# AT cmds for Mirage Talon from MangoH Red board AT port **URL:** \ **Category:** mangOH Red\ **Created:** [July 9, 2020, 10:13am UTC](https://mangoh.discourse.group/t/at-cmds-for-mirage-talon-from-mangoh-red-board-at-port/4803 "2020-07-09T10:13:21Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![tejaswisj](https://avatars.discourse-cdn.com/v4/letter/t/ee7513/32.png) [@tejaswisj](https://mangoh.discourse.group/u/tejaswisj)\ **Post date:** [July 9, 2020, 10:13am UTC](https://mangoh.discourse.group/t/at-cmds-for-mirage-talon-from-mangoh-red-board-at-port/4803/1 "2020-07-09T10:13:21Z")
Hi, Are there any AT commands which can initiate the Mirage Talon Wifi IOT card from the MangoH Red Board AT cmd port ? There was a similar AT cmd doc for BX310x which helps initiate Wifi client. Is there any doc for Mirage Talon Wifi IOT card ? ---
**Author:** ![jyijyi](https://sea2.discourse-cdn.com/flex016/user_avatar/mangoh.discourse.group/jyijyi/32/997_2.png) [@jyijyi](https://mangoh.discourse.group/u/jyijyi)\ **Post date:** [July 9, 2020, 11:01am UTC](https://mangoh.discourse.group/t/at-cmds-for-mirage-talon-from-mangoh-red-board-at-port/4803/3 "2020-07-09T11:01:07Z")
You need to write a legato application which will create a custom AT command server so that when you enter some custom AT command, the application can call wifi to start. You can see the following example: > **[legatoproject/legato-af](https://github.com/legatoproject/legato-af/tree/master/apps/test/atServices/atServerIntegrationTest)** > > Legato Application Framework. Contribute to legatoproject/legato-af development by creating an account on GitHub. ---
**Author:** ![tejaswisj](https://avatars.discourse-cdn.com/v4/letter/t/ee7513/32.png) [@tejaswisj](https://mangoh.discourse.group/u/tejaswisj)\ **Post date:** [July 10, 2020, 10:06am UTC](https://mangoh.discourse.group/t/at-cmds-for-mirage-talon-from-mangoh-red-board-at-port/4803/4 "2020-07-10T10:06:53Z")
thanks. Tried building on the 19.02 legato the default app to check on building steps. Tried the below step. Got le\_mcc.api file not found. Is there some steps missed ? tjayaprakash@IM-RT-SR-002:~/wp/legato-19.02.0$ mkapp -t wp76 apps/test/atServices/atServerIntegrationTest/atServerIntegrationTest.adef \*\* ERROR: /home/tjayaprakash/wp/legato-19.02.0/apps/test/atServices/atServerIntegrationTest/atServerTestComp/Component.cdef:6:8: error: Couldn’t find file ‘le\_mcc.api.’ tjayaprakash@IM-RT-SR-002:~/wp/legato-19.02.0$ ---
**Author:** ![jyijyi](https://sea2.discourse-cdn.com/flex016/user_avatar/mangoh.discourse.group/jyijyi/32/997_2.png) [@jyijyi](https://mangoh.discourse.group/u/jyijyi)\ **Post date:** [July 10, 2020, 2:10pm UTC](https://mangoh.discourse.group/t/at-cmds-for-mirage-talon-from-mangoh-red-board-at-port/4803/5 "2020-07-10T14:10:58Z")
Suggest you importing the test application to developer studio to compile. I remember it works on my pc. ---
**Author:** ![natanb](https://avatars.discourse-cdn.com/v4/letter/n/45deac/32.png) [@natanb](https://mangoh.discourse.group/u/natanb)\ **Post date:** [July 13, 2020, 12:32pm UTC](https://mangoh.discourse.group/t/at-cmds-for-mirage-talon-from-mangoh-red-board-at-port/4803/6 "2020-07-13T12:32:36Z")
//from terminal you can run the following //to initiate a wlon0 /sbin/ifup wlan0 //to scan /usr/sbin/iw dev wlan0 scan if you want it on you code use system() and/or popen() It works ---
**Author:** ![jyijyi](https://sea2.discourse-cdn.com/flex016/user_avatar/mangoh.discourse.group/jyijyi/32/997_2.png) [@jyijyi](https://mangoh.discourse.group/u/jyijyi)\ **Post date:** [July 14, 2020, 6:49am UTC](https://mangoh.discourse.group/t/at-cmds-for-mirage-talon-from-mangoh-red-board-at-port/4803/7 "2020-07-14T06:49:04Z")
> [@tejaswisj](#): > > mkapp -t wp76 Another way is to use the following command: mkapp -t wp76xx -o Target\_Legato\_Debug -w Target\_Legato\_Debug -i “/home/owner/legato/packages/legato.framework.19.2.0.wp76xx-201906171244/resources/legato/interfaces/modemServices” atServerIntegrationTest.adef ---
**Author:** ![tejaswisj](https://avatars.discourse-cdn.com/v4/letter/t/ee7513/32.png) [@tejaswisj](https://mangoh.discourse.group/u/tejaswisj)\ **Post date:** [July 27, 2020, 4:54am UTC](https://mangoh.discourse.group/t/at-cmds-for-mirage-talon-from-mangoh-red-board-at-port/4803/8 "2020-07-27T04:54:05Z")
Was able to succesfully build & install the default application on MangoH red board. Started the app, root@swi-mdm9x28-wp:~# app start atServerIntegrationTest root@swi-mdm9x28-wp:~# app status [running] atAirVantage [running] atQmiLinker [running] atService [running] audioService [running] avcService [running] cellNetService [running] dataConnectionService [running] atServerIntegrationTest Tried to run the sample at cmnd “AT+test” in the default at port. But gave error. AT OK at+test ERROR i guess i am doign something wrong here. ---
**Author:** ![jyijyi](https://sea2.discourse-cdn.com/flex016/user_avatar/mangoh.discourse.group/jyijyi/32/997_2.png) [@jyijyi](https://mangoh.discourse.group/u/jyijyi)\ **Post date:** [July 27, 2020, 5:14am UTC](https://mangoh.discourse.group/t/at-cmds-for-mirage-talon-from-mangoh-red-board-at-port/4803/9 "2020-07-27T05:14:01Z")
It is not using the default AT port, instead you need to enter AT!mapuart=17,1 to set UART1 to be data mode. After module reboots, type the following in console: app runProc atServerIntegrationTest --exe=atServerTest – tty /dev/ttyHS0 Now you can enter those AT commands in UART1. ---
**Author:** ![tejaswisj](https://avatars.discourse-cdn.com/v4/letter/t/ee7513/32.png) [@tejaswisj](https://mangoh.discourse.group/u/tejaswisj)\ **Post date:** [July 27, 2020, 5:26am UTC](https://mangoh.discourse.group/t/at-cmds-for-mirage-talon-from-mangoh-red-board-at-port/4803/10 "2020-07-27T05:26:24Z")
If the UART1 port setting is changed to 17,1 will the default AT commands work ? Also will there be any changes to the board? We want it to work for modem as well as try to add new at commands. Also, can the AT!mapuart settings be changed or reverted to original? Currently, AT!MAPUART? !MAPUART: 1,16 OK at!mapuart=? !MAPUART: (0-17),(1-2) OK at!mapuart? !MAPUART: 1,16 ---
**Author:** ![jyijyi](https://sea2.discourse-cdn.com/flex016/user_avatar/mangoh.discourse.group/jyijyi/32/997_2.png) [@jyijyi](https://mangoh.discourse.group/u/jyijyi)\ **Post date:** [July 27, 2020, 5:40am UTC](https://mangoh.discourse.group/t/at-cmds-for-mirage-talon-from-mangoh-red-board-at-port/4803/11 "2020-07-27T05:40:02Z")
No, this application will not make any change on USB modem port. (i.e. AT+TEST will not work on USB modem port) ---
**Author:** ![tejaswisj](https://avatars.discourse-cdn.com/v4/letter/t/ee7513/32.png) [@tejaswisj](https://mangoh.discourse.group/u/tejaswisj)\ **Post date:** [July 27, 2020, 6:27am UTC](https://mangoh.discourse.group/t/at-cmds-for-mirage-talon-from-mangoh-red-board-at-port/4803/12 "2020-07-27T06:27:01Z")
i changed the setting of at!mapuart as suggested, but it is setting to 17,16 after reboot. Something wrong in setting it? at!mapuart=17,1 OK at!mapuart? !MAPUART: 17,16 OK ---
**Author:** ![jyijyi](https://sea2.discourse-cdn.com/flex016/user_avatar/mangoh.discourse.group/jyijyi/32/997_2.png) [@jyijyi](https://mangoh.discourse.group/u/jyijyi)\ **Post date:** [July 27, 2020, 6:39am UTC](https://mangoh.discourse.group/t/at-cmds-for-mirage-talon-from-mangoh-red-board-at-port/4803/13 "2020-07-27T06:39:15Z")
please read the AT command guide, when you do AT!MAPUART?, 17 is for UART1 and 16 is for UART2 ---
**Author:** ![tejaswisj](https://avatars.discourse-cdn.com/v4/letter/t/ee7513/32.png) [@tejaswisj](https://mangoh.discourse.group/u/tejaswisj)\ **Post date:** [July 27, 2020, 6:51am UTC](https://mangoh.discourse.group/t/at-cmds-for-mirage-talon-from-mangoh-red-board-at-port/4803/14 "2020-07-27T06:51:14Z")
Followed this link : [https://source.sierrawireless.com/resources/legato/howtos/customizeuart/#sthash.8VPN578C.dpbs](https://source.sierrawireless.com/resources/legato/howtos/customizeuart/#sthash.8VPN578C.dpbs) where it mentions AT!MAPUART=a,b Where - `a` is the service type - `b` is the UART number, either `1` or `2` . Here’s a code sample setting `17` for the service type and `1` for the UART number: AT!MAPUART=17,1 ---
**Author:** ![jyijyi](https://sea2.discourse-cdn.com/flex016/user_avatar/mangoh.discourse.group/jyijyi/32/997_2.png) [@jyijyi](https://mangoh.discourse.group/u/jyijyi)\ **Post date:** [July 27, 2020, 7:03am UTC](https://mangoh.discourse.group/t/at-cmds-for-mirage-talon-from-mangoh-red-board-at-port/4803/15 "2020-07-27T07:03:33Z")
but when you do query, the meaning is different. ---
**Author:** ![tejaswisj](https://avatars.discourse-cdn.com/v4/letter/t/ee7513/32.png) [@tejaswisj](https://mangoh.discourse.group/u/tejaswisj)\ **Post date:** [July 27, 2020, 7:36am UTC](https://mangoh.discourse.group/t/at-cmds-for-mirage-talon-from-mangoh-red-board-at-port/4803/16 "2020-07-27T07:36:22Z")
Oh, i dint realize that !! Ok my bad. Thanks for the input. i got it. 17 is for uart1 while 16 for uart2. AFter the setting, rebooting the board. FYI, the diag port on the board is disabled. So get only /dev/ttyUSB0, ttyUSB1, ttyUSB2. USB0 - debug terminal USB2 - AT cmd terminal Followed the below steps : 1. Started the app, “app start atServerIntegrationTest” 2. Ran “app runProc atServerIntegrationTest --exe=atServerTest – tty /dev/ttyHS0” , but it just hangs and not come out. 3. On the host pc running ubuntu, tried to enter at+test cmd from the USB1 port , but does not work ---
**Author:** ![jyijyi](https://sea2.discourse-cdn.com/flex016/user_avatar/mangoh.discourse.group/jyijyi/32/997_2.png) [@jyijyi](https://mangoh.discourse.group/u/jyijyi)\ **Post date:** [July 27, 2020, 9:04am UTC](https://mangoh.discourse.group/t/at-cmds-for-mirage-talon-from-mangoh-red-board-at-port/4803/17 "2020-07-27T09:04:12Z")
You can use my attached application as reference. Steps: 1. enter the following AT commands in AT command port: AT!ENTERCND=“A710” AT!USBCOMP=1,1,8014D at!RESET 2. compile and download the application 3. in console type the following: app runProc atServerIntegrationTest --exe=atServerTest – tty /dev/ttyGS1 4. in the new raw data port (check in device manager), type ATE1, you should see the following response: * * * E TYPE: PARA E PARAM 0: 1 OK * * * 1. at+bridge=“OPEN” +BRIDGE TYPE: PARA +BRIDGE PARAM 0: OPEN OK at+bridge=“ADD” +BRIDGE TYPE: PARA +BRIDGE PARAM 0: ADD OK ati3 Manufacturer: Sierra Wireless, Incorporated Model: WP7607-1 Revision: SWI9X07Y\_02.28.03.03 000000 jenkins 2019/05/21 03:33:04 IMEI: 359780080500170 IMEI SV: 6 FSN: V2842570321010 +GCAP: +CGSM OK AT+KHTTPCFG=0,“116.66.221.43”,80,1 +KHTTPCFG PARAM 0: 0 +KHTTPCFG PARAM 1: 116.66.221.43 +KHTTPCFG PARAM 2: 80 +KHTTPCFG PARAM 3: 1 OK [UART\_KHTTP\_Demo1.rar](https://mangoh.discourse.group/uploads/short-url/m2Bk2SUUJMYwwND2GRIbG5taH3s.rar) (405.8 KB) ---
**Author:** ![tejaswisj](https://avatars.discourse-cdn.com/v4/letter/t/ee7513/32.png) [@tejaswisj](https://mangoh.discourse.group/u/tejaswisj)\ **Post date:** [July 28, 2020, 5:57pm UTC](https://mangoh.discourse.group/t/at-cmds-for-mirage-talon-from-mangoh-red-board-at-port/4803/18 "2020-07-28T17:57:00Z")
Is the port /dev/ttyGS1 or /dev/ttyHS0. On the Windows pc i do see a raw port that comes up. On ubuntu i am unable to find this raw port. When starting the app, using the command suggested in step 2, the app stops. When read the logread, there is failure in setting the baud rate to 115200, but tries to set to 4089 baud which is not standard and stops the app. ---
**Author:** ![jyijyi](https://sea2.discourse-cdn.com/flex016/user_avatar/mangoh.discourse.group/jyijyi/32/997_2.png) [@jyijyi](https://mangoh.discourse.group/u/jyijyi)\ **Post date:** [July 28, 2020, 8:11pm UTC](https://mangoh.discourse.group/t/at-cmds-for-mirage-talon-from-mangoh-red-board-at-port/4803/19 "2020-07-28T20:11:15Z")
/dev/ttyGS1 is a new port in module In ubuntu, there should be a new port called /dev/ttyUSB3 Lastly i have no idea what 4089 baud rate is … In line 1124 of atServerTest.c, it should set the baud rate to 115200. * * * if (LE\_OK != le\_tty\_SetBaudRate(fd,LE\_TTY\_SPEED\_115200)) * * * ---
**Author:** ![tejaswisj](https://avatars.discourse-cdn.com/v4/letter/t/ee7513/32.png) [@tejaswisj](https://mangoh.discourse.group/u/tejaswisj)\ **Post date:** [July 29, 2020, 4:51am UTC](https://mangoh.discourse.group/t/at-cmds-for-mirage-talon-from-mangoh-red-board-at-port/4803/20 "2020-07-29T04:51:17Z")
yes in the atServerTest.c file, the baud is set to 115200. in the logread, below, it fails telling cant set to the baud rate 4098. It shud have actually been 115200. root@swi-mdm9x28-wp:~# logread -f Jan 6 05:41:56 swi-mdm9x28-wp user.info Legato: INFO | supervisor[2840]/supervisor T=main | supervisor.c HandleRebootExpiry() 534 | Expired reboot timer Jan 6 05:42:08 swi-mdm9x28-wp user.info Legato: INFO | supervisor[2840]/supervisor T=main | app.c app\_Create() 3207 | Creating app ‘atServerIntegrationTest’ Jan 6 05:42:08 swi-mdm9x28-wp user.info Legato: INFO | supervisor[2840]/supervisor T=main | app.c app\_Start() 3420 | Starting app ‘atServerIntegrationTest’ Jan 6 05:42:08 swi-mdm9x28-wp user.info Legato: INFO | supervisor[2840]/supervisor T=main | app.c CreateFileLink() 2104 | Created file link ‘/legato/systems/current/apps/atServerIntegrationTest/read-only/lib/libComponent\_atServerTestComp.so’ to '/legato/systems/current/apps Jan 6 05:42:08 swi-mdm9x28-wp user.info Legato: INFO | supervisor[2840]/supervisor T=main | app.c CreateFileLink() 2104 | Created file link ‘/legato/systems/current/apps/atServerIntegrationTest/read-only/bin/atServerTest’ to '/legato/systems/current/appsWriteable/atServerIn Jan 6 05:43:03 swi-mdm9x28-wp user.warn Legato: -WRN- | supervisor[2840]/supervisor T=main | proc.c GetWatchdogAction() 359 | atServerTest@0 watchdogAction ‘’ in proc section Jan 6 05:43:03 swi-mdm9x28-wp user.info Legato: INFO | supervisor[2840]/supervisor T=main | resourceLimits.c SetRLimitValue() 282 | Setting resource limit maxCoreDumpFileBytes to value 8192. Jan 6 05:43:03 swi-mdm9x28-wp user.info Legato: INFO | supervisor[2840]/supervisor T=main | resourceLimits.c SetRLimitValue() 282 | Setting resource limit maxFileBytes to value 90112. Jan 6 05:43:03 swi-mdm9x28-wp user.info Legato: INFO | supervisor[2840]/supervisor T=main | resourceLimits.c SetRLimitValue() 282 | Setting resource limit maxLockedMemoryBytes to value 8192. Jan 6 05:43:03 swi-mdm9x28-wp user.info Legato: INFO | supervisor[2840]/supervisor T=main | resourceLimits.c SetRLimitValue() 282 | Setting resource limit maxFileDescriptors to value 256. Jan 6 05:43:03 swi-mdm9x28-wp user.info Legato: INFO | supervisor[2840]/supervisor T=main | resourceLimits.c SetRLimitValue() 282 | Setting resource limit maxMQueueBytes to value 512. Jan 6 05:43:03 swi-mdm9x28-wp user.info Legato: INFO | supervisor[2840]/supervisor T=main | resourceLimits.c SetRLimitValue() 282 | Setting resource limit maxThreads to value 20. Jan 6 05:43:03 swi-mdm9x28-wp user.info Legato: INFO | supervisor[2840]/supervisor T=main | resourceLimits.c SetRLimitValue() 282 | Setting resource limit maxQueuedSignals to value 100. Jan 6 05:43:03 swi-mdm9x28-wp user.info Legato: INFO | supervisor[2840]/supervisor T=main | proc.c proc\_Start() 1390 | Starting process ‘atServerTest@0’ with pid 3300 Jan 6 05:43:03 swi-mdm9x28-wp user.info Legato: INFO | supervisor[3300]/supervisor T=main | proc.c proc\_Start() 1355 | Execing ‘atServerTest’ Jan 6 05:43:03 swi-mdm9x28-wp user.warn Legato: -WRN- | _UNKNOWN_[3300]/framework T=main | LE\_FILENAME le\_fdMonitor\_Create() 667 | FD Monitor object name ‘atServerTest.atServerTestComp.le\_atServer’ truncated to ‘atServerTest.atServerTestComp.l’. Jan 6 05:43:03 swi-mdm9x28-wp user.warn Legato: -WRN- | _UNKNOWN_[3300]/framework T=main | LE\_FILENAME le\_fdMonitor\_Create() 667 | FD Monitor object name ‘atServerTest.atServerTestComp.le\_mcc’ truncated to ‘atServerTest.atServerTestComp.l’. Jan 6 05:43:03 swi-mdm9x28-wp user.info Legato: INFO | atServerTest@0[3300]/atServerTestComp T=main | atServerTest.c \_atServerTestComp\_COMPONENT\_INIT() 1229 | ============== AT server test starts ================= Jan 6 05:43:03 swi-mdm9x28-wp user.err Legato: =ERR= | atServerTest@0[3300]/framework T=main | LE\_FILENAME le\_tty\_SetBaudRate() 284 | TEJASWI Started this @ function setBaudrate in tty.c file Jan 6 05:43:03 swi-mdm9x28-wp user.err Legato: =ERR= | atServerTest@0[3300]/framework T=main | LE\_FILENAME le\_tty\_SetBaudRate() 290 | TEJASWI Started this @222 after function setBaudrate in tty.c file Jan 6 05:43:03 swi-mdm9x28-wp user.err Legato: =ERR= | atServerTest@0[3300]/framework T=main | LE\_FILENAME le\_tty\_SetBaudRate() 309 | TEJASWI : value of Output speed = 4105 input speed = 4105 Jan 6 05:43:03 swi-mdm9x28-wp user.err Legato: =ERR= | **atServerTest@0[3300]/framework T=main | LE\_FILENAME le\_tty\_SetBaudRate() 329 | Speed rate was not setted, 17/4098 not supported** Jan 6 05:43:03 swi-mdm9x28-wp user.err Legato: =ERR= | atServerTest@0[3300]/atServerTestComp T=main | atServerTest.c TtyLink() 1126 | Failed to configure TTY baud rate Jan 6 05:43:03 swi-mdm9x28-wp user.emerg Legato: _EMR_ | atServerTest@0[3300]/atServerTestComp T=main | atServerTest.c TtyLink() 1167 | Failed to connect to /dev/ttyGS1 Jan 6 05:43:03 swi-mdm9x28-wp user.info Legato: INFO | supervisor[2840]/supervisor T=main | proc.c proc\_SigChildHandler() 2051 | Process ‘atServerTest@0’ (PID: 3300) has exited with exit code 1. Jan 6 05:43:03 swi-mdm9x28-wp user.warn Legato: -WRN- | supervisor[2840]/supervisor T=main | app.c app\_SigChildHandler() 4015 | Process ‘atServerTest@0’ in app ‘atServerIntegrationTest’ faulted: Ignored. Jan 6 05:43:03 swi-mdm9x28-wp user.info Legato: INFO | supervisor[2840]/supervisor T=main | app.c app\_StopComplete() 4686 | app ‘atServerIntegrationTest’ has stopped. Jan 6 05:43:03 swi-mdm9x28-wp user.info Legato: INFO | supervisor[2840]/supervisor T=main | apps.c DeactivateAppContainer() 374 | Application ‘atServerIntegrationTest’ has stopped. ---
**Author:** ![jyijyi](https://sea2.discourse-cdn.com/flex016/user_avatar/mangoh.discourse.group/jyijyi/32/997_2.png) [@jyijyi](https://mangoh.discourse.group/u/jyijyi)\ **Post date:** [July 29, 2020, 5:15am UTC](https://mangoh.discourse.group/t/at-cmds-for-mirage-talon-from-mangoh-red-board-at-port/4803/21 "2020-07-29T05:15:47Z")
you can install my .update as I don’t see problem with my program. Jul 29 13:11:55 swi-mdm9x28-wp user.info Legato: INFO | atServerTest@0[18417]/atServerTestComp T=main | atServerTest.c \_atServerTestComp\_COMPONENT\_INIT() 1634 | ============== AT server test starts ================= Jul 29 13:11:55 swi-mdm9x28-wp user.info Legato: INFO | atServerTest@0[18417]/atServerTestComp T=main | atServerTest.c OpenPort() 1438 | Opening serial /dev/ttyGS1 at 115200 bps^M Jul 29 13:11:55 swi-mdm9x28-wp user.info Legato: INFO | atServerTest@0[18417]/atServerTestComp T=main | atServerTest.c OpenPort() 1471 | set serial at 115200 bps (default)^M Jul 29 13:11:55 swi-mdm9x28-wp user.info Legato: INFO | atServerDaemon[1353]/atServer T=main | le\_atServer.c le\_atServer\_Open() 2838 | created device [atServerIntegrationTest.wp76xx.update](https://mangoh.discourse.group/uploads/short-url/6PhuJISZ134VS2z5gb5Q8xgwHU3.update) (66.3 KB) [Next page](https://mangoh.discourse.group/t/at-cmds-for-mirage-talon-from-mangoh-red-board-at-port/4803.md?page=2)