# Password mangOH Yellow SSH Session

**URL:** <https://mangoh.discourse.group/t/password-mangoh-yellow-ssh-session/5611>\
**Category:** mangOH Yellow\
**Created:** [November 9, 2020, 1:19pm UTC](https://mangoh.discourse.group/t/password-mangoh-yellow-ssh-session/5611 "2020-11-09T13:19:44Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![sebastienmaviel](https://avatars.discourse-cdn.com/v4/letter/s/8e7dd6/32.png) [@sebastienmaviel](https://mangoh.discourse.group/u/sebastienmaviel)\
**Post date:** [November 9, 2020, 1:19pm UTC](https://mangoh.discourse.group/t/password-mangoh-yellow-ssh-session/5611/1 "2020-11-09T13:19:44Z")

</div>

Hey,

I am trying to access via SSH to a mangOH Yellow (Which is not mine), I am asked for a password, however, I do not have any.  
I reset the chip with the command: _ **swiflash -m wp77xx -i WP77xx\_Release13\_SIERRA.spk** _.

However, even after a successfully reset I am still asked to give a password.  
(…) ssh [root@192.168.2.2](mailto:root@192.168.2.2)  
[root@192.168.2.2](mailto:root@192.168.2.2)’s password:  
Permission denied, please try again.  
[root@192.168.2.2](mailto:root@192.168.2.2)’s password:

Is there a default one with this spk ?

Note that when trying another reset, I got this:

```
    $ swiflash -m wp77xx -r
Detecting USB of the target
DONE
Communicating with the target
DONE
Switching to firmware download mode
............DONE
Downloading the firmware
..ERROR: Firmware Download failed. Callback status 59399ERROR: Firmware Download Failed
DONE

```

Thx for your support.

---

<div class="post-metadata">

**Author:** ![jyijyi](https://sea2.discourse-cdn.com/flex016/user_avatar/mangoh.discourse.group/jyijyi/32/997_2.png) [@jyijyi](https://mangoh.discourse.group/u/jyijyi)\
**Post date:** [November 9, 2020, 1:36pm UTC](https://mangoh.discourse.group/t/password-mangoh-yellow-ssh-session/5611/2 "2020-11-09T13:36:44Z")

</div>

same issue as this one:

> [@Cannot access MangOH Yellow wp7702](https://mangoh.discourse.group/t/cannot-access-mangoh-yellow-wp7702/4848/21):
>
> For the working one, I can enter commands through cutecom, and ifconfig ecm0 responds correctly Otherwise, with the other I cannot enter any command just this line loop: swi-mdm9x28-wp user.err kernel: [49.040354] wait\_for\_irsc\_completion: waiting for IPC Security Conf. Like the boot steps are not finished and give me no access to the board

---

<div class="post-metadata">

**Author:** ![sebastienmaviel](https://avatars.discourse-cdn.com/v4/letter/s/8e7dd6/32.png) [@sebastienmaviel](https://mangoh.discourse.group/u/sebastienmaviel)\
**Post date:** [November 9, 2020, 1:55pm UTC](https://mangoh.discourse.group/t/password-mangoh-yellow-ssh-session/5611/3 "2020-11-09T13:55:34Z")

</div>

Switch back to R9, did the -r, for then came back to R13.

Works like a charm.

Thanks !