Hello, I have started working through the new getting started guide (non-octave) for my device. I have reached the step where I am to start redCloud. After this is done, there is no sensor data on my AirVantage account. Any help would be greatly appreciated. Thanks

seems you can make it work in the past: [image] Air Vantage issues mangOH Red do you enable switch 3 om SW401 on the board? Please see if you can see the sensor value, e.g. cat /sys/bus/i2c/devices/4-0068/iio:device0/in_anglvel_x_raw cat /sys/bus/i2c/devices/4-0068/iio…

I recently started the device up again, and now the issue persists.

Not sure what have you done before. Maybe u You can check the sensor driver and app log

Please see if you can see the sensor value, e.g. cat /sys/bus/i2c/devices/4-0068/iio:device0/in_anglvel_x_raw cat /sys/bus/i2c/devices/4-0068/iio:device0/in_temp_raw For the app log, you can see in “logread -f”

for temp i get the value of 2095

In the log I just posted, I noticed that the message “Push to AirVantage failed” appears frequently. Is there some way to fix that?

Please see if you can see the sensor value, e.g. cat /sys/bus/i2c/devices/4-0068/iio:device0/in_anglvel_x_raw cat /sys/bus/i2c/devices/4-0068/iio:device0/in_temp_raw

Did you register the module in avms website? you need to type AT+WDSS=1,1 in /dev/ttyAT to connect to Airvantage server.

MangOH Red Not Transmitting

mangOH Red

alexmanak March 17, 2020, 11:14pm 5

How do I check the sensor driver and app log?

How to test sensors in redmangoH

Topic		Replies	Views
MangOH red - Getting Started - Updates only on "Start" of redCloud mangOH Red	17	713	June 15, 2020
Unable to connect to AirVantage with mangOH Red WP7608 mangOH Red	0	459	October 1, 2019
Air Vantage issues mangOH Red	33	1423	January 15, 2020
Can't Connect to AirVantage mangOH Red	15	649	January 15, 2020
Red Sensor to Cloud mangOH Red	15	703	September 11, 2020

MangOH Red Not Transmitting

Related topics