# Mkapp: command not found **URL:** \ **Category:** mangOH Yellow\ **Created:** [November 19, 2021, 4:00pm UTC](https://mangoh.discourse.group/t/mkapp-command-not-found/9767 "2021-11-19T16:00:31Z")\ **Posts on this page:** 2\ **Page:** 2
**Author:** ![edwinspector](https://avatars.discourse-cdn.com/v4/letter/e/3d9bf3/32.png) [@edwinspector](https://mangoh.discourse.group/u/edwinspector)\ **Post date:** [December 8, 2022, 4:16pm UTC](https://mangoh.discourse.group/t/mkapp-command-not-found/9767/21 "2022-12-08T16:16:35Z")
I have not been using the VSCode UI because I have been trying to follow setup instructions which only use the command line. leaf search -t wp76xx -t latest mangOH-yellow-wp76xx\_0.7.0 │ mangOH yellow wp76xx (Modem=R16, Legato=19.11.3- │ mangoh-red-wp76xx\_0.6.0 │ mangOH Red wp76 - FW=R13.3, Legato=20.04.0, Octa │ swi-fx30-cat1\_2.0.0 │ SDK for FX30-CAT1 (Release R16.0.1.006 + Legato │ swi-wp76\_5.0.5 │ SDK for WP76 (Release 16.1 + Legato 19.11.6) │ swi-wp76\_5.2.0-onlycap │ SDK for WP76 (Release 16 + Legato 20.08.0) I’m not sure whether to pick the mangoh-red- or one of the swi-wp76 options. I have a MangoH Red, but your example shows swi-. I have just tried this installation: $ leaf setup wp776stable -p swi-wp76\_5.0.5 leaf setup wp776stable -p swi-wp76\_5.0.5 [Faulty keyboard keeps giving ‘77’] → Execute: leaf profile create wp776stable Current profile is now wp776stable Profile wp776stable created → Execute: leaf profile config wp776stable -p swi-wp76\_5.0.5 → Execute: leaf profile sync wp776stable Profile is out of sync Packages to install: wp76-legato\_19.11.6-202112100742, wp76-toolchain\_SWI9X07Y\_02.37.10.02-linux64, wp76-modem-image\_16.1, wp76-legato-image\_19.11.6-202206070843, wp76-linux-image\_SWI9X07Y\_02.37.10.02, wp76-image\_5.0.5, swi-legato\_1.4.191225, swi-vscode-support\_200624, swi-wp76\_5.0.5 Total size: 672.5 MB Do you want to continue? (Y/n) Y [100%] Downloading d6f6fca-swi-aptdeps-toolchain\_1.0.leaf Run install steps for swi-aptdeps-toolchain\_1.0 Run sync steps for swi-aptdeps-image\_1.0 Run sync steps for swi-aptdeps-legato\_1.0 Run sync steps for swi-aptdeps-toolchain\_1.0 Run sync steps for swi-license\_1.2 Run sync steps for swi-verify-aptdeps\_1.7.210909 Checking required apt packages… It is recommended to have the latest version of swiflash swicwe sudo apt-get update && sudo apt-get install --upgrade -y swiflash swicwe Do you want to execute this command (Y/n)? Y Hit:1 [http://updatesite.sierrawireless.com/legato-spm/debian](http://updatesite.sierrawireless.com/legato-spm/debian) release/ InRelease \<…snip…\> swicwe is already the newest version (1.27). swiflash is already the newest version (5.2). The following packages were automatically installed and are no longer required: libllvm9 linux-hwe-5.4-headers-5.4.0-131 Use ‘sudo apt autoremove’ to remove them. 0 upgraded, 0 newly installed, 0 to remove and 15 not upgraded. All system dependencies are OK Run sync steps for swi-verify-license\_1.4.190813 License already accepted: sierra-v1 Downloading 9 package(s) [100%] Downloading 404836f-wp76-legato\_19.11.6-202112100742.leaf [100%] Downloading b0e86e4-wp76-toolchain\_SWI9X07Y\_02.37.10.02-linux64.leaf [100%] Downloading f224fbd-wp76-modem-image\_16.1.leaf [100%] Downloading 4449c25-wp76-legato-image\_19.11.6-202206070843.leaf [100%] Downloading 7726802-wp76-linux-image\_SWI9X07Y\_02.37.10.02.leaf [100%] Downloading 113e003-wp76-image\_5.0.5.leaf [100%] Downloading 761d815-swi-wp76\_5.0.5.leaf [1/9] Installing wp76-legato\_19.11.6-202112100742 Run install steps for wp76-legato\_19.11.6-202112100742 [2/9] Installing wp76-toolchain\_SWI9X07Y\_02.37.10.02-linux64 Run install steps for wp76-toolchain\_SWI9X07Y\_02.37.10.02-linux64 Configuring the toolchain for your environment, this may take a few minutes… [3/9] Installing wp76-modem-image\_16.1 [4/9] Installing wp76-legato-image\_19.11.6-202206070843 [5/9] Installing wp76-linux-image\_SWI9X07Y\_02.37.10.02 [6/9] Installing wp76-image\_5.0.5 Run install steps for wp76-image\_5.0.5 Generating device image: 9999999\_9907152\_SWI9X07Y\_02.37.03.05\_00\_GENERIC\_002.115\_002-full.spk Generating device image: \<…snip…\> [8/9] Installing swi-vscode-support\_200624 Run install steps for swi-vscode-support\_200624 [9/9] Installing swi-wp76\_5.0.5 \*\* The prompt has changed to include a new profile name. mkapp now fails in a different way. Now my VM has crashed when I tried to save it. Maybe it ran out of memory from all the packages that were downloaded (it gave a memory warning). Trying again… I may have to delete a load of stuff or start again. ---
**Author:** ![jyijyi](https://sea2.discourse-cdn.com/flex016/user_avatar/mangoh.discourse.group/jyijyi/32/997_2.png) [@jyijyi](https://mangoh.discourse.group/u/jyijyi)\ **Post date:** [December 8, 2022, 4:46pm UTC](https://mangoh.discourse.group/t/mkapp-command-not-found/9767/22 "2022-12-08T16:46:27Z")
Seems the download of the package is ok in your log [Previous page](https://mangoh.discourse.group/t/mkapp-command-not-found/9767.md?page=1)