# WiFi Client Scan & Connect - Error **URL:** \ **Category:** Uncategorized\ **Created:** [November 25, 2016, 3:19pm UTC](https://mangoh.discourse.group/t/wifi-client-scan-connect-error/299 "2016-11-25T15:19:17Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![Kas.Lewis](https://avatars.discourse-cdn.com/v4/letter/k/e9a140/32.png) [@Kas.Lewis](https://mangoh.discourse.group/u/Kas.Lewis)\ **Post date:** [November 25, 2016, 3:19pm UTC](https://mangoh.discourse.group/t/wifi-client-scan-connect-error/299/1 "2016-11-25T15:19:17Z")
I am attempting to connect to a WiFi access point but I have been having issues. The first time I was able to set the security and the passphrase but could not connect. I would consistently get an error or -6. root@swi-mdm9x15:~# wifi client connect 0x10000001 ERROR: le\_wifiClient\_Connect returns error code -6 root@swi-mdm9x15:~# I moved to another access point as I thought the issue might be the passphrase had spaces in it. With the spaces I was not sure how to set up teh pass phrase, do you need quotes or not and will it eve work if there are spaces. I tried with and without quotes but still got the -6 error. When attempting on the second access point all I got when attempting a scan was: root@swi-mdm9x15:~# wifi client scan starting scan DEBUG: le\_wifiClient\_GetFirstAccessPoint ERRORroot@swi-mdm9x15:~# If there are any suggestions as to what I may have changed or done incorrectly I would appreciate the help. Thankfully Kas ![](https://us1.discourse-cdn.com/flex016/uploads/mangoh/original/1X/02ed89f04b3c2e59a6aeb2242fb937f991c9e85e.png) ---
**Author:** ![asyal](https://sea2.discourse-cdn.com/flex016/user_avatar/mangoh.discourse.group/asyal/32/78_2.png) [@asyal](https://mangoh.discourse.group/u/asyal)\ **Post date:** [November 26, 2016, 1:13am UTC](https://mangoh.discourse.group/t/wifi-client-scan-connect-error/299/2 "2016-11-26T01:13:24Z")
Hi Kas, I tried the same commands and didnt run into any issues. Could you show your logread -f traces? regards, ashish ---
**Author:** ![Kas.Lewis](https://avatars.discourse-cdn.com/v4/letter/k/e9a140/32.png) [@Kas.Lewis](https://mangoh.discourse.group/u/Kas.Lewis)\ **Post date:** [November 28, 2016, 8:27pm UTC](https://mangoh.discourse.group/t/wifi-client-scan-connect-error/299/3 "2016-11-28T20:27:12Z")
Hello @asyal, I have attached my logread -f file and changed my password for security reasons but the overall form remains the same (The XXXXXX YYYYYY 123 PPPP). I hope this provides the information needed. Thanks Kas Ps. where would I be able to find what the error codes mean. [logread\_-f.txt](https://mangoh.discourse.group/uploads/short-url/szzbeGSpjbTfNonwZGGzAY1ARPK.txt) (31.4 KB) ---
**Author:** ![Kas.Lewis](https://avatars.discourse-cdn.com/v4/letter/k/e9a140/32.png) [@Kas.Lewis](https://mangoh.discourse.group/u/Kas.Lewis)\ **Post date:** [November 29, 2016, 10:54pm UTC](https://mangoh.discourse.group/t/wifi-client-scan-connect-error/299/4 "2016-11-29T22:54:34Z")
Hello @asyal, Is there any further information regarding how I could resolve this issue or what the error means. Thanks Kas ---
**Author:** ![asyal](https://sea2.discourse-cdn.com/flex016/user_avatar/mangoh.discourse.group/asyal/32/78_2.png) [@asyal](https://mangoh.discourse.group/u/asyal)\ **Post date:** [December 10, 2016, 12:22am UTC](https://mangoh.discourse.group/t/wifi-client-scan-connect-error/299/5 "2016-12-10T00:22:06Z")
Hi Kas, @Kas.Lewis I finally got some time to try this out. The issue you saw might be due to the firmware version you might have on the module. I was getting the same error as you but then I downloaded the latest firmware from: [http://source.sierrawireless.com/resources/legato/wpfirmwarerelease/](http://source.sierrawireless.com/resources/legato/wpfirmwarerelease/) The commands worked as what was written in the doc on the network (note I changed the password I used) wifi client start wifi client scan wifi client setsecurityproto 0x10000001 3 wifi client setpassphrase 0x10000001 password wifi client connect 0x10000001 cheers, Ashish ---
**Author:** ![Kas.Lewis](https://avatars.discourse-cdn.com/v4/letter/k/e9a140/32.png) [@Kas.Lewis](https://mangoh.discourse.group/u/Kas.Lewis)\ **Post date:** [December 11, 2016, 4:39am UTC](https://mangoh.discourse.group/t/wifi-client-scan-connect-error/299/6 "2016-12-11T04:39:32Z")
Hello @asyal, Thank you for the response. I have updated my firmware to the most recent but I am still having issues. I have only tried it at one location. I will attempt a different router and internet provider tomorrow. The error is below in the screenshot. ![](https://us1.discourse-cdn.com/flex016/uploads/mangoh/original/1X/0fbb1e274d6d666c4af56f3af7d0391dd1593a70.png) I will update as to m findings tomorrow but if you have any information as to what may be causing the current issue that would be great. Thankfully Kas ---
**Author:** ![asyal](https://sea2.discourse-cdn.com/flex016/user_avatar/mangoh.discourse.group/asyal/32/78_2.png) [@asyal](https://mangoh.discourse.group/u/asyal)\ **Post date:** [December 11, 2016, 7:00am UTC](https://mangoh.discourse.group/t/wifi-client-scan-connect-error/299/7 "2016-12-11T07:00:11Z")
why does your legato version showed modified? Here is what i see when i redownload the firmware: root@swi-mdm9x15:~# cm info Device: WP8548 IMEI: 359377060016051 FSN: LL604200070705 Firmware: SWI9X15Y\_07.11.11.00 r33161 CARMD-EV-FRMWR1 2016/09/20 16:36:44 Bootloader: SWI9X15Y\_07.11.11.00 r33161 CARMD-EV-FRMWR1 2016/09/20 16:36:44 root@swi-mdm9x15:~# legato version 16.07.0\_5aabbe8a5c30c0b16469b0ea885a82f6 root@swi-mdm9x15:~# wifi client start successfully called start root@swi-mdm9x15:~# wifi client scan No issues after this… ---
**Author:** ![Kas.Lewis](https://avatars.discourse-cdn.com/v4/letter/k/e9a140/32.png) [@Kas.Lewis](https://mangoh.discourse.group/u/Kas.Lewis)\ **Post date:** [December 12, 2016, 5:12am UTC](https://mangoh.discourse.group/t/wifi-client-scan-connect-error/299/8 "2016-12-12T05:12:40Z")
Hello @asyal, The only modifications made were those listed in the blog I wrote on setting up the Legato environment. There should be nothing else. I did a repo sync as well to be sure everything was up to date and then rebuilt Legato before installing it again on the mangOH board after doing a fresh firmware update. Is there away to ensure a fresh Legato framework is installed with out creating a fresh new VM. Thanks Kas ---
**Author:** ![asyal](https://sea2.discourse-cdn.com/flex016/user_avatar/mangoh.discourse.group/asyal/32/78_2.png) [@asyal](https://mangoh.discourse.group/u/asyal)\ **Post date:** [December 12, 2016, 5:25am UTC](https://mangoh.discourse.group/t/wifi-client-scan-connect-error/299/9 "2016-12-12T05:25:11Z")
can you do a firmware install only? Dont use the VM to download the mangoh/legato apps. Basically, do firmware install for WP module from source [http://source.sierrawireless.com/resources/legato/wpfirmwarerelease/](http://source.sierrawireless.com/resources/legato/wpfirmwarerelease/) Dont install any app from the VM and run the commands above. ---
**Author:** ![Kas.Lewis](https://avatars.discourse-cdn.com/v4/letter/k/e9a140/32.png) [@Kas.Lewis](https://mangoh.discourse.group/u/Kas.Lewis)\ **Post date:** [December 13, 2016, 4:14am UTC](https://mangoh.discourse.group/t/wifi-client-scan-connect-error/299/10 "2016-12-13T04:14:01Z")
Without running cd mangOH/legato make wp85 instlegato wp85 192.168.2.2 I can not ssh into the mangoh board. I just get a connection timed out error. Kas ---
**Author:** ![Kas.Lewis](https://avatars.discourse-cdn.com/v4/letter/k/e9a140/32.png) [@Kas.Lewis](https://mangoh.discourse.group/u/Kas.Lewis)\ **Post date:** [December 13, 2016, 5:00am UTC](https://mangoh.discourse.group/t/wifi-client-scan-connect-error/299/11 "2016-12-13T05:00:14Z")
After reinstalling legato on the mangOH board it appears as though I can not SSH into teh board at all. Kas ---
**Author:** ![asyal](https://sea2.discourse-cdn.com/flex016/user_avatar/mangoh.discourse.group/asyal/32/78_2.png) [@asyal](https://mangoh.discourse.group/u/asyal)\ **Post date:** [December 13, 2016, 5:51am UTC](https://mangoh.discourse.group/t/wifi-client-scan-connect-error/299/12 "2016-12-13T05:51:38Z")
> [@Kas.Lewis](#): > > After reinstalling legato on the mangOH board it appears as though I can not SSH into teh board at all. why did you have re-install legato? Just redownload the firmware from the source site I sent to you. What do you see? ---
**Author:** ![Kas.Lewis](https://avatars.discourse-cdn.com/v4/letter/k/e9a140/32.png) [@Kas.Lewis](https://mangoh.discourse.group/u/Kas.Lewis)\ **Post date:** [December 13, 2016, 6:01am UTC](https://mangoh.discourse.group/t/wifi-client-scan-connect-error/299/13 "2016-12-13T06:01:37Z")
I tried that and I could not SSH into the mangOH board. I then attempted to run the instlegato command but that to says “Device address 192.168.2.2 seems to be unreachable”. I have also attempted to ping the mangOH board, this to gives 100% packet loss, “Destination host unreachable”. I can not get access to the board for some reason. I have attempted to reseat the module, power cycled teh board numerous times. Nothing is showing signs of working. Kas ---
**Author:** ![asyal](https://sea2.discourse-cdn.com/flex016/user_avatar/mangoh.discourse.group/asyal/32/78_2.png) [@asyal](https://mangoh.discourse.group/u/asyal)\ **Post date:** [December 13, 2016, 6:05am UTC](https://mangoh.discourse.group/t/wifi-client-scan-connect-error/299/14 "2016-12-13T06:05:09Z")
Can you pull pin 7 on SW401 up and try to redowload the firmware? If this doesnt work, you might need to use fwupdate tool in linux. ---
**Author:** ![Kas.Lewis](https://avatars.discourse-cdn.com/v4/letter/k/e9a140/32.png) [@Kas.Lewis](https://mangoh.discourse.group/u/Kas.Lewis)\ **Post date:** [December 13, 2016, 6:29am UTC](https://mangoh.discourse.group/t/wifi-client-scan-connect-error/299/15 "2016-12-13T06:29:36Z")
I have attempted to flash the firmware with SW 7 in the on position and then power cycle the board. Both before and after cycling the board I was unable to ping the board. I also moved SW back to off and I still cannot ping the board. Any access via 192.168.2.2 does not appear to work. Kas ---
**Author:** ![Kas.Lewis](https://avatars.discourse-cdn.com/v4/letter/k/e9a140/32.png) [@Kas.Lewis](https://mangoh.discourse.group/u/Kas.Lewis)\ **Post date:** [December 14, 2016, 5:16am UTC](https://mangoh.discourse.group/t/wifi-client-scan-connect-error/299/16 "2016-12-14T05:16:24Z")
Is there anything else to try at this point or is the board somehow bricked/dead ? The board has been either on the same table the whole time or in the anti-static bag it comes in. Any information on how to possibly proceed with this board would be helpful. Thanks Kas ![](https://us1.discourse-cdn.com/flex016/uploads/mangoh/original/1X/55f0e15924e3be982b3b5ec4fc8a29b17adaa184.png) Still cant connect to the board via SSH even with a successful firmware update ☹ ---
**Author:** ![asyal](https://sea2.discourse-cdn.com/flex016/user_avatar/mangoh.discourse.group/asyal/32/78_2.png) [@asyal](https://mangoh.discourse.group/u/asyal)\ **Post date:** [December 14, 2016, 6:19am UTC](https://mangoh.discourse.group/t/wifi-client-scan-connect-error/299/17 "2016-12-14T06:19:46Z")
I have asked internally…There is a way to not have this error if you use a linux machine. Need to check on windows. will get back to you ---
**Author:** ![Raf](https://avatars.discourse-cdn.com/v4/letter/r/848f3c/32.png) [@Raf](https://mangoh.discourse.group/u/Raf)\ **Post date:** [December 14, 2016, 6:26am UTC](https://mangoh.discourse.group/t/wifi-client-scan-connect-error/299/18 "2016-12-14T06:26:09Z")
Hi Kas, Have you tried connecting to the RS232 Console Port (UART 2) on mangOH? This way you can monitor the the Linux/Legato boot process - you might get some clues as to what’s happening from here. I once had an issue where I couldn’t SSH into the modem after incorrectly editing a file on the WP8548 which prevented it from starting a few important services, including SSH. As a result, I couldn’t SSH into it nor did I know what was going on until I monitored the boot process on the Console port. I was able to log in via the Console port, edit the file (correctly this time) then reboot to restore it. Just a thought. Cheers, Raf ---
**Author:** ![asyal](https://sea2.discourse-cdn.com/flex016/user_avatar/mangoh.discourse.group/asyal/32/78_2.png) [@asyal](https://mangoh.discourse.group/u/asyal)\ **Post date:** [December 14, 2016, 4:08pm UTC](https://mangoh.discourse.group/t/wifi-client-scan-connect-error/299/19 "2016-12-14T16:08:58Z")
Hi Kas, As suggested by Raf, could you share the kernel log message on the RS232 port? This will give us an idea what went wrong with your unit. regards, Ashish ---
**Author:** ![Kas.Lewis](https://avatars.discourse-cdn.com/v4/letter/k/e9a140/32.png) [@Kas.Lewis](https://mangoh.discourse.group/u/Kas.Lewis)\ **Post date:** [December 16, 2016, 4:26am UTC](https://mangoh.discourse.group/t/wifi-client-scan-connect-error/299/20 "2016-12-16T04:26:22Z")
1 (ARMv7), cr=10c5387d [0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instructio n cache [0.000000] Machine model: QCT MSM9615 CDP [0.000000] memory pool 3 (start 4ff00000 size 100000) initialized [0.000000] Memory policy: Data cache writeback [0.000000] L310 cache controller enabled [0.000000] l2x0: 8 ways, CACHE\_ID 0x410000c8, AUX\_CTRL 0x00540000, Cache siz e: 262144 B [0.000000] socinfo\_init: v7, id=106, ver=3.0, raw\_id=1760, raw\_ver=1760, hw\_ plat=0, hw\_plat\_ver=65536 [0.000000] accessory\_chip=0, hw\_plat\_subtype=0, pmic\_model=19, pmic\_die\_rev ision=3 [0.000000] CPU: All CPU(s) started in SVC mode. [0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag es: 40720 [0.000000] Kernel command line: console=ttyHSL0,115200 console=ttyHSL1,1152 00 fudge\_ro\_rootfs=true rootfs\_ro=true mtdparts=msm\_nand:0x00100000@0x051c0000(b ootloader),0x01400000(kernel),0x03140000(rootfs),0x02780000(user0),0x08b80000(us er1),0x00500000(user2),0x00200000(user3) androidboot.serialno=MDM9615 lkversion= 1.3.0\_a50272dbb2 androidboot.baseband=msm [0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [0.000000] allocated 507904 bytes of page\_cgroup [0.000000] please try ‘cgroup\_disable=memory’ option if you don’t want memor y cgroups [0.000000] Memory: 150472K/164864K available (6762K kernel code, 631K rwdata , 2256K rodata, 1366K init, 1265K bss, 14392K reserved, 0K highmem) [0.000000] Virtual kernel memory layout: [0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [0.000000] vmalloc : 0xd0000000 - 0xff000000 ( 752 MB) [0.000000] lowmem : 0xc0000000 - 0xcf800000 ( 248 MB) [0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [0.000000] .text : 0xc0008000 - 0xc08d69e0 (9019 kB) [0.000000] .init : 0xc08d7000 - 0xc0a2cb6c (1367 kB) [0.000000] .data : 0xc0a2e000 - 0xc0acbf7c ( 632 kB) [0.000000] .bss : 0xc0acbf7c - 0xc0c084bc (1266 kB) [0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [0.000000] Preemptible hierarchical RCU implementation. [0.000000] NR\_IRQS:681 [0.000030] sched\_clock: 32 bits at 32kHz, resolution 30520ns, wraps every 65 542000541696ns [0.000610] Console: colour dummy device 80x30 [0.000701] Calibrating delay loop… 366.18 BogoMIPS (lpj=1830912) [0.060491] pid\_max: default: 32768 minimum: 301 [0.060949] Security Framework initialized [0.061040] Smack: Initializing. [0.061468] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [0.061498] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [0.063268] Initializing cgroup subsys debug [0.063299] Initializing cgroup subsys memory [0.063360] Initializing cgroup subsys devices [0.063390] Initializing cgroup subsys freezer [0.063390] Initializing cgroup subsys net\_cls [0.063421] Initializing cgroup subsys blkio [0.063482] CPU: Testing write buffer coherency: ok [0.063604] ftrace: allocating 22813 entries in 67 pages [0.145429] Setting up static identity map for 0x40e1e180 - 0x40e1e1d8 [0.169327] devtmpfs: initialized [0.178818] VFP support v0.3: implementor 41 architecture 2 part 30 variant 5 rev 1 [0.181474] regulator-dummy: no parameters [0.182054] NET: Registered protocol family 16 [0.183244] DMA: preallocated 256 KiB pool for atomic coherent allocations [0.183488] AXI: msm\_bus\_fabric\_init\_driver(): msm\_bus\_fabric\_init\_driver [0.185045] msm\_serial\_hsl\_init: driver initialized [0.185808] cpuidle: using governor ladder [0.185838] cpuidle: using governor menu [0.186571] msm\_rpm\_init: RPM firmware 3.0.16842958 [0.186815] gpio\_cf3\_low\_power\_reset\_toggle: Setting up LowPower\_RESET pin to ggle timer [0.186845] unmatched machine ID in register\_i2c\_devices [0.186876] wl18xx board initialization done [0.187395] 8018\_s1: 500 \<–\> 1150 mV at 1150 mV normal idle [0.187822] 8018\_s2: 1225 \<–\> 1300 mV at 1300 mV normal idle [0.188707] 8018\_s3: 1800 mV normal idle [0.189226] 8018\_s4: 2100 \<–\> 2200 mV at 2200 mV normal idle [0.190050] 8018\_s5: 1350 mV normal idle [0.190965] 8018\_l2: 1800 mV normal idle [0.191851] 8018\_l3: 1800 mV normal idle [0.192278] 8018\_l4: 3300 mV normal idle [0.192675] 8018\_l5: 2850 mV normal idle [0.193041] 8018\_l6: 1800 \<–\> 2850 mV at 2850 mV normal idle [0.193468] 8018\_l7: 1850 \<–\> 1900 mV at 1900 mV normal idle [0.193560] 8018\_l7: supplied by 8018\_s4 [0.193926] 8018\_l8: 1200 mV normal idle [0.194048] 8018\_l8: supplied by 8018\_s3 [0.194414] 8018\_l9: 750 \<–\> 1150 mV at 1150 mV normal idle [0.194506] 8018\_l9: supplied by 8018\_s5 [0.194903] 8018\_l10: 1050 mV normal idle [0.194994] 8018\_l10: supplied by 8018\_s5 [0.195452] 8018\_l11: 1050 mV normal idle [0.195544] 8018\_l11: supplied by 8018\_s5 [0.195971] 8018\_l12: 1050 mV normal idle [0.196062] 8018\_l12: supplied by 8018\_s5 [0.196490] 8018\_l13: 1850 \<–\> 2950 mV at 2950 mV normal idle [0.196886] 8018\_l14: 2850 mV normal idle [0.197253] 8018\_lvs1: no parameters [0.197344] 8018\_lvs1: supplied by 8018\_s3 [0.197741] vdd\_dig\_corner: 0 \<–\> 0 mV at 0 mV [0.205005] ext\_2p95v: no parameters [0.205249] gpio\_vreg\_probe: id=18, name=ext\_2p95v, gpio=18, gpio\_label=ext\_2 p95\_en [0.205768] pm8018\_probe: PMIC revision 1: F3 [0.205798] pm8018\_probe: PMIC revision 2: 08 [0.205829] pm8018\_probe: PMIC version: PM8018 rev 2.1 [0.205829] pm8018\_probe: PMIC Restart Reason: Triggered from KPD (power key press) [0.207324] pm\_gpio\_probe: OK: base=88, ngpio=6 [0.207874] pm8xxx\_mpp\_probe: OK: base=94, ngpio=6 [0.209980] msm\_serial\_hsl\_probe: ttyHSL0 is disabled. [0.210041] msm\_serial\_hsl: probe of msm\_serial\_hsl.0 failed with error -1 [0.210499] msm\_serial\_hsl\_probe: ttyHSL1 is reserved for CONSOLE service. [0.210499] msm\_serial\_hsl\_probe: detected port #1 (ttyHSL1) [0.210773] msm\_serial\_hsl.1: ttyHSL1 at MMIO 0x16440000 (irq = 186, base\_bau d = 460800) is a MSM [0.210895] msm\_hsl\_console\_setup: console setup on port #1 [0.315122] gpio\_cf3\_low\_power\_reset\_timer\_callback: LowPower\_RESET pin toggl ed high [0.315153] gpio\_cf3\_low\_power\_reset\_timer\_callback: LowPower\_RESET pin toggl e timer deleted [0.840805] console [ttyHSL1] enabled [0.856218] cpufreq\_table\_init: CPU: 4 scaling frequencies supported. [0.862200] hw-breakpoint: Debug register access (0xee003e17) caused undefine d instruction on CPU 0 [0.870654] hw-breakpoint: CPU 0 failed to disable vector catch [0.877216] socinfo\_init\_dev: device\_register fail (-22) [0.884480] sps:REVISION of BAM 0xd0060000 is 0x5. [0.888448] sps:BAM 0x12244000 is registered. [0.892781] sps:sps is ready.[1.187273] NET: Registered protocol family 2 [1.192614] TCP established hash table entries: 2048 (order: 1, 8192 bytes) [1.198596] TCP bind hash table entries: 2048 (order: 1, 8192 bytes) [1.205005] TCP: Hash tables configured (established 2048 bind 2048) [1.211353] TCP: reno registered [1.214466] UDP hash table entries: 256 (order: 0, 4096 bytes) [1.220326] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) vice ac [2.020204] Setting mtd-\>writebufsize to 0x800 [2.024629] Found a supported NAND device [2.028567] NAND Controller ID : 0x4030 [2.032443] NAND Device ID : 0x1590ac2c [2.036288] Buswidth : 8 Bits [2.039249] Density : 512 MByte [2.042484] Pagesize : 2048 Bytes [2.045780] Erasesize: 131072 Bytes [2.049229] Oobsize : 64 Bytes [2.052372] CFG0 Init : 0xa8d408c0 [2.055821] CFG1 Init : 0x0004745c [2.059301] ECCBUFCFG : 0x00000203 [2.062810] CW size : 528 bytes [2.066168] BCH ECC : disabled [2.069525] 7 cmdlinepart partitions found on MTD device msm\_nand [2.075568] Creating 7 MTD partitions on “msm\_nand”: [2.080512] 0x0000051c0000-0x0000052c0000 : “bootloader” [2.088936] 0x0000052c0000-0x0000066c0000 : “kernel” [2.110361] 0x0000066c0000-0x000009800000 : "rootfs" registered new interface driver dm9601 [2.382206] usbcore: registered new interface driver smsc75xx [2.387883] usbcore: registered new interface driver smsc95xx [2.393590] usbcore: registered new interface driver net1080 [2.399206] usbcore: registered new interface driver cdc\_subset [2.405127] usbcore: registered new interface driver zaurus [2.410743] usbcore: registered new interface driver MOSCHIP usb-ethernet dri ver [2.418068] usbcore: registered new interface driver int51x1 [2.423775] usbcore: registered new interface driver cdc\_ncm [2.429238] ehci\_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver [2.449656] msm\_hsusb\_host msm\_hsusb\_host: unable to find transceiver [2.468426] platform msm\_hsusb\_host: Driver msm\_hsusb\_host requests probe def erral [2.488295] msm\_hsic\_host msm\_hsic\_host: Qualcomm EHCI Host Controller using HSIC [2.494948] msm\_hsic\_host msm\_hsic\_host: new USB bus registered, assigned bus number 1 [2.529986] msm\_hsic\_host msm\_hsic\_host: irq 264, io mem 0x12540000 [2.549916] msm\_hsic\_host msm\_hsic\_host: USB 2.0 started, EHCI 1.00 [2.557515] hub 1-0:1.0: USB hub found [2.560445] hub 1-0:1.0: 1 port detected [2.566183] usbcore: registered new interface driver cdc\_acm [2.570944] cdc\_acm: USB Abstract Control Model driver for USB modems and ISD N adapters [2.579124] usbcore: registered new interface driver usbserial [2.584831] usbcore: registered new interface driver ftdi\_sio [2.590477] usbserial: USB Serial support registered for FTDI USB Serial Devi ce [2.597894] usbcore: registered new interface driver option [2.603326] usbserial: USB Serial support registered for GSM modem (1-port) [2.610437] usbcore: registered new interface driver qcserial [2.615992] usbserial: USB Serial support registered for Qualcomm USB modem [2.622981] usbcore: registered new interface driver sierra [2.628444] usbserial: USB Serial support registered for Sierra USB modem [2.635281] usbcore: registered new interface driver GobiSerial [2.641171] usbserial: USB Serial support registered for GobiSerial [2.647428] usbcore: registered new interface driver usb\_ehset\_test [2.653685] msm\_otg msm\_otg: msm\_otg probe [2.657652] msm\_otg msm\_otg: failed to get phy\_clk [2.662810] msm\_otg msm\_otg: OTG regs = d006e000 [2.669800] misc usb\_link: registered misc device minor 47 [2.678406] mbim\_init: initialize 1 instances [2.682252] mbim\_init: Initialized 1 ports [2.691377] rndis\_qc\_init: initialize rndis QC instance [2.697054] android\_usb gadget: android\_usb ready [2.702273] input: pmic8xxx\_pwrkey as /devices/platform/msm\_ssbi.0/pm8018-cor e/pm8xxx-pwrkey/input/input0 [2.713383] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx\_rtc as rtc0 [2.719578] i2c /dev entries driver [2.724309] pm8xxx-adc supply pa\_therm not found, using dummy regulator [2.730444] swimcu\_hwmon\_probe: start [2.733862] swimcu\_hwmon\_probe: success num 2 [2.762368] pm8xxx\_tm\_probe: OK [2.765298] usbcore: registered new interface driver usbhid [2.770120] usbhid: USB HID core driver [2.775339] usbcore: registered new interface driver snd-usb-audio [2.782664] voice\_allocate\_shared\_memory: ION memory allocation failed [2.788585] msm\_pcm\_probe: dev name msm-voip-dsp [2.793407] msm\_pcm\_probe: dev name msm-host-pcm-voice [2.799175] msm\_pcm\_probe: dev name msm-pcm-dsp [2.803021] msm\_pcm\_probe: dev name msm-multi-ch-pcm-dsp [2.809613] mdm9615\_audio\_init(): Interface Type (wm8944) = 1 [2.815931] mdm9615\_audio\_init - AR8, AR755xRD and CF3 configuration [2.821669] soc-audio soc-audio.0: ASoC: machine mdm9615-wm8944-snd-card shou ld use snd\_soc\_register\_card() [2.850541] soc-audio soc-audio.0: snd-soc-dummy-dai \<-\> MultiMedia1 mapping ok [2.857286] soc-audio soc-audio.0: snd-soc-dummy-dai \<-\> MultiMedia2 mapping ok [2.864581] soc-audio soc-audio.0: snd-soc-dummy-dai \<-\> CS-VOICE mapping ok [2.871814] soc-audio soc-audio.0: snd-soc-dummy-dai \<-\> VoIP mapping ok [2.878132] soc-audio soc-audio.0: msm-stub-rx \<-\> msm-dai-q6.241 mapping ok [2.885243] soc-audio soc-audio.0: msm-stub-tx \<-\> msm-dai-q6.240 mapping ok [2.892354] soc-audio soc-audio.0: snd-soc-dummy-dai \<-\> SLIMBUS0\_HOSTLESS ma pping ok [2.900137] soc-audio soc-audio.0: snd-soc-dummy-dai \<-\> AUXPCM\_HOSTLESS mapp ing ok [2.907767] soc-audio soc-audio.0: snd-soc-dummy-dai \<-\> VoLTE mapping ok [2.914603] soc-audio soc-audio.0: snd-soc-dummy-dai \<-\> DTMF\_RX\_HOSTLESS map ping ok [2.922173] soc-audio soc-audio.0: msm-stub-tx \<-\> msm-dai-stub mapping ok [2.929009] soc-audio soc-audio.0: msm-stub-tx \<-\> msm-dai-stub mapping ok [2.935785] usb 1-1: new high-speed USB device number 2 using msm\_hsic\_host [2.942896] soc-audio soc-audio.0: msm-stub-rx \<-\> msm-dai-stub mapping ok [2.949671] soc-audio soc-audio.0: msm-stub-tx \<-\> msm-dai-stub mapping ok [2.956844] soc-audio soc-audio.0: msm-stub-rx \<-\> msm-dai-stub mapping ok [2.963375] soc-audio soc-audio.0: msm-stub-rx \<-\> msm-dai-q6.224 mapping ok [2.970364] soc-audio soc-audio.0: msm-stub-tx \<-\> msm-dai-q6.225 mapping ok [2.977353] soc-audio soc-audio.0: msm-stub-rx \<-\> msm-dai-q6.32773 mapping o k [2.984800] soc-audio soc-audio.0: msm-stub-tx \<-\> msm-dai-q6.32772 mapping o k [2.992064] soc-audio soc-audio.0: msm-stub-tx \<-\> msm-dai-q6.32771 mapping o k [3.000457] hub 1-1:1.0: USB hub found [3.003418] soc-audio soc-audio.0: msm-stub-rx \<-\> msm-dai-q6.2 mapping ok [3.010102] hub 1-1:1.0: 3 ports detected [3.014771] soc-audio soc-audio.0: msm-stub-tx \<-\> msm-dai-q6.3 mapping ok [3.023805] soc-audio soc-audio.0: wm8944-hifi \<-\> msm-dai-q6.0 mapping ok [3.029879] soc-audio soc-audio.0: wm8944-hifi \<-\> msm-dai-q6.1 mapping ok [3.052067] TCP: cubic registered [3.054417] NET: Registered protocol family 17 [3.059484] Registering SWP/SWPB emulation handler [3.070715] clock\_late\_init() disabled 39 unused clocks [3.077430] sps:BAM 0x124c2000 is registered. [3.086525] no pmic restart interrupt specified [3.090401] MSM Watchdog Initialized [3.097329] ext\_2p95v: disabling [3.099649] regulator-dummy: disabling [3.117259] msm\_otg msm\_otg: phy\_reset: success [3.121959] rtc-pm8xxx rtc-pm8xxx: setting system clock to 1970-01-01 00:02:0 9 UTC (129) [3.133557] ### dt-test ### No testcase data in device tree; not running test s [3.146253] ALSA device list: [3.150373] #0: mdm9615-wm8944-snd-card [3.165359] Freeing unused kernel memory: 1364K (c08d7000 - c0a2c000) [3.710178] usb 1-1.3: new high-speed USB device number 4 using msm\_hsic\_host [3.742347] hub 1-1.3:1.0: USB hub found [3.745643] hub 1-1.3:1.0: 5 ports detected [3.753090] ubi0: scanning is finished [3.764504] ubi0 warning: print\_rsvd\_warning: cannot reserve enough PEBs for bad PEB handling, reserved 58, need 80 [3.776072] ubi0: attached mtd2 (name “rootfs”, size 49 MiB) [3.780772] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [3.787578] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [3.794353] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 [3.801281] ubi0: good PEBs: 394, bad PEBs: 0, corrupted PEBs: 0 [3.807263] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 12 8 [3.814497] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequ ence number: 2264427 [3.823409] ubi0: available PEBs: 0, total reserved PEBs: 394, PEBs reserved for bad PEB handling: 58 [3.832565] ubi0: background thread “ubi\_bgt0d” started, PID 77 UBI device number 0, total 394 LEBs (50028544 bytes, 47.7 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB) [3.871204] block ubiblock0\_0: created from ubi0:0(rootfs) rootfs: dev ‘/dev/ubiblock0\_0’ 'squashfs’ S02mount\_early: Executing mount\_early\_user\_start… S02mount\_early: Trying to mount UBIFS on /mnt/flash using [usrquota,grpquota,rw] mount options… [6.595879] ubi2: scanning is finished [6.598718] ubi2 error: ubi\_read\_volume\_table: the layout volume was not foun d [6.606683] ubi2 error: ubi\_attach\_mtd\_dev: failed to attach mtd4, error -22 ubiattach: error!: cannot attach mtd4 error 22 (Invalid argument) S02mount\_early: Unable to attach mtd partition user1 to UBI logical device 2 S02mount\_early: Trying to mount UBIFS on /mnt/flash using [rw] mount options… SSS▒▒S▒▒▒2 error: ubi\_attach\_mtd\_dev: failed to attach mtd4, error -22 ubiattach: error!: cannot attach mtd4 error 22 (Invalid argument) PuTTYS02mount\_early: Unable to attach mtd partition user1 to UBI logical device 2 [8.028597] ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [8.039737] ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096 [8.045811] ubi1: good PEBs: 316, bad PEBs: 0, corrupted PEBs: 0 [8.051915] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 12 8 [8.058873] ubi1: max/mean erase counter: 1/0, WL threshold: 4096, image sequ ence number: 292670867 [8.067968] ubi1: available PEBs: 0, total reserved PEBs: 316, PEBs reserved for bad PEB handling: 80 [8.077155] ubi1: background thread “ubi\_bgt1d” started, PID 178 UBI device number 1, total 316 LEBs (40124416 bytes, 38.3 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB) [8.121562] block ubiblock1\_0: created from ubi1:0(legato) sd\_mod [8.961330] usbcore: registered new interface driver usb-storage msm\_sdcc ▒▒▒: RmNet(1) dual Speed, IN:ep10in OUT:ep7out [10.066564] apr\_tal: SMD\_EVENT\_OPEN [10.069403] Match for Function Name: audio, Int #16 [10.074042] Match for Function Name: audio, Int #17 [10.078773] Match for Function Name: audio, Int #18 [10.083931] ecm\_native\_function\_bind\_config: ecm\_native\_function\_bind\_config MAC: 00:00:00:00:00:00 [10.092904] android\_usb gadget: using random self ethernet address [10.110849] usb0: MAC 2e:50:5b:e9:8a:20 [10.113688] usb0: HOST MAC 9a:93:aa:54:b1:12 [10.117961] Match for Function Name: cdc\_ethernet, Int #19 [10.150038] Match for Function Name: cdc\_ethernet, Int #20 [10.157637] msm\_otg msm\_otg: Avail curr from USB = 2 [10.161635] ci\_hdrc ci\_hdrc.0: CI\_HDRC\_CONTROLLER\_SUSPEND\_EVENT received Starting syslogd/klogd: Starting diagrebootapp: [11.274500] nmea: smd opened Sending discover… Starting qmuxd: Starting mbimd: Starting tcf-agent: run\_getty.sh: UART2 (=/dev/t tyHSL0) reserved for CONSOLE [28.824538] PM: Syncing filesystems … noirq resume of devices complete afte r 1.281 msecs [28.954402] PM: early resume of devices complete after 1.587 msecs [28.955653] msm\_hsic\_host msm\_hsic\_host: HSIC-USB exited from low power mode [28.994414] PM: resume of devices complete after 39.981 msecs [29.075507] Restarting tasks … [29.085457] mbim\_read: Requests list is empty. Wait. [29.112498] done. [Next page](https://mangoh.discourse.group/t/wifi-client-scan-connect-error/299.md?page=2)