# Bluetooth Command

**URL:** <https://mangoh.discourse.group/t/bluetooth-command/1182>\
**Category:** mangOH Red\
**Created:** [February 19, 2018, 4:58pm UTC](https://mangoh.discourse.group/t/bluetooth-command/1182 "2018-02-19T16:58:29Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Souhail](https://avatars.discourse-cdn.com/v4/letter/s/a698b9/32.png) [@Souhail](https://mangoh.discourse.group/u/Souhail)\
**Post date:** [February 19, 2018, 4:58pm UTC](https://mangoh.discourse.group/t/bluetooth-command/1182/1 "2018-02-19T16:58:29Z")

</div>

Hello,

Any one could help me with the Bluetooth IOT module installed on a mangoh red dev board. I made some modifications to the bt-cfg.sh in order to define the right GPIO used to reset and enable the bluetooth Module. Then, I installed bluetoothUtil api. Now, I would like to make a scan of the bluetooth devices. Is there a command like wifi client scan that I could run it !!! Thank you.