Objective: Configure a MangOH to route cellular internet data to/from other network interfaces. For example the image below shows how we will route traffic to/from the ethernet IoT slot to/from the cellular gateway. [IMG_2399] Solution: To configure the MangOH to route data to/from network int…

I tried re running sudo ifconfig commands you mentioned before and got it to ssh into mangoh red [Screenshot from 2020-08-18 13-45-25] but why is this necessary, is there anyway I can fix the naming or reassign it its default IP address, so that I do not have to take extra steps to talk to it?

I think if I modify the LAN configuration per the steps above when running cfg_gateway.sh I may be able to fix the ssh issue (not sure just speculation). So I started to run it as normal and ran into this issue where it tries to bring up LAN eth0 and fails [Screenshot from 2020-08-18 16-19-49] Wh…

no idea as i don’t see problem: root@swi-mdm9x28-wp:~# echo 2 > /sys/class/gpio/export root@swi-mdm9x28-wp:~# echo out > /sys/class/gpio/gpio2/direction root@swi-mdm9x28-wp:~# echo 1 > /sys/class/gpio/gpio2/value root@swi-mdm9x28-wp:~# ./cfg_gateway.sh MangOH gateway configuration Enter WAN (…

I see that you access cfg_gateway.sh from the main directory of your root device. I have this file placed in the /tmp folder, should this be in the main directory like yours?

I don’t think so, but you can give a try

Here is my output, I see that you have an APN of hkcsl and I have one of internet.sierrawireless.com after I set the apn to the default it does its own thing then fails to flush iptables, it says no chain/target to match by that name? root@swi-mdm9x28-wp:~# cd /tmp root@swi-mdm9x28-wp:/tmp# ls -l …

seems you solved the eth0 problem. I have no idea about your “No chain/target/match by that name”. Here is my script, you can give a try. cfg_gateway.sh (8.2 KB)

@jyijyi I tried using the cfg_gateway.sh file but the APN is not compatible with my network service provider. I did not get a Flush iptables failed error this time however I am getting a new error [Screenshot from 2020-08-20 14-44-00] I checked and this file is actually in the /usr/Sbin/ folder [Sc…

I can see this file in my WP77 module FW R9. root@fx30:~# ls /usr/bin/dns* /usr/bin/dnsmasq

interesting. the FW revision I am using is rev. 13. should i be using rev 9?

Setting up MangOH Red as Router to Cellular Gateway

Wiki

jyijyi January 3, 2021, 11:43am 60

I don’t see problem, mayby it related to your PC

Topic		Replies	Views
Unable to use USB to Ethernet IOT card mangOH Red	16	3767	August 19, 2020
How to connect Ethernet card on mangOH red Uncategorized	8	951	July 20, 2021
mangOH Red lost 192.168.2.2 IP & MT7697 Setup mangOH Red	50	5632	October 24, 2018
IP Forwarding on MangoH Red Board mangOH Red	13	1032	July 6, 2020
Can't ping/ssh anymore my mangOH Red mangOH Red	8	923	December 1, 2020

Setting up MangOH Red as Router to Cellular Gateway

Related topics