Dear All, I have a problem following the getting started doc in order to set up the MangOH Red. I’m stricktly following the steps in the “GettingStartedWinCLI_r3.pdf” file (for windows) and I’m not able to see the applications gpioExpanderServiceRed, mqttClient and redSensorToCloud in my device (W…

Hello Francis, Thanks for your reply. I program the board with the following command: $ instsys mangOH_Red.wp85.update 192.168.2.2 After this command, the board is restarting (I can see the boot output in the console and the board doesn´t reply any ping). Some minutes later, the board reply norma…

You not see any error on the build ? I do that a lot of time without any problem. If the update failed the board roll back previous version of legato. Enter legato version and send the result

Send me a private messsge with your mail address. Tomorrow I will send step to restart with clean state

The only strange thing in the compilation is this message: mksys -t wp85 -s /home/mangoh/mangOH/apps/GpioExpander/gpioExpanderService -s /home/mangoh/mangOH/apps/RedSensorToCloud mangOH_Red.sdef ** Warning: Ignoring empty app specification ** Warning: Ignoring empty app specification [85/543] Ru…

For all user The problem was “the toolchain”. Yvan use new release R15 of WP8548. In the VM linux the toolchain is for R14 firmware. In this case, you must remove the old toolchain located in /opt/swi and install the new (available on the sierra website). After you must rebuild the legato and th…

Yvan, I have tested the new WP8548 R15 firmware. I use modifed linux kernel with CAN support. I have to rebuild the kernel (it take time). All is good.

Thanks a lot for your help Francis!! I´ve installed R14 in the WP8548 and all works fine.

MangOH Red Getting Started Problem

mangOH Red

Francis.duhaut January 24, 2018, 5:59pm 2

Hello Ivan

Did you program the mew mangOH build into your board ?

Did you restart the board ?

You can list the app installed with app status

Francis

WP8548 R15 firmware - build mangOH failed

Topic		Replies	Views
Make red_wp85, return ERROR mangOH Red	10	1767	March 12, 2018
gpioExpanderServiceRed, mqttClient and redSensorToCloud apps don't appear in the app status list mangOH Red	6	1255	February 22, 2018
MangOH master branch and Legato18.01 mangOH Red	6	806	February 21, 2018
[Solved] Build red_WP76xx fails mangOH Red	22	4096	April 10, 2019
Error starting redSensorToCloud [Solved] mangOH Red	14	2627	April 19, 2019

MangOH Red Getting Started Problem

Related topics