Hi, I got my new mangOH Red WP7608 boards last week. We need to get the mangOH running as a server on a known TCP or a HTTP port to receive data from an exernal Wi-Fi Client. We dont want to add any other wifi router to bring them into a network, since the participants in the network are only thes…

[image] Madan: MT7967 Flash tool is not running on the VM for some reason. Here is the command failure → mangoh@mangoh-vm:~/mt76x7-flash-tool-64_1.0.5$ ./mt76x7-flash-tool This application failed to start because it could not find or load the Qt platform plugin “xcb”. Reinstalling the applic…

The board was already flashed with WP76xx_Release9_GENERIC_EXE. So I guess it would have had latest firmware to run wifi.

I tried to connect from the console port. luckily console port works. “ifconfig” gives me the output below. I am seeing 2 additional network adapters - probably because of executing the “wifiWebAp” tool earlier. How can I reset them, to get back to original state? root@swi-mdm9x28:~# ifconfig i…

@fgodfrey @asyal can someone help me on this please? The board is flashed with Firmware 9 release. I used the wifiWebAp application to set the device in AP mode. However, it did not work. I mean I could get the AP on any client devices. I turned the device off and left. When I powered it again, I …

cm info Device: WP7608 IMEI: 352913090103282 IMEISV: 4 FSN: XG814285220710 Firmware Version: SWI9X07Y_02.16.02.00 000000 jenkins 2018/04/19 19:59:02 Bootloader Version: SWI9…

[image] Madan: Should I really have to do MT7697 firmware upload because I already flashed the device with Release 9. The WiFi chipset does not get programmed when you flash the board - it’s a separate flash. So, yes, you need to follow the procedure. I assume at some point, they’ll have it…

Hey Kim, Thanks for your note. I have tried deleting the /etc/dnsmasq.d/dnsmasq.wlan.conf and rebooting. Unfortunately, it did not bring up the CF3 USB IP address. Thanks anyways.

Thanks Godfrey. Yes, I did suspect that there could be some conflict with DHCP and the USB fake IP assignment. As you suggested, I have assigned a 192.168.2.1. THAT WORKED. Now, I am able to connect to 192.168.2.2. and even can do SSH into it. I tried now again to reflash the firmware. It was suc…

Hi I tried building LinkIt_SDK_V4.3.0_public. I am getting this build failure error. Any ideas why this build is failing? GCC tools are available in ~/LinkIt_SDK_V4.3.0_public/tools/gcc/gcc-arm-none-eabi/arm-none-eabi/bin/. Build… syscalls.o FAIL Build… lzma_decode_interface.o Build… lzma_decod…

Do the various logs have any useful clues? My build area has these logs: ./out/linkit7697_hdk/MT7697_WiFi_BT_fw/log ./out/linkit7697_hdk/MT7697_WiFi_BT_fw/log/build_time.log ./out/linkit7697_hdk/MT7697_WiFi_BT_fw/log/err.log ./out/linkit7697_hdk/MT7697_WiFi_BT_fw/log/build.log

mangOH Red lost 192.168.2.2 IP & MT7697 Setup

mangOH Red

Kim August 3, 2018, 12:24am 6

Hello Madan,

See this post : Brand new WP7603 working, reboot and inaccessible via ssh

This might be the same problem that I had.

Have a nice one

Topic		Replies	Views
[SOLVED] MediaTek wifi , wlan1, not starting properly	10	2204	July 31, 2018
Uses TI module instead of MT7697 mangOH Red	16	903	December 15, 2020
MangOH RED 77 - Wifi Client config mangOH Red	10	941	August 4, 2020
MangOH Red [wp76xx] with Talon Mirage IoT [wl18xx] mangOH Red	15	1520	February 24, 2021
Using WiFi on mangOH Red + wp76xx running Legato 19.02 AF mangOH Red	9	1909	July 8, 2021

mangOH Red lost 192.168.2.2 IP & MT7697 Setup

Related topics