug kernel: [5879.412848] -\>gpio18 = 0 Feb 12 09:13:08 swi-mdm9x15 user.debug kernel: [5879.412848] -\>gpio19 = 0 Feb 12 09:13:08 swi-mdm9x15 user.debug kernel: [5879.412878] gpio-59 (IoT slot 0 reset): gpiod\_request: status -16 Feb 12 09:13:08 swi-mdm9x15 user.debug kernel: [5879.412909] export\_store: status -16 Feb 12 09:13:08 swi-mdm9x15 [user.info](http://user.info) kernel: [5879.432198] mmc0: mci-version: 18 Feb 12 09:13:08 swi-mdm9x15 [user.info](http://user.info) kernel: [5879.437234] mmc0: bam physical base=0x12182000 Feb 12 09:13:08 swi-mdm9x15 [user.info](http://user.info) kernel: [5879.440652] mmc0: bam virtual base=0xd0f88000 Feb 12 09:13:08 swi-mdm9x15 [user.info](http://user.info) kernel: [5879.444986] sps:BAM 0x12182000 is registered. Feb 12 09:13:08 swi-mdm9x15 [user.info](http://user.info) kernel: [5879.466594] mmc0: BAM device registered. bam\_handle=0xcde7d000\<6\>[5879.471813] sps:REVISION of BAM 0xd0f88000 is 0x5. Feb 12 09:13:08 swi-mdm9x15 [user.info](http://user.info) kernel: [5879.482129] mmc0: Qualcomm MSM SDCC-BAM at 0x0000000012182000 irq 130 Feb 12 09:13:08 swi-mdm9x15 [user.info](http://user.info) kernel: [5879.488233] mmc0: Qualcomm MSM SDCC-DML at 0x0000000012180800 Feb 12 09:13:08 swi-mdm9x15 user.err kernel: [5879.494124] mmc0: No card detect facilities available Feb 12 09:13:08 swi-mdm9x15 [user.info](http://user.info) kernel: [5879.503158] mmc0: Qualcomm MSM SDCC-core at 0x0000000012180000 irq 136,0 dma -1 dmacrcri -1 Feb 12 09:13:08 swi-mdm9x15 [user.info](http://user.info) kernel: [5879.524797] mmc0: 8 bit data mode disabled Feb 12 09:13:08 swi-mdm9x15 [user.info](http://user.info) kernel: [5879.528459] mmc0: 4 bit data mode enabled Feb 12 09:13:08 swi-mdm9x15 [user.info](http://user.info) kernel: [5879.531877] mmc0: polling status mode disabled Feb 12 09:13:08 swi-mdm9x15 [user.info](http://user.info) kernel: [5879.553211] mmc0: MMC clock 400000 -\> 48000000 Hz, PCLK 0 Hz Feb 12 09:13:08 swi-mdm9x15 [user.info](http://user.info) kernel: [5879.572775] mmc0: Slot eject status = 0 Feb 12 09:13:08 swi-mdm9x15 [user.info](http://user.info) kernel: [5879.591575] mmc0: Power save feature enable = 1 Feb 12 09:13:08 swi-mdm9x15 [user.info](http://user.info) kernel: [5879.605584] mmc0: SPS-BAM data transfer mode available Feb 12 09:13:08 swi-mdm9x15 [user.info](http://user.info) kernel: [5879.667052] Loading modules backported from Linux version R8.5 Feb 12 09:13:08 swi-mdm9x15 [user.info](http://user.info) kernel: [5879.671905] Backport generated by backports.git R8.5 Feb 12 09:13:08 swi-mdm9x15 [user.info](http://user.info) kernel: [5879.777536] cfg80211: Calling CRDA to update world regulatory domain Feb 12 09:13:09 swi-mdm9x15 [user.info](http://user.info) kernel: [5879.978177] cfg80211: World regulatory domain updated: Feb 12 09:13:09 swi-mdm9x15 [user.info](http://user.info) kernel: [5879.982328] cfg80211: DFS Master region: unset Feb 12 09:13:09 swi-mdm9x15 [user.info](http://user.info) kernel: [5879.998564] cfg80211: (start\_freq - end\_freq @ bandwidth), (max\_antenna\_gain, max\_eirp), (dfs\_cac\_time) Feb 12 09:13:09 swi-mdm9x15 [user.info](http://user.info) kernel: [5880.046573] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) Feb 12 09:13:09 swi-mdm9x15 [user.info](http://user.info) kernel: [5880.053593] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) Feb 12 09:13:09 swi-mdm9x15 [user.info](http://user.info) kernel: [5880.116587] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) Feb 12 09:13:09 swi-mdm9x15 [user.info](http://user.info) kernel: [5880.123606] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) Feb 12 09:13:09 swi-mdm9x15 [user.info](http://user.info) kernel: [5880.162123] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) Feb 12 09:13:09 swi-mdm9x15 [user.info](http://user.info) kernel: [5880.174056] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) Feb 12 09:13:09 swi-mdm9x15 [user.info](http://user.info) kernel: [5880.182022] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) Feb 12 09:13:09 swi-mdm9x15 [user.info](http://user.info) kernel: [5880.189439] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) Feb 12 09:13:14 swi-mdm9x15 [user.info](http://user.info) Legato: INFO | wifiService[797] | Failed to start TI wifi ERROR: le\_wifiClient\_Start returns ERROR. root@swi-mdm9x15:~# root@swi-mdm9x15:~# Feb 12 09:13:19 swi-mdm9x15 [user.info](http://user.info) Legato: INFO | wifiService[797] | Failed to start TI wifi Feb 12 09:13:19 swi-mdm9x15 user.err Legato: =ERR= | wifiService[797]/daemon T=main | pa\_wifi\_client\_ti.c pa\_wifiClient\_Start() 329 | WiFi Client Command Failed: (23296)wlan0 WIFI\_START Feb 12 09:13:19 swi-mdm9x15 user.err Legato: =ERR= | wifiService[797]/daemon T=main | le\_wifiClient.c le\_wifiClient\_Start() 611 | ERROR: pa\_wifiClient\_Start returns -6 Feb 12 09:13:19 swi-mdm9x15 user.debug Legato: DBUG | wifiService[797]/daemon T=main | le\_wifiClient.c CloseSessionEventHandler() 452 | sessionRef 0xb6f36d94 GetFirstSessionRef (nil) Feb 12 09:13:19 swi-mdm9x15 user.debug Legato: DBUG | wifiService[797]/framework T=main | le\_wifiClient\_server.c CleanupClientData() 139 | Client 0xb6f36d94 is closed !!! Feb 12 09:13:19 swi-mdm9x15 user.debug Legato: DBUG | wifiService[797]/framework T=main | le\_wifiAp\_server.c CleanupClientData() 139 | Client 0xb6f36d04 is closed !!! the legato plateform version used is the last one 18. 01.0. ---
**Author:** ![asyal](https://sea2.discourse-cdn.com/flex016/user_avatar/mangoh.discourse.group/asyal/32/78_2.png) [@asyal](https://mangoh.discourse.group/u/asyal)\ **Post date:** [February 13, 2018, 5:19am UTC](https://mangoh.discourse.group/t/wifi-on-mangooh-red/1154/3 "2018-02-13T05:19:10Z")
Can you see if this forum post helps: > [@All wifi commands failing with Mirage board](http://mangoh.discourse.group/t/all-wifi-commands-failing-with-mirage-board/1059/21): > > @rauger in addition tried the wifi ap commands shown below - although FYI when i set up an AP i usually use the web application. This involves starting the wifiWebAp legato application and then I use a web browser with the url 192.168.2.2:8080. root@swi-mdm9x15:~# wifi ap setssid "RAUGER1" SSID set successfully. root@swi-mdm9x15:~# wifi ap start starting… root@swi-mdm9x15:~# wifi ap setssid "RAUGER1" SSID set successfully. root@swi-mdm9x15:~# wifi ap setchannel 1 Channel set to 1. root… ---
**Author:** ![Souhail](https://avatars.discourse-cdn.com/v4/letter/s/a698b9/32.png) [@Souhail](https://mangoh.discourse.group/u/Souhail)\ **Post date:** [February 21, 2018, 9:10am UTC](https://mangoh.discourse.group/t/wifi-on-mangooh-red/1154/4 "2018-02-21T09:10:15Z")
Thank you that helps, it works fine now.