# Using an HLxxxx module on mangoh green?

**URL:** <https://mangoh.discourse.group/t/using-an-hlxxxx-module-on-mangoh-green/1276>\
**Category:** mangOH Green\
**Created:** [March 26, 2018, 9:01am UTC](https://mangoh.discourse.group/t/using-an-hlxxxx-module-on-mangoh-green/1276 "2018-03-26T09:01:49Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![lotam](https://avatars.discourse-cdn.com/v4/letter/l/958977/32.png) [@lotam](https://mangoh.discourse.group/u/lotam)\
**Post date:** [March 28, 2018, 5:37am UTC](https://mangoh.discourse.group/t/using-an-hlxxxx-module-on-mangoh-green/1276/2 "2018-03-28T05:37:19Z")

</div>

Hi yorgas,  
Yes, we can use HL on mangOH board.  
And already several discussion on this forum, i.e.

> [@Can I use HL8xxx instead of WP8xxxx module?](https://mangoh.discourse.group/t/can-i-use-hl8xxx-instead-of-wp8xxxx-module/49/2):
>
> mangOH supports both HL and WP modules. Please chose the module that fits your use cases. Can you tell me more about your use case? You can send a private message to me via this forum if you don’t want to disclose information. cheers, Ashish

About application processor, you are correct HL does not support it.  
But as you are using MangOH green, maybe you can make use the ATmega on MangOH green.

Set CN307 pin 6 to ON position to bridge HL UART1 and Atmega so you can run your application inside Atmega and to control HL.  
Please refer to developer guide for details.

Hope it helps.

---

_[View the full topic](https://mangoh.discourse.group/t/using-an-hlxxxx-module-on-mangoh-green/1276)._