# ULPM current consumption on MangoH red

**URL:** <https://mangoh.discourse.group/t/ulpm-current-consumption-on-mangoh-red/2352>\
**Category:** mangOH Red\
**Created:** [February 3, 2019, 8:31pm UTC](https://mangoh.discourse.group/t/ulpm-current-consumption-on-mangoh-red/2352 "2019-02-03T20:31:12Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![moshehoori](https://avatars.discourse-cdn.com/v4/letter/m/f475e1/32.png) [@moshehoori](https://mangoh.discourse.group/u/moshehoori)\
**Post date:** [February 3, 2019, 8:31pm UTC](https://mangoh.discourse.group/t/ulpm-current-consumption-on-mangoh-red/2352/1 "2019-02-03T20:31:12Z")

</div>

Hi,

What is the Minimum Current consumption for the MangoH red, in ULPM mode?

I know that the WPXXX can get \<1ma. but what about the whole mangoH red board?

Thanks

---

<div class="post-metadata">

**Author:** ![asyal](https://sea2.discourse-cdn.com/flex016/user_avatar/mangoh.discourse.group/asyal/32/78_2.png) [@asyal](https://mangoh.discourse.group/u/asyal)\
**Post date:** [February 5, 2019, 5:30am UTC](https://mangoh.discourse.group/t/ulpm-current-consumption-on-mangoh-red/2352/2 "2019-02-05T05:30:58Z")

</div>

Current consumption is around 100ua in ULPM . If you have the switch 3on, then the current consumption is determined by the sensor state .