# qmiCli connecto to the modem **URL:** \ **Category:** Uncategorized\ **Created:** [January 3, 2022, 8:52am UTC](https://mangoh.discourse.group/t/qmicli-connecto-to-the-modem/9816 "2022-01-03T08:52:06Z")\ **Posts on this page:** 12\ **Page:** 1
**Author:** ![gennadyk](https://avatars.discourse-cdn.com/v4/letter/g/94ad74/32.png) [@gennadyk](https://mangoh.discourse.group/u/gennadyk)\ **Post date:** [January 3, 2022, 8:52am UTC](https://mangoh.discourse.group/t/qmicli-connecto-to-the-modem/9816/1 "2022-01-03T08:52:06Z")
Hello. how can i can connect to modem via qmicli in linux of the target? mangoYellow ---
**Author:** ![jyijyi](https://sea2.discourse-cdn.com/flex016/user_avatar/mangoh.discourse.group/jyijyi/32/997_2.png) [@jyijyi](https://mangoh.discourse.group/u/jyijyi)\ **Post date:** [January 3, 2022, 9:10am UTC](https://mangoh.discourse.group/t/qmicli-connecto-to-the-modem/9816/2 "2022-01-03T09:10:12Z")
you need to install the USB driver MBPL\_Drivers\_R24\_ENG3-src.tar in here: [https://source.sierrawireless.com/resources/airprime/software/mbpl/mbpl-software-latest/#sthash.k5s0Kbvy.dpbs](https://source.sierrawireless.com/resources/airprime/software/mbpl/mbpl-software-latest/#sthash.k5s0Kbvy.dpbs) You can also see here: > **[Example on establishing data connection by AT!SCACT via MBPL R20 driver](https://forum.sierrawireless.com/t/example-on-establishing-data-connection-by-at-scact-via-mbpl-r20-driver/24130)** > > Here is an example to establish data connection by AT!SCACT via MBPL R20 driver: Module: WP7609 FW: R13 MBPL: R20 PC Environment: Ubuntu 18 need to install the MBPL R20 driver for qmi\_wwan and qcserial (MBPL\_Drivers\_USB\_R20\_ENG1-src.tar.gz)... ---
**Author:** ![gennadyk](https://avatars.discourse-cdn.com/v4/letter/g/94ad74/32.png) [@gennadyk](https://mangoh.discourse.group/u/gennadyk)\ **Post date:** [January 3, 2022, 9:19am UTC](https://mangoh.discourse.group/t/qmicli-connecto-to-the-modem/9816/3 "2022-01-03T09:19:11Z")
no i want coonect to the modedm on th board from board 😃 ssh to 192.168.2.2 and from 192.168.2.2 connect to modem ---
**Author:** ![jyijyi](https://sea2.discourse-cdn.com/flex016/user_avatar/mangoh.discourse.group/jyijyi/32/997_2.png) [@jyijyi](https://mangoh.discourse.group/u/jyijyi)\ **Post date:** [January 3, 2022, 9:22am UTC](https://mangoh.discourse.group/t/qmicli-connecto-to-the-modem/9816/4 "2022-01-03T09:22:25Z")
192.168.2.2 is USB ECM port, not QMI port, so you cannot use qmilci on this interface. ---
**Author:** ![gennadyk](https://avatars.discourse-cdn.com/v4/letter/g/94ad74/32.png) [@gennadyk](https://mangoh.discourse.group/u/gennadyk)\ **Post date:** [January 3, 2022, 9:24am UTC](https://mangoh.discourse.group/t/qmicli-connecto-to-the-modem/9816/5 "2022-01-03T09:24:35Z")
so from mangoh i can’t connect ot modedm by qmi? ---
**Author:** ![jyijyi](https://sea2.discourse-cdn.com/flex016/user_avatar/mangoh.discourse.group/jyijyi/32/997_2.png) [@jyijyi](https://mangoh.discourse.group/u/jyijyi)\ **Post date:** [January 3, 2022, 9:37am UTC](https://mangoh.discourse.group/t/qmicli-connecto-to-the-modem/9816/6 "2022-01-03T09:37:15Z")
you need to install the MBPL USB driver as said above to use cdc-wwan0 ---
**Author:** ![gennadyk](https://avatars.discourse-cdn.com/v4/letter/g/94ad74/32.png) [@gennadyk](https://mangoh.discourse.group/u/gennadyk)\ **Post date:** [January 3, 2022, 9:56am UTC](https://mangoh.discourse.group/t/qmicli-connecto-to-the-modem/9816/7 "2022-01-03T09:56:12Z")
if I can compile drivers for the arvmv7 architecture (mangoh), transfer them to my board, then I can use qmi cli? ---
**Author:** ![gennadyk](https://avatars.discourse-cdn.com/v4/letter/g/94ad74/32.png) [@gennadyk](https://mangoh.discourse.group/u/gennadyk)\ **Post date:** [January 3, 2022, 9:57am UTC](https://mangoh.discourse.group/t/qmicli-connecto-to-the-modem/9816/8 "2022-01-03T09:57:26Z")
my main task is to make internet connections without cm and legato. ---
**Author:** ![jyijyi](https://sea2.discourse-cdn.com/flex016/user_avatar/mangoh.discourse.group/jyijyi/32/997_2.png) [@jyijyi](https://mangoh.discourse.group/u/jyijyi)\ **Post date:** [January 3, 2022, 10:05am UTC](https://mangoh.discourse.group/t/qmicli-connecto-to-the-modem/9816/10 "2022-01-03T10:05:29Z")
I think you can only use the cm tool or legato API to make the yocto linux of module to go internet. ---
**Author:** ![gennadyk](https://avatars.discourse-cdn.com/v4/letter/g/94ad74/32.png) [@gennadyk](https://mangoh.discourse.group/u/gennadyk)\ **Post date:** [January 3, 2022, 10:08am UTC](https://mangoh.discourse.group/t/qmicli-connecto-to-the-modem/9816/11 "2022-01-03T10:08:24Z")
so, if I can install drivers and qmi may it not work? ---
**Author:** ![jyijyi](https://sea2.discourse-cdn.com/flex016/user_avatar/mangoh.discourse.group/jyijyi/32/997_2.png) [@jyijyi](https://mangoh.discourse.group/u/jyijyi)\ **Post date:** [January 3, 2022, 10:20am UTC](https://mangoh.discourse.group/t/qmicli-connecto-to-the-modem/9816/12 "2022-01-03T10:20:52Z")
The driver is for linux host platform connecting to module, not for internal yocto linux ---
**Author:** ![gennadyk](https://avatars.discourse-cdn.com/v4/letter/g/94ad74/32.png) [@gennadyk](https://mangoh.discourse.group/u/gennadyk)\ **Post date:** [January 3, 2022, 10:22am UTC](https://mangoh.discourse.group/t/qmicli-connecto-to-the-modem/9816/13 "2022-01-03T10:22:48Z")
i understood thanks.