# AT cmds for Mirage Talon from MangoH Red board AT port

**URL:** <https://mangoh.discourse.group/t/at-cmds-for-mirage-talon-from-mangoh-red-board-at-port/4803>\
**Category:** mangOH Red\
**Created:** [July 9, 2020, 10:13am UTC](https://mangoh.discourse.group/t/at-cmds-for-mirage-talon-from-mangoh-red-board-at-port/4803 "2020-07-09T10:13:21Z")\
**Posts on this page:** 1\
**Showing post:** 17

<div class="post-metadata">

**Author:** ![jyijyi](https://sea2.discourse-cdn.com/flex016/user_avatar/mangoh.discourse.group/jyijyi/32/997_2.png) [@jyijyi](https://mangoh.discourse.group/u/jyijyi)\
**Post date:** [July 27, 2020, 9:04am UTC](https://mangoh.discourse.group/t/at-cmds-for-mirage-talon-from-mangoh-red-board-at-port/4803/17 "2020-07-27T09:04:12Z")

</div>

You can use my attached application as reference.  
Steps:

1. enter the following AT commands in AT command port:  
AT!ENTERCND=“A710”  
AT!USBCOMP=1,1,8014D  
at!RESET

2. compile and download the application

3. in console type the following:  
app runProc atServerIntegrationTest --exe=atServerTest – tty /dev/ttyGS1

4. 

in the new raw data port (check in device manager), type ATE1, you should see the following response:

* * *

E TYPE: PARA  
E PARAM 0: 1

OK

* * *

1. 

at+bridge=“OPEN”

+BRIDGE TYPE: PARA  
+BRIDGE PARAM 0: OPEN

OK  
at+bridge=“ADD”

+BRIDGE TYPE: PARA  
+BRIDGE PARAM 0: ADD

OK  
ati3

Manufacturer: Sierra Wireless, Incorporated  
Model: WP7607-1  
Revision: SWI9X07Y\_02.28.03.03 000000 jenkins 2019/05/21 03:33:04  
IMEI: 359780080500170  
IMEI SV: 6  
FSN: V2842570321010  
+GCAP: +CGSM

OK  
AT+KHTTPCFG=0,“116.66.221.43”,80,1

+KHTTPCFG PARAM 0: 0  
+KHTTPCFG PARAM 1: 116.66.221.43  
+KHTTPCFG PARAM 2: 80  
+KHTTPCFG PARAM 3: 1

OK  
[UART\_KHTTP\_Demo1.rar](https://mangoh.discourse.group/uploads/short-url/m2Bk2SUUJMYwwND2GRIbG5taH3s.rar) (405.8 KB)

---

_[View the full topic](https://mangoh.discourse.group/t/at-cmds-for-mirage-talon-from-mangoh-red-board-at-port/4803)._