# New mangoRed can't ping and no console output - is it a DOA?

**URL:** <https://mangoh.discourse.group/t/new-mangored-cant-ping-and-no-console-output-is-it-a-doa/2309>\
**Category:** mangOH Red\
**Created:** [January 15, 2019, 10:22pm UTC](https://mangoh.discourse.group/t/new-mangored-cant-ping-and-no-console-output-is-it-a-doa/2309 "2019-01-15T22:22:31Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![mpetersen](https://sea2.discourse-cdn.com/flex016/user_avatar/mangoh.discourse.group/mpetersen/32/1177_2.png) [@mpetersen](https://mangoh.discourse.group/u/mpetersen)\
**Post date:** [January 15, 2019, 10:22pm UTC](https://mangoh.discourse.group/t/new-mangored-cant-ping-and-no-console-output-is-it-a-doa/2309/1 "2019-01-15T22:22:31Z")

</div>

USB ports appear to be enumerated to my VirtualBox VM:

- Sierra Wireless,…WP7700 [318]
- FTDI FT230X Basic UART [1000]

And the Green LED’s do illuminate (both top & bottom of PCB).

mbp@ubuntu:~$ ping 192.168.2.2  
PING 192.168.2.2 (192.168.2.2) 56(84) bytes of data.  
From 192.168.0.2 icmp\_seq=1 Destination Host Unreachable  
From 192.168.0.2 icmp\_seq=2 Destination Host Unreachable  
From 192.168.0.2 icmp\_seq=3 Destination Host Unreachable

Never see any boot or power-up output in serial terminal.

Have checked and rechecked all steps and configuration settings multiple times. Never a response from Ping nor any output on the serial terminal.

Using moserial as serial terminal. Assuming 8N1, What is Baud rate?

I have not activated the SIM card yet - and I won’t until I can validate the Red modules is alive and I can Ping it.

Appreciate any input and next steps. I feel like I’m standing to close - all I see is bark so I can’t see any trees!

Thanks,  
Mike

---

<div class="post-metadata">

**Author:** ![mpetersen](https://sea2.discourse-cdn.com/flex016/user_avatar/mangoh.discourse.group/mpetersen/32/1177_2.png) [@mpetersen](https://mangoh.discourse.group/u/mpetersen)\
**Post date:** [January 16, 2019, 4:59pm UTC](https://mangoh.discourse.group/t/new-mangored-cant-ping-and-no-console-output-is-it-a-doa/2309/2 "2019-01-16T16:59:38Z")

</div>

Upon power-cycle using the jumpers with USB’s connected I do get Serial data out - garbled. This is indication of incorrect Baudrate. Updated to 115.2kbps and rebooted.

Now I am seeing Red boot console output (bottom).

Ping continues to fail as noted in first posting. Document indicates SIM card activation is not required for Ping. Is this correct? (or must the SIM card be activated?).

Serial console port output:  
Format: Log Type - Time(microsec) - Message - Optional Info  
Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic  
S - QC\_IMAGE\_VERSION\_STRING=BOOT.BF.3.1.2-00084  
S - IMAGE\_VARIANT\_STRING=LAATANAZA  
S - OEM\_IMAGE\_VERSION\_STRING=jenkins  
S - Boot Config, 0x000002e1  
B - 1216 - PBL, Start  
B - 3720 - bootable\_media\_detect\_entry, Start  
B - 5037 - bootable\_media\_detect\_success, Start  
B - 5042 - elf\_loader\_entry, Start  
B - 8494 - auth\_hash\_seg\_entry, Start  
B - 32161 - auth\_hash\_seg\_exit, Start  
B - 83157 - elf\_segs\_hash\_verify\_entry, Start  
B - 130163 - PBL, End  
B - 119773 - SBL1, Start  
B - 169702 - pm\_device\_init, Start  
B - 187422 - PM\_SET\_VAL:Skip  
D - 16439 - pm\_device\_init, Delta  
B - 188764 - boot\_config\_data\_table\_init, Start  
D - 30 - boot\_config\_data\_table\_init, Delta - (0 Bytes)  
B - 197518 - CDT version:3,Platform ID:8,Major ID:1,Minor ID:0,Subtype:129  
B - 204411 - sbl1\_ddr\_set\_params, Start  
B - 208254 - Pre\_DDR\_clock\_init, Start  
D - 213 - Pre\_DDR\_clock\_init, Delta  
D - 0 - sbl1\_ddr\_set\_params, Delta  
B - 220942 - pm\_driver\_init, Start  
D - 4483 - pm\_driver\_init, Delta  
B - 227225 - cpr\_init, Start  
D - 122 - cpr\_init, Delta  
B - 231800 - cpr\_cx\_mx\_apc\_vol\_update, Start  
D - 91 - cpr\_cx\_mx\_apc\_vol\_update, Delta  
B - 247019 - clock\_init, Start  
D - 152 - clock\_init, Delta  
B - 247263 - boot\_flash\_init, Start  
D - 40107 - boot\_flash\_init, Delta  
B - 748409 - boot\_flash\_swi\_ddr\_init, Start  
D - 28822 - boot\_flash\_swi\_ddr\_init, Delta  
B - 891545 - hw\_family:5, hw\_type:21, hw\_rev:40  
B - 892125 - cannot detect SSMEM base  
B - 893345 - SSMEM bad, reinit  
B - 897554 - SSMEM init OK  
B - 918202 - opening partition 0:SWIFOTA  
B - 918873 - error for readpage:0  
B - 935130 - Failed to read size: /swinv/item\_files/CUST\_IM\_SWITCH\_HIDE  
B - 940925 - Failed to read size: /swinv/item\_files/FOTA\_PARTITION  
B - 941992 - Failed to read size: /swinv/item\_files/CUST\_IM\_CONFIG  
B - 955290 - ssmem\_get: region 21 not exists  
B - 962885 - ssmem\_release: region 20 not exists  
B - 962946 - ssmem\_get: region 20 not exists  
B - 968771 - Image Load, Start  
D - 94825 - QSEE Image Loaded, Delta - (490996 Bytes)  
D - 183 - boot\_pm\_post\_tz\_device\_init, Delta  
B - 1067988 - sbl1\_efs\_handle\_cookies, Start  
D - 0 - sbl1\_efs\_handle\_cookies, Delta  
B - 1076009 - DEVCFG ELF verification failure  
B - 1079547 - Image Load, Start  
D - 0 - SEC Image Loaded, Delta - (0 Bytes)  
B - 1087233 - Image Load, Start  
D - 55632 - RPM Image Loaded, Delta - (150424 Bytes)  
B - 1142926 - Image Load, Start  
B - 1145885 - Auth disabled for image 9  
B - 1185382 - ssmem\_get: region 20 not exists  
D - 42517 - APPSBL Image Loaded, Delta - (378664 Bytes)  
B - 1188646 - QSEE Execution, Start  
D - 854 - QSEE Execution, Delta  
B - 1195356 - SBL1, End  
D - 1077931 - SBL1, Delta  
S - Throughput, 8000 KB/s (1190772 Bytes, 135626 us)  
S - DDR Frequency, 240 MHz  
Android Bootloader - UART\_DM Initialized!!!  
[10] Qseecom Init Done in Appsbl  
[10] secure app region addr=0x87900000 size=0x280000[10] TZ App region notif returned with status:0 addr:87900000 size:2621440  
[20] TZ App log region register returned with status:0 addr:82679000 size:4096  
[30] Qseecom TZ Init Done in Appsbl  
[30] ERROR: No devinfo partition found  
[30] Neither ‘config’ nor ‘frp’ partition found  
[40] ERROR: No misc partition found  
[1100] SSMEM init OK[1100] ssmem\_get: region 20 not exists[1190] DEBUG: cmdline has root=  
[1320] Channel alloc freed  
[0.000000] GIC CPU mask not found - kernel will fail to boot.  
[0.000000] GIC CPU mask not found - kernel will fail to boot.  
[0.000000] MPM 1 irq mapping errored -517  
[0.076675] SWI ssmem\_framework\_init: SSMEM init OK  
[0.216137] spmi\_pmic\_arb 200f000.qcom,spmi: PMIC Arb Version-2 0x20010000  
[0.231980] msm\_mpm\_dev\_probe(): Cannot get clk resource for XO: -517  
[0.235179] smd\_channel\_probe\_now: allocation table not initialized  
[0.243085] msm\_thermal:msm\_thermal\_dev\_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517  
[0.271577] msm\_mpm\_dev\_probe(): Cannot get clk resource for XO: -517  
[0.274606] msm\_thermal:get\_kernel\_cluster\_info CPU0 topology not initialized.  
[0.275514] cpu cpu0: dev\_pm\_opp\_get\_opp\_count: device OPP not found (-19)  
[0.275533] msm\_thermal:get\_cpu\_freq\_plan\_len Error reading CPU0 freq table len. error:-19  
[0.276270] cpu cpu0: dev\_pm\_opp\_get\_opp\_count: device OPP not found (-19)  
[0.276288] msm\_thermal:get\_cpu\_freq\_plan\_len Error reading CPU0 freq table len. error:-19  
[0.276304] cpu cpu0: dev\_pm\_opp\_get\_opp\_count: device OPP not found (-19)  
[0.276317] msm\_thermal:get\_cpu\_freq\_plan\_len Error reading CPU0 freq table len. error:-19  
[0.370502] AXI: msm\_bus\_scale\_register\_client(): msm\_bus\_scale\_register\_client: Bus driver not ready.  
[0.372295] AXI: msm\_bus\_scale\_register\_client(): msm\_bus\_scale\_register\_client: Bus driver not ready.[0.372587] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv\_addr:0x3a MSTR\_STS:0x0c1343c8 OPER:0x00000090  
[0.428668] msm\_bus\_fabric\_init\_driver  
[0.648290] scm\_call failed with error code -4  
[0.648309] msm\_audio\_protect\_memory\_region: SCM call failed, scm\_call\_ret -95 tz\_resp 0  
[0.654105] uart\_tx\_gpio is not available  
[0.654125] uart\_rx\_gpio is not available  
[0.654145] uart\_cts\_gpio is not available  
[0.654165] uart\_rfr\_gpio is not available  
[0.654883] sps: BAM device 0x07884000 is not registered yet.  
[0.660508] AXI: get\_pdata(): Error: Client name not found  
[0.660520] AXI: msm\_bus\_cl\_get\_pdata(): client has to provide missing entry for successful registration  
[0.660528] msm\_serial\_hsl\_probe: Bus scaling is disabled  
[0.863574] mdm9607-pinctrl 1000000.pinctrl: pin GPIO\_4 already requested by 78b0000.uart; cannot claim for 78b0000.serial  
[0.874014] mdm9607-pinctrl 1000000.pinctrl: pin-4 (78b0000.serial) status -22  
[0.881188] mdm9607-pinctrl 1000000.pinctrl: could not request pin 4 (GPIO\_4) from group gpio4 on device 1000000.pinctrl  
[0.892127] msm\_serial\_hsl 78b0000.serial: Error applying setting, reverse things back  
[0.954358] sps: BAM device 0x07984000 is not registered yet.  
[1.041957] unable to find DT imem DLOAD mode node  
[1.046041] unable to find DT imem EDLOAD mode node  
[1.051063] unable to find DT imem dload-type node  
[1.055535] Failed to disable secure wdog debug: -4  
[1.087481] devfreq soc:qcom,cpubw: Couldn’t update frequency transition information.  
[1.095626] sdhci\_msm 7864900.sdhci: sdhci\_msm\_pm\_qos\_parse\_irq: error -22 reading irq cpu  
[1.107107] coresight-tmc 6025000.tmc: failed to get flush cti  
[1.112503] coresight-tmc 6025000.tmc: failed to get reset cti  
[1.181655] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm\_asoc\_machine\_probe, q6\_state 0  
[1.203489] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm\_asoc\_machine\_probe, q6\_state 0  
[1.211420] wl12xx GPIO: 131  
[1.233088] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm\_asoc\_machine\_probe, q6\_state 0  
[1.255054] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm\_asoc\_machine\_probe, q6\_state 0  
[1.263926] calculate\_residency: residency \< 0 for LPM  
[1.268028] parse\_cpu\_levels: idx 1 420  
[1.280511] calculate\_residency: residency \< 0 for LPM  
[1.284623] parse\_cpu\_levels: idx 2 500  
[1.300155] parse\_cpu\_levels: idx 2 3040  
[1.304100] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm\_asoc\_machine\_probe, q6\_state 0  
[1.320716] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm\_asoc\_machine\_probe, q6\_state 0  
Setting up IMA subsystem…  
IMA is not supported.  
The proc node does not exist  
mount root fs from partition (rootfs|system)  
Non-secure.  
[1.503743] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm\_asoc\_machine\_probe, q6\_state 0  
UBI device number 0, total 120 LEBs (30474240 bytes, 29.1 MiB), available 2 LEBs (507904 bytes, 496.0 KiB), LEB size 253952 bytes (248.0 KiB)  
[1.894517] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm\_asoc\_machine\_probe, q6\_state 0  
rootfs roothash: e66529f349e057e9e314b2ece1516cd2adc87b1b46209d1cfb25550d1fb4cb16  
rootfs: dev ‘/dev/ubiblock0\_0’ ‘squashfs’  
mount /dev/mapper/rt  
rootfs: mounting took 0ms

init started: BusyBox v1.24.1 (2018-02-19 00:41:11 UTC)  
rcS: Executing mount\_essential\_fs…  
rcS: Executing simple\_network…  
rcS: Executing run\_S\_scripts…  
S02mount\_early: Executing mount\_early\_pseudo…  
S02mount\_early: Executing mount\_early\_other…  
S02mount\_early: Executing mount\_early\_create\_dirs…  
S02mount\_early: Executing yaffs2\_kern\_supported\_init…  
S02mount\_early: Executing mount\_early\_user\_start…  
S02mount\_early: RO rootfs fudge allowed.  
S02mount\_early: User is forcing userapp file system to be ubifs.  
S02mount\_early: Trying to mount UBIFS on /mnt/flash using [usrquota,grpquota,rw] mount options…  
UBI device number 3, total 524 LEBs (133070848 bytes, 126.9 MiB), available 5 LEBs (1269760 bytes, 1.2 MiB), LEB size 253952 bytes (248.0 KiB)  
S02mount\_early: Performing quota check on file system mounted at /mnt/flash  
S02mount\_early: UBIFS volume successfully mounted on /mnt/flash  
S02mount\_early: Executing mount\_early\_legato\_start…  
sh: 200: unknown operand  
mount Legato from partition lefwkro  
S02mount\_early: Non-secure.  
UBI device number 2, total 35 LEBs (8888320 bytes, 8.5 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB)  
S02mount\_early: SQUASHFS successfully mounted on /mnt/legato  
S02mount\_early: Executing mount\_early\_userrw\_start…  
S02mount\_early: Mounting swirw file system as UBIFS  
S02mount\_early: Trying to mount UBIFS on /mnt/userrw using [usrquota,grpquota,rw] mount options…  
UBI device number 4, total 100 LEBs (25395200 bytes, 24.2 MiB), available 2 LEBs (507904 bytes, 496.0 KiB), LEB size 253952 bytes (248.0 KiB)  
S02mount\_early: Performing quota check on file system mounted at /mnt/userrw  
S02mount\_early: UBIFS volume successfully mounted on /mnt/userrw  
S02mount\_early: swirw mounted to /mnt/userrw  
S03confighw.sh: Kernel internal entropy pool filler is available, increasing write\_wakeup\_threshold to 3072  
Starting system message bus: dbus.  
S07mount\_unionfs: RO rootfs fudge allowed.  
Mounting local filesystems…  
[8.506595] UBIFS error (pid: 464): cannot open “ubi0:usrfs”, error -19mount: mounting ubi0:usrfs on /usr failed: No such device  
sh: 200: unknown operand  
mount modem from partition modem  
MTD : Detected block device : /firmware for modem

UBI device number 1, total 128 LEBs (32505856 bytes, 31.0 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB)  
Initializing random number generator…  
Switching to composition sierra\_dev (1199:68C0)  
[8.901990] enable\_store: android\_usb: already disabled  
Configuring network interfaces… done.  
Starting syslogd/klogd: done  
Starting diagrebootapp: ifconfig: SIOCGIFFLAGS: No such device  
done  
$Starting qcom\_time:  
starting time-daemon  
Starting time\_services: done  
Legato start sequence  
restart\_at\_uart: Mapped UART1 for AT service  
[12.769514] i2c-msm-v2 78b8000.i2c: msm\_bus\_scale\_register\_client(mstr-id:86):0xb (ok)  
[12.839341] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv\_addr:0x3a MSTR\_STS:0x001363c8 OPER:0x00000090  
Finished Legato start Sequence  
Starting reboot daemon: done  
Starting atreset: done  
Starting modem dependent daemons: [17.994688] M-Notify: General: 7  
[18.007720] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route MM\_DL5 -\> MultiMedia5 -\> TERT\_MI2S\_RX Audio Mixer  
Load modem done  
Starting qmuxd: [18.053020] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route MM\_DL8 -\> MultiMedia8 -\> TERT\_MI2S\_RX Audio Mixer  
done  
[18.080404] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route INT\_FM\_TX -\> INTERNAL\_FM\_TX -\> SEC\_MI2S\_RX Port Mixer  
Starting thermal-engine: [18.139700] diag: In diag\_send\_feature\_mask\_update, control channel is not open, p: 0, c1073884  
done  
[18.304943] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for MM\_UL28  
Starting irsc\_util: [18.430236] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route MultiMedia28 Mixer -\> direct -\> MM\_UL28  
Starting irsc tool  
Failed to open file:/etc/sec\_config  
Absent/Invalid config,Default rules apply  
Ending irsc tool  
done  
[18.481688] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for MM\_UL29  
[18.489156] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route MultiMedia29 Mixer -\> direct -\> MM\_UL29  
Starting netmgrd: [18.571824] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route VOICEMMODE1\_DL -\> VoiceMMode1 -\> SEC\_MI2S\_RX\_Voice Mixer  
done  
[18.607317] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route VOICEMMODE2\_DL -\> VoiceMMode2 -\> SEC\_MI2S\_RX\_Voice Mixer  
[18.657818] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO\_REF\_EC\_UL28 MUX  
Starting fs-scrub-daemon: 18.704861] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route PRI\_MI2S\_TX -\> PRI\_MI2S\_TX -\> AUDIO\_REF\_EC\_UL28 MUX  
[18.750487] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO\_REF\_EC\_UL28 MUX  
[18.759121] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route SEC\_MI2S\_TX -\> SEC\_MI2S\_TX -\> AUDIO\_REF\_EC\_UL28 MUX  
done  
net.ipv4.conf.default.rp\_filter = 1  
net.ipv4.conf.all.rp\_filter = 1  
[19.107342] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO\_REF\_EC\_UL28 MUX  
rm: can’t remove ‘/var/log/wtmp’: No such file or directory  
[19.210864] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route TERT\_MI2S\_TX -\> TERT\_MI2S\_TX -\> AUDIO\_REF\_EC\_UL28 MUX  
Starting qmi\_ip: [19.325149] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO\_REF\_EC\_UL28 MUX  
[19.398976] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route QUAT\_MI2S\_TX -\> QUAT\_MI2S\_TX -\> AUDIO\_REF\_EC\_UL28 MUX  
done  
[19.525548] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO\_REF\_EC\_UL29 MUX  
[19.600004] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route PRI\_MI2S\_TX -\> PRI\_MI2S\_TX -\> AUDIO\_REF\_EC\_UL29 MUX  
[19.665352] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO\_REF\_EC\_UL29 MUX  
[19.703604] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route SEC\_MI2S\_TX -\> SEC\_MI2S\_TX -\> AUDIO\_REF\_EC\_UL29 MUX  
[19.791475] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO\_REF\_EC\_UL29 MUX  
starting DNS forwarder and DHCP server: dnsmasq… 19.817823] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route TERT\_MI2S\_TX -\> TERT\_MI2S\_TX -\> AUDIO\_REF\_EC\_UL29 MUX  
[19.849192] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO\_REF\_EC\_UL29 MUX  
[19.875084] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route QUAT\_MI2S\_TX -\> QUAT\_MI2S\_TX -\> AUDIO\_REF\_EC\_UL29 MUX  
[19.908438] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no source widget found for AUDIO\_REF\_EC\_UL3 MUX  
done.  
[19.925555] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route AUDIO\_REF\_EC\_UL3 MUX -\> direct -\> MM\_UL3  
[19.944805] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no source widget found for AUDIO\_REF\_EC\_UL28 MUX  
[19.971329] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route AUDIO\_REF\_EC\_UL28 MUX -\> direct -\> MM\_UL28  
Starting Dropbear SSH server: [20.019791] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no source widget found for AUDIO\_REF\_EC\_UL29 MUX  
[20.070463] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route AUDIO\_REF\_EC\_UL29 MUX -\> direct -\> MM\_UL29  
DONE  
[20.141926] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route SEC\_MI2S\_TX -\> SEC\_MI2S\_TX -\> SLIMBUS\_0\_RX Port Mixer  
cat: can’t open ‘/sys/devices/virtual/android\_usb/android0/f\_ecm/native\_ethaddr’: No such file or directory  
dropbear.  
[20.168998] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route VOICE2\_STUB\_DL -\> Voice2 Stub -\> INTERNAL\_BT\_SCO\_RX\_Voice Mixer  
stopping DNS forwarder and DHCP server: dnsmasq… [20.212120] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for SENARY\_MI2S\_TX  
[20.243284] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route BE\_IN -\> direct -\> SENARY\_MI2S\_TX  
stopped /usr/bin/dnsmasq (pid 1037)  
done.  
Starting port\_bridge: starting DNS forwarder and DHCP server: dnsmasq… done  
done.  
run\_getty.sh: ttyHSL1 reserved for CONSOLE

Poky (Yocto Project Reference Distro) 2.2.2 swi-mdm9x28 /dev/ttyHSL1

swi-mdm9x28 login: [20.975735] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: mux SLIM\_0\_RX AANC MUX has no paths  
[21.018367] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-dtmf-tx: ASoC: no sink widget found for STUB\_DTMF\_TX  
[21.060472] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-dtmf-tx: ASoC: Failed to add route DTMF TX -\> direct -\> STUB\_DTMF\_TX  
[21.090467] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-rx-capture-tx: ASoC: no sink widget found for STUB\_HOST\_RX\_CAPTURE\_TX  
[21.117657] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-rx-capture-tx: ASoC: Failed to add route CS-VOICE HOST RX CAPTURE -\> direct -\> STUB\_HOST\_RX\_CAPTURE\_TX  
[21.138217] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-rx-playback-rx: ASoC: no source widget found for STUB\_HOST\_RX\_PLAYBACK\_RX  
[21.150970] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-rx-playback-rx: ASoC: Failed to add route STUB\_HOST\_RX\_PLAYBACK\_RX -\> direct -\> CS-VOICE HOST RX PLAYBACK  
[21.166620] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-tx-capture-tx: ASoC: no sink widget found for STUB\_HOST\_TX\_CAPTURE\_TX  
[21.179615] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-tx-capture-tx: ASoC: Failed to add route CS-VOICE HOST TX CAPTURE -\> direct -\> STUB\_HOST\_TX\_CAPTURE\_TX  
[21.195303] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-tx-playback-rx: ASoC: no source widget found for STUB\_HOST\_TX\_PLAYBACK\_RX  
[21.208478] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-tx-playback-rx: ASoC: Failed to add route STUB\_HOST\_TX\_PLAYBACK\_RX -\> direct -\> CS-VOICE HOST TX PLAYBACK  
[21.841626] adm\_callback: cmd = 0x10322 returned error = 0x16  
[21.846339] adm\_callback: ADM map error, resuming  
[21.851658] adm\_memory\_map\_regions: DSP returned error[ADSP\_ERR\_MAX]  
[21.857362] adm\_map\_cal\_data: map did not work! cal\_type 0 ret -68  
[21.863811] map\_memory: map\_cal failed, cal type 10, ret = -19!  
[21.869430] adm\_alloc\_cal: cal\_utils\_alloc\_block failed, ret = -19, cal type = 10!  
[21.877200] call\_allocs: alloc failed!

Poky (Yocto Project Reference Distro) 2.2.2 swi-mdm9x28 /dev/ttyHSL1

swi-mdm9x28 login: