# Application is not installed (MangOH Red WP8548) **URL:** \ **Category:** mangOH Red\ **Created:** [September 27, 2017, 2:18pm UTC](https://mangoh.discourse.group/t/application-is-not-installed-mangoh-red-wp8548/764 "2017-09-27T14:18:29Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![chsunil](https://avatars.discourse-cdn.com/v4/letter/c/22d042/32.png) [@chsunil](https://mangoh.discourse.group/u/chsunil)\ **Post date:** [September 27, 2017, 2:18pm UTC](https://mangoh.discourse.group/t/application-is-not-installed-mangoh-red-wp8548/764/1 "2017-09-27T14:18:29Z")
Hi I am able to build and update the existing workspace to device connect 192.168.2.2 but when i am trying to start it is showing “Application is not installed’” i am getting unpacking package and applying update: 100% to device at address 192.168.2.2 and able to see its installed. Please let me know, any changes i need to do. Please find the logs: Sep 27 14:01:20 swi-mdm9x15 [user.info](http://user.info) Legato: INFO | supervisor[465]/supervisor T=main | app.c CreateFileLink() 1489 | Skipping file link ‘/legato/systems/current/apps/legato\_SierraFx30/read-only/lib/libComponent\_legato\_SierraFx30\_Component.so’ to '/legato/systems/current Sep 27 14:01:20 swi-mdm9x15 [user.info](http://user.info) Legato: INFO | supervisor[465]/supervisor T=main | app.c CreateFileLink() 1489 | Skipping file link ‘/legato/systems/current/apps/legato\_SierraFx30/read-only/bin/legato\_SierraFx30\_exe’ to '/legato/systems/current/appsWriteable/legato\_ Sep 27 14:01:20 swi-mdm9x15 [user.info](http://user.info) Legato: INFO | supervisor[465]/supervisor T=main | app.c CreateFileLink() 1489 | Skipping file link ‘/bin/date’ to ‘/legato/systems/current/appsWriteable/legato\_SierraFx30/bin/date’: Already exists Sep 27 14:01:20 swi-mdm9x15 [user.info](http://user.info) Legato: INFO | supervisor[465]/supervisor T=main | app.c CreateFileLink() 1489 | Skipping file link ‘/bin/sh’ to ‘/legato/systems/current/appsWriteable/legato\_SierraFx30/bin/sh’: Already exists Sep 27 14:01:20 swi-mdm9x15 [user.info](http://user.info) Legato: INFO | supervisor[465]/supervisor T=main | app.c CreateFileLink() 1489 | Skipping file link ‘/etc/hosts’ to ‘/legato/systems/current/appsWriteable/legato\_SierraFx30/etc/hosts’: Already exists Sep 27 14:01:20 swi-mdm9x15 [user.info](http://user.info) Legato: INFO | supervisor[465]/supervisor T=main | app.c CreateFileLink() 1489 | Skipping file link ‘/etc/nsswitch.conf’ to ‘/legato/systems/current/appsWriteable/legato\_SierraFx30/etc/nsswitch.conf’: Already exists Sep 27 14:01:20 swi-mdm9x15 user.err Legato: =ERR= | supervisor[465]/supervisor T=main | app.c CreateFileLink() 1461 | Could not stat file at ‘/etc/resolv.conf’. No such file or directory root@swi-mdm9x15:~# app start legato\_SierraFx30 Application ‘legato\_SierraFx30’ is not installed. Thanks in advance. Thanks, Sunil ---
**Author:** ![asyal](https://sea2.discourse-cdn.com/flex016/user_avatar/mangoh.discourse.group/asyal/32/78_2.png) [@asyal](https://mangoh.discourse.group/u/asyal)\ **Post date:** [September 27, 2017, 4:11pm UTC](https://mangoh.discourse.group/t/application-is-not-installed-mangoh-red-wp8548/764/2 "2017-09-27T16:11:58Z")
are you using mangohred or fx30? ---
**Author:** ![chsunil](https://avatars.discourse-cdn.com/v4/letter/c/22d042/32.png) [@chsunil](https://mangoh.discourse.group/u/chsunil)\ **Post date:** [September 27, 2017, 5:18pm UTC](https://mangoh.discourse.group/t/application-is-not-installed-mangoh-red-wp8548/764/3 "2017-09-27T17:18:22Z")
I am using mangohred kit, we have created workspace for fx30 and I am trying to use it for mangohred. we can build .adef on mangohred or need to use .sdef files for mangohred? i am getting unpacking package and applying update: 100% to device at address 192.168.2.2 and able to see its installed (build with .adef file: mkapp -t wp85 legato\_SeirraFx30.adef). Thanks, Sunil ---
**Author:** ![asyal](https://sea2.discourse-cdn.com/flex016/user_avatar/mangoh.discourse.group/asyal/32/78_2.png) [@asyal](https://mangoh.discourse.group/u/asyal)\ **Post date:** [September 27, 2017, 5:24pm UTC](https://mangoh.discourse.group/t/application-is-not-installed-mangoh-red-wp8548/764/4 "2017-09-27T17:24:22Z")
what does this workspace for fx30 do? Most probably it is being loaded but crashes ---
**Author:** ![chsunil](https://avatars.discourse-cdn.com/v4/letter/c/22d042/32.png) [@chsunil](https://mangoh.discourse.group/u/chsunil)\ **Post date:** [September 27, 2017, 5:36pm UTC](https://mangoh.discourse.group/t/application-is-not-installed-mangoh-red-wp8548/764/5 "2017-09-27T17:36:40Z")
ok. Workspace is for to get wifi access points list with ssid name and etc. By using mangohred kit we can get the same right? ---
**Author:** ![asyal](https://sea2.discourse-cdn.com/flex016/user_avatar/mangoh.discourse.group/asyal/32/78_2.png) [@asyal](https://mangoh.discourse.group/u/asyal)\ **Post date:** [September 27, 2017, 5:43pm UTC](https://mangoh.discourse.group/t/application-is-not-installed-mangoh-red-wp8548/764/6 "2017-09-27T17:43:42Z")
Hi Sunil, You need to either have a WiFi iot card or wait for WiFi software for mangOH REd that will be available in late Oct or early nov. regards, Ashish ---
**Author:** ![chsunil](https://avatars.discourse-cdn.com/v4/letter/c/22d042/32.png) [@chsunil](https://mangoh.discourse.group/u/chsunil)\ **Post date:** [September 27, 2017, 6:41pm UTC](https://mangoh.discourse.group/t/application-is-not-installed-mangoh-red-wp8548/764/7 "2017-09-27T18:41:17Z")
Hi ashish, Thanks for info. I am trying to start the samples like wifiClientTest or wifiApTest but wifi connect failed with my access point details (ssid & password). WiFi IOT Card means, is it will come with MangOH Red kit or we need to get it separately. Please provide information related to Wifi IOT card. It will helpful for further step. Thanks in advance. Thanks & Regards, Ch Sunil Kumar ---
**Author:** ![asyal](https://sea2.discourse-cdn.com/flex016/user_avatar/mangoh.discourse.group/asyal/32/78_2.png) [@asyal](https://mangoh.discourse.group/u/asyal)\ **Post date:** [September 27, 2017, 7:05pm UTC](https://mangoh.discourse.group/t/application-is-not-installed-mangoh-red-wp8548/764/8 "2017-09-27T19:05:39Z")
Here is the link for the WiFi card:[https://www.digikey.com/product-detail/en/talon-communications-inc/MIRAGE-PIFA/1788-1008-ND/7243279](https://www.digikey.com/product-detail/en/talon-communications-inc/MIRAGE-PIFA/1788-1008-ND/7243279) ---
**Author:** ![chsunil](https://avatars.discourse-cdn.com/v4/letter/c/22d042/32.png) [@chsunil](https://mangoh.discourse.group/u/chsunil)\ **Post date:** [September 27, 2017, 7:31pm UTC](https://mangoh.discourse.group/t/application-is-not-installed-mangoh-red-wp8548/764/9 "2017-09-27T19:31:40Z")
Thanks Ashish. I will check ---
**Author:** ![ollie](https://avatars.discourse-cdn.com/v4/letter/o/a87d85/32.png) [@ollie](https://mangoh.discourse.group/u/ollie)\ **Post date:** [September 27, 2017, 9:38pm UTC](https://mangoh.discourse.group/t/application-is-not-installed-mangoh-red-wp8548/764/10 "2017-09-27T21:38:25Z")
So if I understand correctly, onboard wi-fi is a planned feature to be implemented later this year with a firmware package update? I’ve got the talon mirage wi-fi board, but dont see any of the power LED’s for the IOT expansion board light up when plugged in and powered on. Is there a jumper config that i missed? ---
**Author:** ![asyal](https://sea2.discourse-cdn.com/flex016/user_avatar/mangoh.discourse.group/asyal/32/78_2.png) [@asyal](https://mangoh.discourse.group/u/asyal)\ **Post date:** [September 27, 2017, 10:17pm UTC](https://mangoh.discourse.group/t/application-is-not-installed-mangoh-red-wp8548/764/11 "2017-09-27T22:17:37Z")
> [@ollie](#): > > I’ve got the talon mirage wi-fi board, but dont see any of the power LED’s for the IOT expansion board light up when plugged in and powered on. Is there a jumper config that i missed? yes, correct, we will provide instructions for that. For Talon card, can you try the following with release 14 firmware: echo 2 \> /sys/class/gpio/export echo out \> /sys/class/gpio/gpio2/direction echo 1 \> /sys/class/gpio/gpio2/value echo 8 \> /sys/class/gpio/export echo out \> /sys/class/gpio/gpio8/direction echo 1 \> /sys/class/gpio/gpio8/value Note, I havent tried this myself but will do so tomorrow. ---
**Author:** ![ollie](https://avatars.discourse-cdn.com/v4/letter/o/a87d85/32.png) [@ollie](https://mangoh.discourse.group/u/ollie)\ **Post date:** [September 28, 2017, 1:04am UTC](https://mangoh.discourse.group/t/application-is-not-installed-mangoh-red-wp8548/764/12 "2017-09-28T01:04:35Z")
Thanks! That got the board to power. However the sample app _wi-fi client start_ does not seem to start successfully, see below for logread > Linux swi-mdm9x15 3.14.29ltsi-13c67b16ff\_922830eb31 #2 PREEMPT Fri Apr 15 02:38:16 PDT 2016 armv7l GNU/Linux > root@swi-mdm9x15:~# echo 2 \> /sys/class/gpio/export > root@swi-mdm9x15:~# echo out \> /sys/class/gpio/gpio2/direction > root@swi-mdm9x15:~# echo 1 \> /sys/class/gpio/gpio2/value > root@swi-mdm9x15:~# > root@swi-mdm9x15:~# echo 8 \> /sys/class/gpio/export > root@swi-mdm9x15:~# echo out \> /sys/class/gpio/gpio8/direction > root@swi-mdm9x15:~# echo 1 \> /sys/class/gpio/gpio8/value > root@swi-mdm9x15:~# > root@swi-mdm9x15:~# logread -f > ^C > root@swi-mdm9x15:~# logread -f & > root@swi-mdm9x15:~# > root@swi-mdm9x15:~# > root@swi-mdm9x15:~# > root@swi-mdm9x15:~# > root@swi-mdm9x15:~# wifi client start > Jan 6 00:07:44 swi-mdm9x15 user.debug Legato: DBUG | wifiService[544]/framework T=main | LE\_FILENAME ExtractFileDescriptor() 34 | Received fd (11). > Jan 6 00:07:44 swi-mdm9x15 user.debug Legato: DBUG | wifiService[544]/framework T=main | LE\_FILENAME ExtractFileDescriptor() 34 | Received fd (12). > Jan 6 00:07:44 swi-mdm9x15 user.debug Legato: DBUG | wifiService[544]/daemon T=main | le\_wifiClient.c le\_wifiClient\_Start() 560 | Client starts > Jan 6 00:07:44 swi-mdm9x15 user.info Legato: INFO | wifiService[544]/daemon T=main | pa\_wifi\_client\_ti.c pa\_wifiClient\_Start() 306 | WiFi client starts > Jan 6 00:07:44 swi-mdm9x15 user.debug Legato: DBUG | wifiService[544]/framework T=main | LE\_FILENAME le\_mem\_ForceAlloc() 841 | Memory pool ‘framework.DestructorObjs’ overflowed. Expanded to 2 blocks. > Jan 6 00:07:44 swi-mdm9x15 user.debug Legato: DBUG | wifiService[544]/framework T=WifiClientPaThread | LE\_FILENAME PThreadStartRoutine() 362 | Set nice level to 0. > Jan 6 00:07:44 swi-mdm9x15 user.debug Legato: DBUG | wifiService[544]/framework T=WifiClientPaThread | LE\_FILENAME le\_mem\_ForceAlloc() 841 | Memory pool ‘framework.DestructorObjs’ overflowed. Expanded to 3 blocks. > Jan 6 00:07:44 swi-mdm9x15 user.info Legato: INFO | wifiService[544]/daemon T=WifiClientPaThread | pa\_wifi\_client\_ti.c WifiClientPaThreadMain() 211 | Started! > Jan 6 00:07:44 swi-mdm9x15 user.info Legato: INFO | wifiService[544] | WIFI\_START > Jan 6 00:07:44 swi-mdm9x15 user.info Legato: INFO | wifiService[544]/daemon T=WifiClientPaThread | pa\_wifi\_client\_ti.c WifiClientPaThreadMain() 228 | PARSING:WIFI\_SET\_EVENT : len:15 > Jan 6 00:07:44 swi-mdm9x15 user.info kernel: [283.017610] Loading modules backported from Linux version R8.5 > Jan 6 00:07:44 swi-mdm9x15 user.info kernel: [283.022462] Backport generated by backports.git R8.5 > Jan 6 00:07:44 swi-mdm9x15 user.info kernel: [283.049107] gpio\_sync\_ri: RI owner is Modem > Jan 6 00:07:44 swi-mdm9x15 user.debug kernel: [283.052281] -\>gpio16 = 0 > Jan 6 00:07:44 swi-mdm9x15 user.debug kernel: [283.052311] -\>gpio17 = 0 > Jan 6 00:07:44 swi-mdm9x15 user.debug kernel: [283.052311] -\>gpio18 = 0 > Jan 6 00:07:44 swi-mdm9x15 user.debug kernel: [283.052342] -\>gpio19 = 0 > Jan 6 00:07:44 swi-mdm9x15 user.info kernel: [283.277918] cfg80211: Calling CRDA to update world regulatory domain > Jan 6 00:07:44 swi-mdm9x15 user.info kernel: [283.573111] cfg80211: World regulatory domain updated: > Jan 6 00:07:44 swi-mdm9x15 user.info kernel: [283.577842] cfg80211: DFS Master region: unset > Jan 6 00:07:44 swi-mdm9x15 user.info kernel: [283.581596] cfg80211: (start\_freq - end\_freq @ bandwidth), (max\_antenna\_gain, max\_eirp), (dfs\_cac\_time) > Jan 6 00:07:44 swi-mdm9x15 user.info kernel: [283.591759] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) > Jan 6 00:07:44 swi-mdm9x15 user.info kernel: [283.599572] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) > Jan 6 00:07:44 swi-mdm9x15 user.info kernel: [283.607507] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) > Jan 6 00:07:44 swi-mdm9x15 user.info kernel: [283.615290] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) > Jan 6 00:07:44 swi-mdm9x15 user.info kernel: [283.625057] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) > Jan 6 00:07:44 swi-mdm9x15 user.info kernel: [283.634426] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) > Jan 6 00:07:44 swi-mdm9x15 user.info kernel: [283.642484] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) > Jan 6 00:07:44 swi-mdm9x15 user.info kernel: [283.650541] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) > Jan 6 00:07:44 swi-mdm9x15 user.info Legato: INFO | wifiService[544]/daemon T=WifiClientPaThread | pa\_wifi\_client\_ti.c WifiClientPaThreadMain() 228 | PARSING:phy #0: regulatory domain change: set to world roaming by the wireless core upon initialization request : len:104 > Jan 6 00:07:45 swi-mdm9x15 user.err kernel: [284.181229] qup\_i2c qup\_i2c.0: QUP: I2C status flags :0x1300c8, irq:187 > Jan 6 00:07:45 swi-mdm9x15 user.err kernel: [284.186906] qup\_i2c qup\_i2c.0: I2C slave addr:0x70 not connected > Jan 6 00:07:45 swi-mdm9x15 user.err Legato: =ERR= | wifiService[544] | ERR\* failed to read i2c data > Jan 6 00:07:45 swi-mdm9x15 user.err Legato: =ERR= | wifiService[544] | ERR\* I2c get addr 0x70 value failure > Jan 6 00:07:45 swi-mdm9x15 user.err Legato: =ERR= | wifiService[544] | ERR\* Set mode 0 failure > Jan 6 00:07:45 swi-mdm9x15 user.err kernel: [284.195116] qup\_i2c qup\_i2c.0: QUP: I2C status flags :0x1300c8, irq:187 > Jan 6 00:07:45 swi-mdm9x15 user.err Legato: =ERR= | wifiService[544] | ERR\* failed to read i2c data > Jan 6 00:07:45 swi-mdm9x15 user.err kernel: [284.201281] qup\_i2c qup\_i2c.0: I2C slave addr:0x70 not connected > Jan 6 00:07:45 swi-mdm9x15 user.err Legato: =ERR= | wifiService[544] | ERR\* I2c get addr 0x70 value failure > Jan 6 00:07:45 swi-mdm9x15 user.err Legato: =ERR= | wifiService[544] | ERR\* Set polarity 0 failure > Jan 6 00:07:45 swi-mdm9x15 user.err kernel: [284.208270] qup\_i2c qup\_i2c.0: QUP: I2C status flags :0x1300c8, irq:187 > Jan 6 00:07:45 swi-mdm9x15 user.err kernel: [284.213917] qup\_i2c qup\_i2c.0: I2C slave addr:0x70 not connected > Jan 6 00:07:45 swi-mdm9x15 user.err Legato: =ERR= | wifiService[544] | ERR\* failed to read i2c data > Jan 6 00:07:45 swi-mdm9x15 user.err Legato: =ERR= | wifiService[544] | ERR\* I2c get addr 0x70 value failure > Jan 6 00:07:45 swi-mdm9x15 user.err Legato: =ERR= | wifiService[544] | ERR\* Set output 1 failure > Jan 6 00:07:45 swi-mdm9x15 user.info kernel: [284.239462] mmc0: mci-version: 18 > Jan 6 00:07:45 swi-mdm9x15 user.info kernel: [284.247703] mmc0: bam physical base=0x12182000 > Jan 6 00:07:45 swi-mdm9x15 user.info kernel: [284.251152] mmc0: bam virtual base=0xd0670000 > Jan 6 00:07:45 swi-mdm9x15 user.info kernel: [284.255486] sps:BAM 0x12182000 is registered. > Jan 6 00:07:45 swi-mdm9x15 user.info kernel: [284.277124] mmc0: BAM device registered. bam\_handle=0xcdb52e00\<6\>[284.282313] sps:REVISION of BAM 0xd0670000 is 0x5. > Jan 6 00:07:45 swi-mdm9x15 user.info kernel: [284.289302] mmc0: Qualcomm MSM SDCC-BAM at 0x0000000012182000 irq 130 > Jan 6 00:07:45 swi-mdm9x15 user.info kernel: [284.294765] mmc0: Qualcomm MSM SDCC-DML at 0x0000000012180800 > Jan 6 00:07:45 swi-mdm9x15 user.err kernel: [284.301266] mmc0: No card detect facilities available > Jan 6 00:07:45 swi-mdm9x15 user.info kernel: [284.309964] mmc0: Qualcomm MSM SDCC-core at 0x0000000012180000 irq 136,0 dma -1 dmacrcri -1 > Jan 6 00:07:45 swi-mdm9x15 user.info kernel: [284.327239] mmc0: 8 bit data mode disabled > Jan 6 00:07:45 swi-mdm9x15 user.info kernel: [284.330321] mmc0: 4 bit data mode enabled > Jan 6 00:07:45 swi-mdm9x15 user.info kernel: [284.346131] mmc0: polling status mode disabled > Jan 6 00:07:45 swi-mdm9x15 user.info kernel: [284.355073] mmc0: MMC clock 400000 → 48000000 Hz, PCLK 0 Hz > Jan 6 00:07:45 swi-mdm9x15 user.info kernel: [284.382145] mmc0: Slot eject status = 0 > Jan 6 00:07:45 swi-mdm9x15 user.info kernel: [284.395452] mmc0: Power save feature enable = 1 > Jan 6 00:07:45 swi-mdm9x15 user.info kernel: [284.409766] mmc0: SPS-BAM data transfer mode available > Jan 6 00:07:51 swi-mdm9x15 user.info Legato: INFO | wifiService[544] | Failed to start TI wifi > Jan 6 00:07:51 swi-mdm9x15 user.err kernel: [290.279963] qup\_i2c qup\_i2c.0: QUP: I2C status flags :0x1343c8, irq:187 > Jan 6 00:07:51 swi-mdm9x15 user.err kernel: [290.285609] qup\_i2c qup\_i2c.0: I2C slave addr:0x70 not connected > Jan 6 00:07:51 swi-mdm9x15 user.err Legato: =ERR= | wifiService[544] | ERR\* failed to read i2c data > Jan 6 00:07:51 swi-mdm9x15 user.err Legato: =ERR= | wifiService[544] | ERR\* I2c get addr 0x70 value failure > Jan 6 00:07:51 swi-mdm9x15 user.err Legato: =ERR= | wifiService[544] | ERR\* Set mode 0 failure > Jan 6 00:07:51 swi-mdm9x15 user.err kernel: [290.298885] qup\_i2c qup\_i2c.0: QUP: I2C status flags :0x1343c8, irq:187 > Jan 6 00:07:51 swi-mdm9x15 user.err kernel: [290.304532] qup\_i2c qup\_i2c.0: I2C slave addr:0x70 not connected > Jan 6 00:07:51 swi-mdm9x15 user.err Legato: =ERR= | wifiService[544] | ERR\* failed to read i2c data > Jan 6 00:07:51 swi-mdm9x15 user.err Legato: =ERR= | wifiService[544] | ERR\* I2c get addr 0x70 value failure > Jan 6 00:07:51 swi-mdm9x15 user.err Legato: =ERR= | wifiService[544] | ERR\* Set polarity 0 failure > Jan 6 00:07:51 swi-mdm9x15 user.err kernel: [290.328338] qup\_i2c qup\_i2c.0: QUP: I2C status flags :0x1343c8, irq:187 > Jan 6 00:07:51 swi-mdm9x15 user.err kernel: [290.333984] qup\_i2c qup\_i2c.0: I2C slave addr:0x70 not connected > Jan 6 00:07:51 swi-mdm9x15 user.err Legato: =ERR= | wifiService[544] | ERR\* failed to read i2c data > Jan 6 00:07:51 swi-mdm9x15 user.err Legato: =ERR= | wifiService[544] | ERR\* I2c get addr 0x70 value failure > Jan 6 00:07:51 swi-mdm9x15 user.err Legato: =ERR= | wifiService[544] | ERR\* Set output 0 failure > Jan 6 00:07:51 swi-mdm9x15 user.info kernel: [290.378574] mmc0: mci-version: 18 > Jan 6 00:07:51 swi-mdm9x15 user.info kernel: [290.388249] mmc0: bam physical base=0x12182000 > Jan 6 00:07:51 swi-mdm9x15 user.info kernel: [290.391667] mmc0: bam virtual base=0xd07fc000 > Jan 6 00:07:51 swi-mdm9x15 user.info kernel: [290.396032] sps:BAM 0x12182000 is registered. > Jan 6 00:07:51 swi-mdm9x15 user.info kernel: [290.417243] mmc0: BAM device registered. bam\_handle=0xcbe54400\<6\>[290.422493] sps:REVISION of BAM 0xd07fc000 is 0x5. > Jan 6 00:07:51 swi-mdm9x15 user.info kernel: [290.428414] mmc0: Qualcomm MSM SDCC-BAM at 0x0000000012182000 irq 130 > Jan 6 00:07:51 swi-mdm9x15 user.info kernel: [290.433847] mmc0: Qualcomm MSM SDCC-DML at 0x0000000012180800 > Jan 6 00:07:51 swi-mdm9x15 user.err kernel: [290.440256] mmc0: No card detect facilities available > Jan 6 00:07:51 swi-mdm9x15 user.info kernel: [290.449412] mmc0: Qualcomm MSM SDCC-core at 0x0000000012180000 irq 136,0 dma -1 dmacrcri -1 > Jan 6 00:07:51 swi-mdm9x15 user.info kernel: [290.467236] mmc0: 8 bit data mode disabled > Jan 6 00:07:51 swi-mdm9x15 user.info kernel: [290.470959] mmc0: 4 bit data mode enabled > Jan 6 00:07:51 swi-mdm9x15 user.info kernel: [290.474317] mmc0: polling status mode disabled > Jan 6 00:07:51 swi-mdm9x15 user.info kernel: [290.487654] mmc0: MMC clock 400000 → 48000000 Hz, PCLK 0 Hz > Jan 6 00:07:51 swi-mdm9x15 user.info kernel: [290.513840] mmc0: Slot eject status = 0 > Jan 6 00:07:51 swi-mdm9x15 user.info kernel: [290.538104] mmc0: Power save feature enable = 1 > Jan 6 00:07:51 swi-mdm9x15 user.info kernel: [290.557942] mmc0: SPS-BAM data transfer mode available > Jan 6 00:07:54 swi-mdm9x15 user.err kernel: [292.734961] qup\_i2c qup\_i2c.0: QUP: I2C status flags :0x1300c8, irq:187 > Jan 6 00:07:54 swi-mdm9x15 user.err Legato: =ERR= | wifiService[544] | ERR\* failed to read i2c data > Jan 6 00:07:54 swi-mdm9x15 user.err kernel: [292.741156] qup\_i2c qup\_i2c.0: I2C slave addr:0x70 not connected > Jan 6 00:07:54 swi-mdm9x15 user.err Legato: =ERR= | wifiService[544] | ERR\* I2c get addr 0x70 value failure > Jan 6 00:07:54 swi-mdm9x15 user.err Legato: =ERR= | wifiService[544] | ERR\* Set mode 0 failure > Jan 6 00:07:54 swi-mdm9x15 user.err kernel: [292.748512] qup\_i2c qup\_i2c.0: QUP: I2C status flags :0x1300c8, irq:187 > Jan 6 00:07:54 swi-mdm9x15 user.err kernel: [292.754188] qup\_i2c qup\_i2c.0: I2C slave addr:0x70 not connected > Jan 6 00:07:54 swi-mdm9x15 user.err Legato: =ERR= | wifiService[544] | ERR\* failed to read i2c data > Jan 6 00:07:54 swi-mdm9x15 user.err Legato: =ERR= | wifiService[544] | ERR\* I2c get addr 0x70 value failure > Jan 6 00:07:54 swi-mdm9x15 user.err Legato: =ERR= | wifiService[544] | ERR\* Set polarity 0 failure > Jan 6 00:07:54 swi-mdm9x15 user.err kernel: [292.761910] qup\_i2c qup\_i2c.0: QUP: I2C status flags :0x1300c8, irq:187 > Jan 6 00:07:54 swi-mdm9x15 user.err Legato: =ERR= | wifiService[544] | ERR\* failed to read i2c data > Jan 6 00:07:54 swi-mdm9x15 user.err Legato: =ERR= | wifiService[544] | ERR\* I2c get addr 0x70 value failure > Jan 6 00:07:54 swi-mdm9x15 user.err Legato: =ERR= | wifiService[544] | ERR\* Set output 1 failure > Jan 6 00:07:54 swi-mdm9x15 user.err kernel: [292.767831] qup\_i2c qup\_i2c.0: I2C slave addr:0x70 not connected > Jan 6 00:07:54 swi-mdm9x15 user.info kernel: [292.790202] mmc0: mci-version: 18 > Jan 6 00:07:54 swi-mdm9x15 user.info kernel: [292.797710] mmc0: bam physical base=0x12182000 > Jan 6 00:07:54 swi-mdm9x15 user.info kernel: [292.801129] mmc0: bam virtual base=0xd0870000 > Jan 6 00:07:54 swi-mdm9x15 user.info kernel: [292.805493] sps:BAM 0x12182000 is registered. > Jan 6 00:07:54 swi-mdm9x15 user.info kernel: [292.827132] mmc0: BAM device registered. bam\_handle=0xcbe54600\<6\>[292.832321] sps:REVISION of BAM 0xd0870000 is 0x5. > Jan 6 00:07:54 swi-mdm9x15 user.info kernel: [292.839890] mmc0: Qualcomm MSM SDCC-BAM at 0x0000000012182000 irq 130 > Jan 6 00:07:54 swi-mdm9x15 user.info kernel: [292.845322] mmc0: Qualcomm MSM SDCC-DML at 0x0000000012180800 > Jan 6 00:07:54 swi-mdm9x15 user.err kernel: [292.851854] mmc0: No card detect facilities available > Jan 6 00:07:54 swi-mdm9x15 user.info kernel: [292.860857] mmc0: Qualcomm MSM SDCC-core at 0x0000000012180000 irq 136,0 dma -1 dmacrcri -1 > Jan 6 00:07:54 swi-mdm9x15 user.info kernel: [292.877216] mmc0: 8 bit data mode disabled > Jan 6 00:07:54 swi-mdm9x15 user.info kernel: [292.880299] mmc0: 4 bit data mode enabled > Jan 6 00:07:54 swi-mdm9x15 user.info kernel: [292.895650] mmc0: polling status mode disabled > Jan 6 00:07:54 swi-mdm9x15 user.info kernel: [292.904623] mmc0: MMC clock 400000 → 48000000 Hz, PCLK 0 Hz > Jan 6 00:07:54 swi-mdm9x15 user.info kernel: [292.931756] mmc0: Slot eject status = 0 > Jan 6 00:07:54 swi-mdm9x15 user.info kernel: [292.950526] mmc0: Power save feature enable = 1 > Jan 6 00:07:54 swi-mdm9x15 user.info kernel: [292.964565] mmc0: SPS-BAM data transfer mode available > Jan 6 00:07:54 swi-mdm9x15 user.info kernel: [293.015809] Loading modules backported from Linux version R8.5 > Jan 6 00:07:54 swi-mdm9x15 user.info kernel: [293.037295] Backport generated by backports.git R8.5 > Jan 6 00:07:54 swi-mdm9x15 user.info kernel: [293.136578] cfg80211: Calling CRDA to update world regulatory domain > Jan 6 00:07:54 swi-mdm9x15 user.info kernel: [293.306180] cfg80211: World regulatory domain updated: > Jan 6 00:07:54 swi-mdm9x15 user.info kernel: [293.337158] cfg80211: DFS Master region: unset > Jan 6 00:07:54 swi-mdm9x15 user.info kernel: [293.340515] cfg80211: (start\_freq - end\_freq @ bandwidth), (max\_antenna\_gain, max\_eirp), (dfs\_cac\_time) > Jan 6 00:07:54 swi-mdm9x15 user.info kernel: [293.404639] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) > Jan 6 00:07:54 swi-mdm9x15 user.info kernel: [293.441477] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) > Jan 6 00:07:54 swi-mdm9x15 user.info kernel: [293.469891] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) > Jan 6 00:07:54 swi-mdm9x15 user.info kernel: [293.476880] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) > Jan 6 00:07:54 swi-mdm9x15 user.info kernel: [293.512040] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) > Jan 6 00:07:54 swi-mdm9x15 user.info kernel: [293.521074] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) > Jan 6 00:07:54 swi-mdm9x15 user.info kernel: [293.529284] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) > Jan 6 00:07:54 swi-mdm9x15 user.info kernel: [293.536578] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) > Jan 6 00:07:59 swi-mdm9x15 user.info Legato: INFO | wifiService[544] | Failed to start TI wifi > ERROR: le\_wifiClient\_Start returns ERROR. > root@swi-mdm9x15:~# Jan 6 00:08:04 swi-mdm9x15 user.info Legato: INFO | wifiService[544] | Failed to start TI wifi > Jan 6 00:08:04 swi-mdm9x15 user.err Legato: =ERR= | wifiService[544]/daemon T=main | pa\_wifi\_client\_ti.c pa\_wifiClient\_Start() 329 | WiFi Client Command Failed: (23296)wlan0 WIFI\_START > Jan 6 00:08:04 swi-mdm9x15 user.err Legato: =ERR= | wifiService[544]/daemon T=main | le\_wifiClient.c le\_wifiClient\_Start() 573 | ERROR: pa\_wifiClient\_Start returns -6 > Jan 6 00:08:04 swi-mdm9x15 user.debug Legato: DBUG | wifiService[544]/framework T=main | le\_wifiClient\_server.c Handle\_le\_wifiClient\_Start() 512 | Sending response to client session 0x27d6c : 4 bytes sent > Jan 6 00:08:05 swi-mdm9x15 user.debug Legato: DBUG | wifiService[544]/daemon T=main | le\_wifiClient.c CloseSessionEventHandler() 414 | sessionRef 0x27d6c GetFirstSessionRef (nil) > Jan 6 00:08:05 swi-mdm9x15 user.debug Legato: DBUG | wifiService[544]/framework T=main | le\_wifiClient\_server.c CleanupClientData() 126 | Client 0x27d6c is closed !!! > Jan 6 00:08:05 swi-mdm9x15 user.debug Legato: DBUG | wifiService[544]/framework T=main | le\_wifiAp\_server.c CleanupClientData() 126 | Client 0x27cdc is closed !!! ---
**Author:** ![asyal](https://sea2.discourse-cdn.com/flex016/user_avatar/mangoh.discourse.group/asyal/32/78_2.png) [@asyal](https://mangoh.discourse.group/u/asyal)\ **Post date:** [September 28, 2017, 2:22am UTC](https://mangoh.discourse.group/t/application-is-not-installed-mangoh-red-wp8548/764/13 "2017-09-28T02:22:57Z")
I see the issue. We need to activate gpio expander to enable the muxing between the SD card and iot0. Let me see what we can do on this shortly. ---
**Author:** ![ollie](https://avatars.discourse-cdn.com/v4/letter/o/a87d85/32.png) [@ollie](https://mangoh.discourse.group/u/ollie)\ **Post date:** [October 19, 2017, 5:37pm UTC](https://mangoh.discourse.group/t/application-is-not-installed-mangoh-red-wp8548/764/14 "2017-10-19T17:37:57Z")
Any progress on this? If not is there a known working wi-fi module for the mangOH red. ---
**Author:** ![asyal](https://sea2.discourse-cdn.com/flex016/user_avatar/mangoh.discourse.group/asyal/32/78_2.png) [@asyal](https://mangoh.discourse.group/u/asyal)\ **Post date:** [October 19, 2017, 5:44pm UTC](https://mangoh.discourse.group/t/application-is-not-installed-mangoh-red-wp8548/764/15 "2017-10-19T17:44:33Z")
We are updating the yocto to make this easier . FW release is in December and we will provide support for both on board WIFi as well as the TI IoT card at that time. ---
**Author:** ![ollie](https://avatars.discourse-cdn.com/v4/letter/o/a87d85/32.png) [@ollie](https://mangoh.discourse.group/u/ollie)\ **Post date:** [October 19, 2017, 5:45pm UTC](https://mangoh.discourse.group/t/application-is-not-installed-mangoh-red-wp8548/764/16 "2017-10-19T17:45:15Z")
Cool thanks. Last question, can you recommend a USB wireless adaptor or chipset that is known to be working? ---
**Author:** ![luigitondo](https://sea2.discourse-cdn.com/flex016/user_avatar/mangoh.discourse.group/luigitondo/32/498_2.png) [@luigitondo](https://mangoh.discourse.group/u/luigitondo)\ **Post date:** [November 23, 2017, 12:18pm UTC](https://mangoh.discourse.group/t/application-is-not-installed-mangoh-red-wp8548/764/17 "2017-11-23T12:18:03Z")
Hi Ashish, do you know whether the FW to be released in December will also contain the driver for the Bluetooth features of the TI device on board of the Mirage IoT card? that would be awesome! 🙂 thanks BR Luigi ---
**Author:** ![asyal](https://sea2.discourse-cdn.com/flex016/user_avatar/mangoh.discourse.group/asyal/32/78_2.png) [@asyal](https://mangoh.discourse.group/u/asyal)\ **Post date:** [November 23, 2017, 5:35pm UTC](https://mangoh.discourse.group/t/application-is-not-installed-mangoh-red-wp8548/764/18 "2017-11-23T17:35:45Z")
Have you tried building the driver as shown on the wiki pages and videos? ---
**Author:** ![luigitondo](https://sea2.discourse-cdn.com/flex016/user_avatar/mangoh.discourse.group/luigitondo/32/498_2.png) [@luigitondo](https://mangoh.discourse.group/u/luigitondo)\ **Post date:** [November 24, 2017, 9:57am UTC](https://mangoh.discourse.group/t/application-is-not-installed-mangoh-red-wp8548/764/19 "2017-11-24T09:57:59Z")
Hi, yes, I did try. And I think I managed to build and install the driver. However, I got some problems when testing the results (as detailed in this post: [Bluetooth WL18xx driver for mangOH: how to flash the driver](http://mangoh.discourse.group/t/bluetooth-wl18xx-driver-for-mangoh-how-to-flash-the-driver/919)). BR Luigi ---
**Author:** ![asyal](https://sea2.discourse-cdn.com/flex016/user_avatar/mangoh.discourse.group/asyal/32/78_2.png) [@asyal](https://mangoh.discourse.group/u/asyal)\ **Post date:** [November 24, 2017, 2:10pm UTC](https://mangoh.discourse.group/t/application-is-not-installed-mangoh-red-wp8548/764/20 "2017-11-24T14:10:09Z")
Seems like you don’t have the latest version of mangoh system on your host machine… What version of Legato have you installed on your host computer? If you followed the mangoh red getting started guide, then you should run the following commands Get the latest files: $ git pull b. Update the git configuration with any new submodules added recently: $ git submodule init c. Check out the correct version for all of the submodules: $ git submodule update [Next page](https://mangoh.discourse.group/t/application-is-not-installed-mangoh-red-wp8548/764.md?page=2)