# Issue Connecting to MangOH green starter development kit **URL:** \ **Category:** mangOH Green\ **Created:** [March 8, 2018, 2:15am UTC](https://mangoh.discourse.group/t/issue-connecting-to-mangoh-green-starter-development-kit/1224 "2018-03-08T02:15:58Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![hposhtiw](https://avatars.discourse-cdn.com/v4/letter/h/a88e4f/32.png) [@hposhtiw](https://mangoh.discourse.group/u/hposhtiw)\ **Post date:** [March 8, 2018, 2:15am UTC](https://mangoh.discourse.group/t/issue-connecting-to-mangoh-green-starter-development-kit/1224/1 "2018-03-08T02:15:58Z")
I just bought the MangOH green starter development kit. [Digikey MangOH green AirPrime® WP Series Development Kit](https://www.digikey.com/catalog/en/partgroup/airprime-wp-series-development-kit/65242?mpart=WP%20DEV%20KIT_6000656&vendor=1645) I haven’t got the WP module yet. It is in the process. I was thinking to get started with the board and see If I can load program, play with GPIO and so on. However, I am not able to connect to the board either via Ethernet cable (one end connected to the board and the other connected to my laptop) or via USB-Ethernet converter connected to kit at one end and other end of the Ethernet connected my laptop. I tried IP 192.168.2.2 but I can’t SSH from my windows machine. I can’t even get successful ping responses from 192.168.2.2. The board is powered with external power supply and the power LED is green, there are no other LEDs on. Do I must wait for WP module? or I am missing something very basic. ---
**Author:** ![asyal](https://sea2.discourse-cdn.com/flex016/user_avatar/mangoh.discourse.group/asyal/32/78_2.png) [@asyal](https://mangoh.discourse.group/u/asyal)\ **Post date:** [March 8, 2018, 3:32am UTC](https://mangoh.discourse.group/t/issue-connecting-to-mangoh-green-starter-development-kit/1224/2 "2018-03-08T03:32:58Z")
You cant do anything without the module. ---
**Author:** ![hposhtiw](https://avatars.discourse-cdn.com/v4/letter/h/a88e4f/32.png) [@hposhtiw](https://mangoh.discourse.group/u/hposhtiw)\ **Post date:** [March 30, 2018, 3:01am UTC](https://mangoh.discourse.group/t/issue-connecting-to-mangoh-green-starter-development-kit/1224/3 "2018-03-30T03:01:35Z")
Hi, I got the module, I installed it. However, I am clueless about how to talk to it. I don’t have A SIM card but , I thought I will be able to login to the module over SSH using 192.168.2.2 but I can’t ping that either. I found the instructions below to upgrade the firmware of the module. [https://source.sierrawireless.com/resources/legato/drivers-for-wp75xx\_wp76xx\_wp8548-series-modules---build-4773/](https://source.sierrawireless.com/resources/legato/drivers-for-wp75xx_wp76xx_wp8548-series-modules---build-4773/) I installed the exe but It doesn’t do anything after installtion. I also found the instruction where it talks about downloading driver [http://mangoh.io/uploaded-documents/Reference/mangOH%20Green/Discover/Hardware%20User%20Guide/mangOH%20Dev%20Kit%20User%20Guide%20-%20HTML5-Responsive%20HTML5/#t=mangOH\_Dev\_Kit\_User\_Guide\_-\_HTML5%2FSoftware%2FSoftware.htm](http://mangoh.io/uploaded-documents/Reference/mangOH%20Green/Discover/Hardware%20User%20Guide/mangOH%20Dev%20Kit%20User%20Guide%20-%20HTML5-Responsive%20HTML5/#t=mangOH_Dev_Kit_User_Guide_-_HTML5%2FSoftware%2FSoftware.htm) I don’t get where do I connect USB? is it USB male to male connector I have to connect the Dev kit to my windows machine? I even tried connecting my router’s Ethernet cable to the KIT, but I don’t see any LED on the Ethernet port on either side. ![39](https://us1.discourse-cdn.com/flex016/uploads/mangoh/original/1X/18ab5bd8ef81d75fe2c6442ee3e840b8d28e3e93.png) This is very basic, my sincere apologies for bugging on this. But, I am stuck. If you could provide me information about each step to get started that would be really appreciated.