# Ethernet card - Can I check IP address of connected device if mangoh red is setup as a router
**URL:** https://mangoh.discourse.group/t/ethernet-card-can-i-check-ip-address-of-connected-device-if-mangoh-red-is-setup-as-a-router/5038
**Category:** Uncategorized
**Created:** [August 17, 2020, 5:43pm UTC](https://mangoh.discourse.group/t/ethernet-card-can-i-check-ip-address-of-connected-device-if-mangoh-red-is-setup-as-a-router/5038 "2020-08-17T17:43:55Z")
**Posts on this page:** 2
**Page:** 1
### Author:  [@christopheradams1](https://mangoh.discourse.group/u/christopheradams1)
#### Post date: [August 17, 2020, 5:43pm UTC](https://mangoh.discourse.group/t/ethernet-card-can-i-check-ip-address-of-connected-device-if-mangoh-red-is-setup-as-a-router/5038/1 "2020-08-17T17:43:55Z")
I followed [this](https://mangoh.discourse.group/t/setting-up-mangoh-red-as-router-to-cellular-gateway/1241) tutorial to set up mangoh red as a router , I have a raspberry pi 3 b+ connected via ethernet to my mangoh red ethernet iot card, Is there a way I can check the IP address of the pi from the mangoh red command line (I have ssh’d into the mangoh red). I would like to send a ping from the raspberry pi to the mangoh red.
---
### Author:  [@jyijyi](https://mangoh.discourse.group/u/jyijyi)
#### Post date: [August 17, 2020, 10:31pm UTC](https://mangoh.discourse.group/t/ethernet-card-can-i-check-ip-address-of-connected-device-if-mangoh-red-is-setup-as-a-router/5038/2 "2020-08-17T22:31:35Z")
Maybe you can give a try to ping 192.168.20.10
Configuring the NAT…
Configure DHCP server (Y/n): Y
Enter start IP (default: 192.168.20.10):
IP address (192.168.20.10)
Enter end IP (default: 192.168.20.100):