CAN-bus read and filter

[Francis.duhaut]

Look my reply on this topic :

CAN IoT Card driver

Finally, saw the can0 line with ifconfig command after all those steps: echo 2 > /sys/class/gpio/export echo out > /sys/class/gpio/gpio2/direction echo 1 > /sys/class/gpio/gpio2/value // Enable level shifter on the CAN IoT card echo 13 > /sys/class/gpio/export echo out > /sys/class/gpio/gpio13/direction echo 1 > /sys/class/gpio/gpio13/value modprobe can modprobe can-dev modprobe can-raw modprobe mcp251x ip link set can0 type can bitrate 125000 triple-sampling on ifconfig can0 up …