# ENET-IOT-CARD driver

**URL:** <https://mangoh.discourse.group/t/enet-iot-card-driver/527>\
**Category:** IoT Cards\
**Created:** [May 13, 2017, 2:40pm UTC](https://mangoh.discourse.group/t/enet-iot-card-driver/527 "2017-05-13T14:40:54Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![george2017](https://avatars.discourse-cdn.com/v4/letter/g/ecae2f/32.png) [@george2017](https://mangoh.discourse.group/u/george2017)\
**Post date:** [May 13, 2017, 2:40pm UTC](https://mangoh.discourse.group/t/enet-iot-card-driver/527/1 "2017-05-13T14:40:55Z")

</div>

After installing my ENET IOT card from Element 14, I don’t see it recognized at boot time. Has anyone got this working and have any advice on where to find documentation on the card and info on a driver module.

---

<div class="post-metadata">

**Author:** ![asyal](https://sea2.discourse-cdn.com/flex016/user_avatar/mangoh.discourse.group/asyal/32/78_2.png) [@asyal](https://mangoh.discourse.group/u/asyal)\
**Post date:** [May 15, 2017, 12:12am UTC](https://mangoh.discourse.group/t/enet-iot-card-driver/527/2 "2017-05-15T00:12:18Z")

</div>

Did you bring the card out of reset?

---

<div class="post-metadata">

**Author:** ![george2017](https://avatars.discourse-cdn.com/v4/letter/g/ecae2f/32.png) [@george2017](https://mangoh.discourse.group/u/george2017)\
**Post date:** [May 16, 2017, 4:57am UTC](https://mangoh.discourse.group/t/enet-iot-card-driver/527/3 "2017-05-16T04:57:27Z")

</div>

Can you describe how to do that - or better yet, point me to some documentation?

---

<div class="post-metadata">

**Author:** ![asyal](https://sea2.discourse-cdn.com/flex016/user_avatar/mangoh.discourse.group/asyal/32/78_2.png) [@asyal](https://mangoh.discourse.group/u/asyal)\
**Post date:** [May 16, 2017, 3:56pm UTC](https://mangoh.discourse.group/t/enet-iot-card-driver/527/4 "2017-05-16T15:56:56Z")

</div>

for slot 0, mux 15  
slot 1 , try mux 16  
slot 2 mux 17

We will do a video tutorial and release it in the next couple of weeks.

---

<div class="post-metadata">

**Author:** ![Isabel](https://avatars.discourse-cdn.com/v4/letter/i/977dab/32.png) [@Isabel](https://mangoh.discourse.group/u/Isabel)\
**Post date:** [June 28, 2017, 3:03pm UTC](https://mangoh.discourse.group/t/enet-iot-card-driver/527/5 "2017-06-28T15:03:04Z")

</div>

Hello

I have a FX30S with IOT Ethernet card . Is the Ethernet card automatically detected or how must be the set up? Is the video tutorial ready?

Thank you

---

<div class="post-metadata">

**Author:** ![dfrey](https://sea2.discourse-cdn.com/flex016/user_avatar/mangoh.discourse.group/dfrey/32/303_2.png) [@dfrey](https://mangoh.discourse.group/u/dfrey)\
**Post date:** [June 29, 2017, 12:19am UTC](https://mangoh.discourse.group/t/enet-iot-card-driver/527/6 "2017-06-29T00:19:09Z")

</div>

I believe the ethernet IoT card will automatically show up without any configuration because it’s USB based. You _may_ have to take the IoT slot out of reset though. I’m not really familiar with the FX30 so I don’t know which IO is connected to the IoT slot reset pin and thus I can’t say how to control it.

This information _should_ be in the FX30S user guide on page 58 under the table `IoT Connector Interface`, but it’s missing. I dug around a bit in some internal documents and it seems like it _might_ be connected to GPIO6. So you could try this to take it out of reset:

`echo 6 > /sys/class/gpio/export echo out > /sys/class/gpio/gpio6/direction echo 1 > /sys/class/gpio/gpio6/value`