# Unknown error in "atServerIntegrationTest" due to specific API loading

**URL:** <https://mangoh.discourse.group/t/unknown-error-in-atserverintegrationtest-due-to-specific-api-loading/10129>\
**Category:** Uncategorized\
**Created:** [September 30, 2022, 1:43am UTC](https://mangoh.discourse.group/t/unknown-error-in-atserverintegrationtest-due-to-specific-api-loading/10129 "2022-09-30T01:43:32Z")\
**Posts on this page:** 1\
**Showing post:** 6

<div class="post-metadata">

**Author:** ![jyijyi](https://sea2.discourse-cdn.com/flex016/user_avatar/mangoh.discourse.group/jyijyi/32/997_2.png) [@jyijyi](https://mangoh.discourse.group/u/jyijyi)\
**Post date:** [October 4, 2022, 5:35am UTC](https://mangoh.discourse.group/t/unknown-error-in-atserverintegrationtest-due-to-specific-api-loading/10129/6 "2022-10-04T05:35:42Z")

</div>

does it work for AT+KHTTPCFG if you are using the code here?

> [@AT cmds for Mirage Talon from MangoH Red board AT port](https://mangoh.discourse.group/t/at-cmds-for-mirage-talon-from-mangoh-red-board-at-port/4803/17):
>
> You can use my attached application as reference. Steps: enter the following AT commands in AT command port: AT!ENTERCND=“A710” AT!USBCOMP=1,1,8014D at!RESET compile and download the application in console type the following: app runProc atServerIntegrationTest --exe=atServerTest – tty /dev/ttyGS1 in the new raw data port (check in device manager), type ATE1, you should see the following response: E TYPE: PARA E PARAM 0: 1 OK at+bridge=“OPEN” +BRIDGE TYPE: PARA +BRID…

If it works, you can modify the code of +KHTTPCFG

---

_[View the full topic](https://mangoh.discourse.group/t/unknown-error-in-atserverintegrationtest-due-to-specific-api-loading/10129)._