# Read sensors in mangoh yellow

**URL:** <https://mangoh.discourse.group/t/read-sensors-in-mangoh-yellow/3505>\
**Category:** mangOH Yellow\
**Created:** [January 21, 2020, 7:12am UTC](https://mangoh.discourse.group/t/read-sensors-in-mangoh-yellow/3505 "2020-01-21T07:12:52Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![SeongBeom27](https://avatars.discourse-cdn.com/v4/letter/s/76d3ee/32.png) [@SeongBeom27](https://mangoh.discourse.group/u/SeongBeom27)\
**Post date:** [January 21, 2020, 7:12am UTC](https://mangoh.discourse.group/t/read-sensors-in-mangoh-yellow/3505/1 "2020-01-21T07:12:52Z")

</div>

Is there any way to read the gyro, humi, temp etc. sensors inside the mangoh yellow?

If you look at the mangoh yellow data sheet, it looks like you’re going to PORT1\_I2C\_SCL. Is there a way to read this data?

I don’t mind the other way around. I beg you.