# AT cmds for Mirage Talon from MangoH Red board AT port **URL:** \ **Category:** mangOH Red\ **Created:** [July 9, 2020, 10:13am UTC](https://mangoh.discourse.group/t/at-cmds-for-mirage-talon-from-mangoh-red-board-at-port/4803 "2020-07-09T10:13:21Z")\ **Posts on this page:** 1\ **Showing post:** 74
**Author:** ![jyijyi](https://sea2.discourse-cdn.com/flex016/user_avatar/mangoh.discourse.group/jyijyi/32/997_2.png) [@jyijyi](https://mangoh.discourse.group/u/jyijyi)\ **Post date:** [November 12, 2020, 2:30am UTC](https://mangoh.discourse.group/t/at-cmds-for-mirage-talon-from-mangoh-red-board-at-port/4803/74 "2020-11-12T02:30:37Z")
I don’t see problem, please see the log below: * * * root@swi-mdm9x28-wp:~# wifi client start successfully called start. root@swi-mdm9x28-wp:~# root@swi-mdm9x28-wp:~# cm info Device: WP7605 IMEI: 353532100020465 IMEISV: 6 FSN: 2A917285070404 Firmware Version: SWI9X07Y\_02.28.03.05 000000 jenkins 2019/07/08 11:04:16 Bootloader Version: SWI9X07Y\_02.28.03.05 000000 jenkins 2019/07/08 11:04:16 MCU Version: PRI Part Number (PN): 9908705 PRI Revision: 002.006 Carrier PRI Name: SIERRA Carrier PRI Revision: 001.032\_000 SKU: 1104208 Last Reset Cause: Power Down Resets Count: Expected: 44 Unexpected: 0 root@swi-mdm9x28-wp:~# root@swi-mdm9x28-wp:~# wifi client scan starting scan. Found: SSID: “SWI-MOBILE” BSSID: “94:b4:0f:b9:04:61” Strength:-67 Ref:0x10000003 Found: SSID: “” BSSID: “94:b4:0f:d2:47:63” Strength:-71 Ref:0x1000000b Found: SSID: “SWI-WLAN” BSSID: “94:b4:0f:b9:04:60” Strength:-64 Ref:0x10000001 Found: SSID: “SWI-MOBILE” BSSID: “94:b4:0f:d2:47:61” Strength:-71 Ref:0x10000009 Found: SSID: “SWI-GUEST” BSSID: “94:b4:0f:b8:fa:22” Strength:-57 Ref:0x10000011 Found: SSID: “SWI-WLAN” BSSID: “94:b4:0f:d2:47:60” Strength:-71 Ref:0x10000007 Found: SSID: “” BSSID: “94:b4:0f:b8:fa:23” Strength:-56 Ref:0x10000013 Found: SSID: “SWI-MOBILE” BSSID: “94:b4:0f:b8:fa:21” Strength:-57 Ref:0x1000000f Found: SSID: “SWI-GUEST” BSSID: “94:b4:0f:b9:04:62” Strength:-67 Ref:0x10000005 Found: SSID: “SWI-WLAN” BSSID: “94:b4:0f:b8:fa:20” Strength:-57 Ref:0x1000000d root@swi-mdm9x28-wp:~# root@swi-mdm9x28-wp:~# ^C root@swi-mdm9x28-wp:~# wifi client setsecurityproto 0x10000003 3 Successfully set security protocol. root@swi-mdm9x28-wp:~# root@swi-mdm9x28-wp:~# wifi client setpassphrase 0x10000003 password Successfully set passphrase. root@swi-mdm9x28-wp:~# root@swi-mdm9x28-wp:~# root@swi-mdm9x28-wp:~# root@swi-mdm9x28-wp:~# wifi client connect 0x10000003 Connecting… CONNECTED. root@swi-mdm9x28-wp:~# root@swi-mdm9x28-wp:~# ifconfig wlan0 wlan0 Link encap:Ethernet HWaddr D0:B5:C2:F1:F5:5B inet6 addr: fe80::d2b5:c2ff:fef1:f55b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:364 (364.0 B) TX bytes:888 (888.0 B) root@swi-mdm9x28-wp:~# root@swi-mdm9x28-wp:~# app status [running] atAirVantage [running] atQmiLinker [running] atService [running] audioService [running] avcService [running] cellNetService [running] dataConnectionService [running] fwupdateService [running] gpioService [running] modemService [running] portService [running] positioningService [running] powerMgr [running] qmiAirVantage [running] secStore [stopped] smsInboxService [stopped] spiService [stopped] tools [stopped] voiceCallService [stopped] wifi [stopped] wifiApTest [stopped] wifiClientTest [running] wifiService [stopped] wifiWebAp [stopped] hello6 root@swi-mdm9x28-wp:~# root@swi-mdm9x28-wp:~# app start hello6 root@swi-mdm9x28-wp:~# root@swi-mdm9x28-wp:~# ifconfig wlan0 wlan0 Link encap:Ethernet HWaddr D0:B5:C2:F1:F5:5B inet addr:192.168.23.251 Bcast:192.168.23.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:51 errors:0 dropped:0 overruns:0 frame:0 TX packets:14 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4106 (4.0 KiB) TX bytes:2556 (2.4 KiB) Nov 12 10:26:49 | hello6[3949]/hello6\_exe T=main | \_main.c main() 62 | == Starting Event Processing Loop == Nov 12 10:26:49 | hello6[3949]/hello6Component T=main | hello6Component.c \_hello6Component\_COMPONENT\_INIT() 9 | Hello, world. Nov 12 10:26:49 | hello6[3949] | | udhcpc: started, v1.27.2 Nov 12 10:26:49 | hello6[3949] | | udhcpc: sending discover Nov 12 10:26:52 | hello6[3949] | | udhcpc: sending discover Nov 12 10:26:55 | hello6[3949] | | udhcpc: sending discover Nov 12 10:26:56 | hello6[3949] | | udhcpc: sending select for 192.168.23.251 Nov 12 10:26:56 | hello6[3949] | | udhcpc: lease of 192.168.23.251 obtained, lease time 86400 Nov 12 10:26:56 | hello6[3949] | | /etc/udhcpc.d/50default: Adding DNS 8.8.8.8 * * * Attached hello6.rar is the application I am using. [hello6.rar](https://mangoh.discourse.group/uploads/short-url/v1okskKgyc9XNT1ePtP9GZJLwr0.rar) (287.2 KB) --- _[View the full topic](https://mangoh.discourse.group/t/at-cmds-for-mirage-talon-from-mangoh-red-board-at-port/4803)._