Unknown error in "atServerIntegrationTest" due to specific API loading

[jyijyi]

does it work for AT+KHTTPCFG if you are using the code here?

AT cmds for Mirage Talon from MangoH Red board AT port

You can use my attached application as reference. Steps: enter the following AT commands in AT command port: AT!ENTERCND=“A710” AT!USBCOMP=1,1,8014D at!RESET compile and download the application in console type the following: app runProc atServerIntegrationTest --exe=atServerTest – tty /dev/ttyGS1 in the new raw data port (check in device manager), type ATE1, you should see the following response: E TYPE: PARA E PARAM 0: 1 OK at+bridge=“OPEN” +BRIDGE TYPE: PARA +BRID…

If it works, you can modify the code of +KHTTPCFG