# Bringup of TI Talon \[wl18xx\] wifi IOT module on WP7607 Custom Board

**URL:** <https://mangoh.discourse.group/t/bringup-of-ti-talon-wl18xx-wifi-iot-module-on-wp7607-custom-board/5003>\
**Category:** IoT Cards\
**Created:** [August 11, 2020, 7:17am UTC](https://mangoh.discourse.group/t/bringup-of-ti-talon-wl18xx-wifi-iot-module-on-wp7607-custom-board/5003 "2020-08-11T07:17:18Z")\
**Posts on this page:** 1\
**Showing post:** 16

<div class="post-metadata">

**Author:** ![jyijyi](https://sea2.discourse-cdn.com/flex016/user_avatar/mangoh.discourse.group/jyijyi/32/997_2.png) [@jyijyi](https://mangoh.discourse.group/u/jyijyi)\
**Post date:** [August 12, 2020, 8:42am UTC](https://mangoh.discourse.group/t/bringup-of-ti-talon-wl18xx-wifi-iot-module-on-wp7607-custom-board/5003/16 "2020-08-12T08:42:45Z")

</div>

If you confirmed the mangoh red board is using 3V SDIO bus, you might try the same at your custom board.

---

_[View the full topic](https://mangoh.discourse.group/t/bringup-of-ti-talon-wl18xx-wifi-iot-module-on-wp7607-custom-board/5003)._