# Firmware downgrade after crash WP8548

**URL:** <https://mangoh.discourse.group/t/firmware-downgrade-after-crash-wp8548/1805>\
**Category:** mangOH Red\
**Created:** [August 7, 2018, 8:28am UTC](https://mangoh.discourse.group/t/firmware-downgrade-after-crash-wp8548/1805 "2018-08-07T08:28:50Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Louis96](https://avatars.discourse-cdn.com/v4/letter/l/4da419/32.png) [@Louis96](https://mangoh.discourse.group/u/Louis96)\
**Post date:** [August 7, 2018, 8:28am UTC](https://mangoh.discourse.group/t/firmware-downgrade-after-crash-wp8548/1805/1 "2018-08-07T08:28:50Z")

</div>

Hello,

I was trying to stop some apps that were preloaded on the card, and the mangOH red crashed :

- I was disconnected of the ssh mode of the mangOH red .

- I noticed that all the apps I had installed previously disappeared ( thanks to an _app status_ command )

- the firmware of the module WP8548 downgraded from SWI9X15Y\_07.12.14.00 to SWI9X15Y\_07.12.09.00

- Also the mangOH card and the WP8548 module were overheating before the crash

Is it normal that the firmware downgrades when there is a crash ?

Thank in advance

Louis

---

<div class="post-metadata">

**Author:** ![Akshaysk](https://avatars.discourse-cdn.com/v4/letter/a/5f8ce5/32.png) [@Akshaysk](https://mangoh.discourse.group/u/Akshaysk)\
**Post date:** [October 16, 2019, 5:15am UTC](https://mangoh.discourse.group/t/firmware-downgrade-after-crash-wp8548/1805/2 "2019-10-16T05:15:36Z")

</div>

Hi @Louis96 ,  
Which applications did you stop from running ?

---

<div class="post-metadata">

**Author:** ![dbeckwith](https://sea2.discourse-cdn.com/flex016/user_avatar/mangoh.discourse.group/dbeckwith/32/2139_2.png) [@dbeckwith](https://mangoh.discourse.group/u/dbeckwith)\
**Post date:** [October 22, 2019, 4:24pm UTC](https://mangoh.discourse.group/t/firmware-downgrade-after-crash-wp8548/1805/3 "2019-10-22T16:24:59Z")

</div>

@Louis96 How did you install the apps? Did you use the `update` command or `fwupdate` command? The former command installs as an overlay which can be rolled back to a base image depending on how many restarts occur.
