# Send data to HL7802 **URL:** \ **Category:** mangOH Red\ **Created:** [February 28, 2022, 9:21am UTC](https://mangoh.discourse.group/t/send-data-to-hl7802/9876 "2022-02-28T09:21:14Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![quentinvalenti](https://avatars.discourse-cdn.com/v4/letter/q/a8b319/32.png) [@quentinvalenti](https://mangoh.discourse.group/u/quentinvalenti)\ **Post date:** [February 28, 2022, 9:21am UTC](https://mangoh.discourse.group/t/send-data-to-hl7802/9876/1 "2022-02-28T09:21:14Z")
Hi, I have a problem with my mangoh Red. I use the good settings for my terminal emulator and when I enter AT I can’t see anything. My port is the port of my IoT card and the powered LED is turn on. Do you have an idea of where is my problem? Thank you ---
**Author:** ![jyijyi](https://sea2.discourse-cdn.com/flex016/user_avatar/mangoh.discourse.group/jyijyi/32/997_2.png) [@jyijyi](https://mangoh.discourse.group/u/jyijyi)\ **Post date:** [February 28, 2022, 9:57am UTC](https://mangoh.discourse.group/t/send-data-to-hl7802/9876/2 "2022-02-28T09:57:32Z")
you can see here: > [@Mangoh Red HL7800 Strange AT commands](https://mangoh.discourse.group/t/mangoh-red-hl7800-strange-at-commands/4253): > > Hello, I am trying to send AT commands to my HL7800 module on my mangoh red board, but it is acting strange… I have a TTL cable connected from my computer to pin 8 and pin 10, and USB going into CN305, GNSS and Cellular antennas and a LiPo connected. If I send AT, some times it responds with OK, and some times it responds with ERROR or some strange characters. AT OK AT IU AT ERROR AT ] AT OK My settings are 115200,N,8,1 with flow control turned off. Lastly, If I connect the UART -\>… ---
**Author:** ![quentinvalenti](https://avatars.discourse-cdn.com/v4/letter/q/a8b319/32.png) [@quentinvalenti](https://mangoh.discourse.group/u/quentinvalenti)\ **Post date:** [February 28, 2022, 9:59am UTC](https://mangoh.discourse.group/t/send-data-to-hl7802/9876/3 "2022-02-28T09:59:25Z")
Thank you I will see