# Disable sleep clock WP7702

**URL:** <https://mangoh.discourse.group/t/disable-sleep-clock-wp7702/10337>\
**Category:** mangOH Red\
**Created:** [September 5, 2023, 1:28pm UTC](https://mangoh.discourse.group/t/disable-sleep-clock-wp7702/10337 "2023-09-05T13:28:22Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![jyijyi](https://sea2.discourse-cdn.com/flex016/user_avatar/mangoh.discourse.group/jyijyi/32/997_2.png) [@jyijyi](https://mangoh.discourse.group/u/jyijyi)\
**Post date:** [September 5, 2023, 2:49pm UTC](https://mangoh.discourse.group/t/disable-sleep-clock-wp7702/10337/2 "2023-09-05T14:49:00Z")

</div>

here says:

`pin 23 generates a 32KHz square wave while the unit is powered, it is available as long as the unit is in ULPM (so effectively off)`

> [@How to generate 32KHz sleep clock](https://mangoh.discourse.group/t/how-to-generate-32khz-sleep-clock/5755/3):
>
> @markfisher So pin 23 generates a 32KHz square wave while the unit is powered, it is available as long as the unit is in ULPM (so effectively off). So if you are using the unit in sleep mode (at+ksleep) it will still be there, the USB\_SS is not really a ‘mode’ of the unit as this just applies to the USB bus, not the unit as a whole. If you don’t have USB connected (like I have tested it with) then USB is not part of the discussion. Does that answer the question? Regards Matt

BTW, do you see this 32K clock when module is in active mode?

---

_[View the full topic](https://mangoh.discourse.group/t/disable-sleep-clock-wp7702/10337)._