# MangOH not Connecting to Mobile with Micro SIM

**URL:** https://mangoh.discourse.group/t/mangoh-not-connecting-to-mobile-with-micro-sim/740
**Category:** mangOH Green
**Created:** [September 19, 2017, 3:34pm UTC](https://mangoh.discourse.group/t/mangoh-not-connecting-to-mobile-with-micro-sim/740 "2017-09-19T15:34:47Z")
**Posts on this page:** 3
**Page:** 1

<div class="post-metadata">

### Author: ![PGKevin](https://avatars.discourse-cdn.com/v4/letter/p/e95f7d/32.png) [@PGKevin](https://mangoh.discourse.group/u/PGKevin)
#### Post date: [September 19, 2017, 3:34pm UTC](https://mangoh.discourse.group/t/mangoh-not-connecting-to-mobile-with-micro-sim/740/1 "2017-09-19T15:34:47Z")

</div>

Hi everyone. Apologies in advance if this is a novice question, but I’ve been racking my brain on this a while.

I have the mangOH Green kit with a Sierra Wireless WP7504 chip attached running a Legato toolchain. I also have an activated Micro SIM card which I can’t seem to get working with the mangOH.

The SIM is new and has been activated with the carrier. I’ve inserted the Micro SIM into the Micro SIM/Micro SD combination slot (the bottom rung), and the main antenna is attached (confirmed as running “cm radio” indicates a signal strength).

The following information is output when running “cm radio”:

Power: ON  
Current Network Operator: (blank)  
RAT: UMTS network (LE\_MRC\_RAT\_UMTS)  
Status: Not registered but currently searching for a new operator (LE\_MRC\_REG\_SEARCHING)  
Signal: Good signal strength (3)  
PS: Packet Switched Not registered (LE\_MRC\_REG\_NONE)

As indicated, the radio is turned on, as well. To verify, running “cm radio on” outputs “Radio power is already set to ON.”

Is there some way I need to tell my mangOH board to read from the Micro SIM slot as opposed to the primary, Mini SIM slot, or something along those lines? I can’t seem to find a solution either way.

Thank you very much in advance, I greatly appreciate any assistance!

---

<div class="post-metadata">

### Author: ![PGKevin](https://avatars.discourse-cdn.com/v4/letter/p/e95f7d/32.png) [@PGKevin](https://mangoh.discourse.group/u/PGKevin)
#### Post date: [September 19, 2017, 4:18pm UTC](https://mangoh.discourse.group/t/mangoh-not-connecting-to-mobile-with-micro-sim/740/2 "2017-09-19T16:18:12Z")

</div>

Update: I managed to fix the problem by using a Micro SIM to Mini SIM adapter and using the primary Mini SIM slot instead. If anyone else has this problem, that’s probably the easiest solution.

---

<div class="post-metadata">

### Author: ![dfrey](https://sea2.discourse-cdn.com/flex016/user_avatar/mangoh.discourse.group/dfrey/32/303_2.png) [@dfrey](https://mangoh.discourse.group/u/dfrey)
#### Post date: [September 19, 2017, 8:05pm UTC](https://mangoh.discourse.group/t/mangoh-not-connecting-to-mobile-with-micro-sim/740/3 "2017-09-19T20:05:47Z")

</div>

To switch between the SIM slots, you can do:

`cm sim select EXTERNAL_SLOT_1`  
or  
`cm sim select EXTERNAL_SLOT_2`
